Important compatibility info
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
| Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
| Outer diameter | 60 mm |
| Material | Metal |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Resistor, interior blower |
| Number of Connectors / Ports | 4 |
| Function | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, exhaust pressure |
| Number of Connectors / Ports | 3 |
| Type | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 182166 |
| Steering arm type | Control Arm |
| Additional Information 2 | without ball joint |
| Cone Size | 26 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Stop- /Mounting Buffer |
| Type | Stop- /Mounting Buffer |
| Hole Spacing | 105 mm |
| Length | 300 mm |
| Width | 25 mm |
| Thickness | 56 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Type | Wiper Motor |
| Function | Wiper Motor |
| Additional Information 2 | with nut, with bolts/screws |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 98 163 385 80 |
| Placement on Vehicle | Right, Upper |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Thread Length | 27 mm |
| Material | Plastic |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Diameter | 1 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Outer diameter | 65 mm |
| Material | Metal |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Length | 498 mm |
| Placement on Vehicle | both sides |
| Housing length | 279 mm |
| Eject Force | 575 N |
| Piston conrod diameter | 8 mm |
| Stroke | 144 mm |
| Mounting points diameter | 18 mm |
| Housing Diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| for OE number | 51953754 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Paired article numbers | 182977 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Placement on Vehicle | Lower, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Cable Length | 115 mm |
| Type | Level switch, condensation water level |
| Function | Level switch, condensation water level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 2 374 003 |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, headlight levelling |
| Function | Sensor, headlight levelling |
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 317 mm |
| Diameter | 1 mm |
| Material | Steel |
| Paired article numbers | 184963 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left |
| Thread Length | 25 mm |
| Spanner Size | 15 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Spanner Size | 24 |
| Paired article numbers | 185155 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information 2 | with screw |
| Length | 138 mm |
| Placement on Vehicle | Front Axle Left, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


















