Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Heating / Cooling | for vehicles without oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 19 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 43 mm |
| Outer diameter | 25.5 mm |
| Number of Connectors / Ports | 4 |
| Colour Coding | Blue |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 4 832 217 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
| Housing Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | behind exhaust turbocharger |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | after soot particulate filter |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 724 mm |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | after soot particulate filter |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 03L 906 054 A |
| External Thread Size | M18 x 1,5 |
| Number of Connectors / Ports | 3 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Trailer Hitch | from 13-pin to 7-pin |
| Number of Poles | 7 -pin connector. 13 -pin connector |
| Function | Socket Adapter |
| Type | Socket Adapter |
| DIN / ISO | 11446, 1724 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Gas Spring, boot/cargo area |
| Placement on Vehicle | both sides |
| Length | 695 mm |
| Housing Diameter | 19 mm |
| Eject Force | 640 N |
| Stroke | 231 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 394.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with bolts/screws, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 6 |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
| Driver Position | for right-hand drive vehicles |
| Voltage | 12 V |
| Additional Information 2 | with cable |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 111 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, engine oil level |
| Additional Information | with gasket/seal |
| Extra Description | febi Plus |
| Type | Sensor, engine oil level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (04842)
Important compatibility info
| Cable Length | 720 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 434 mm |
| Paired article numbers | 37205 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36910)
- 1x Febi Inner Tie Rod (37203)
Important compatibility info
| Number of Connectors / Ports | 3 |
| Temperature range from | 92 °C |
| Temperature range to | 101 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (10248)
- 2x Febi Mounting, stabiliser bar (07200)
- 2x Febi Fastening Bolt, stabiliser bar (06858)
- 2x Febi Screw (01634)
- 4x Febi Screw (10247)
- 4x Febi Fastening Bolt, stabiliser bar (10249)
- 8x Febi Springwasher (01075)
- 4x Febi Nut (01697)
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Spanner Size | 24 |
| Colour | Brown |
| Number of Connectors / Ports | 1 |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
| Switch point from | 0.4 bar |
| Switch point to | 0.6 bar |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















