Important compatibility info
| Width | 30 mm |
| Number of Teeth | 120 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19540)
- 1x Febi Tensioner Pulley, timing belt (21706)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21708)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178790)
Important compatibility info
| Length | 117 mm |
| Width | 189 mm |
| Outer diameter | 82 mm. 66 mm |
| Thickness | 61 mm |
| Paired article numbers | 33574 |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (22438)
Important compatibility info
| Placement on Vehicle | Front Axle, both sides |
| Outer diameter | 34 mm. 46 mm |
| Thickness | 65 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Function | Bellow Kit, steering |
| Inner diameter 1 | 14 mm |
| Length | 213 mm |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (104849)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38755)
Important compatibility info
| Pipe Diameter | 9 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Right |
| Length | 80 mm |
| Paired article numbers | 33649 |
| Rod/Strut | Coupling Rod |
| External Thread Size | M10 x 1,25 |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25, M10 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 107 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Thickness | 90 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bush Set, axle beam |
| Type | Bush Set, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Width | 115 mm |
| Thickness | 85 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Outer Length | 115 mm |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, non-steered leading axle |
| Length | 148.8 mm |
| Outer diameter | 75 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 17 mm |
| Function | Repair Kit, control/trailing arm |
| Type | Repair Kit, control/trailing arm |
| Additional Information 2 | with spacer disc, with retaining ring |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Inner diameter | 30 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle, Front Axle |
| Outer diameter 2 | 110 mm |
| Outer diameter 1 | 105 mm |
| Height | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material, with gasket/seal |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Function | Actuator, headlight levelling |
| Extra Description | febi Plus |
| Type | Actuator, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 170 mm |
| Width | 78 mm |
| Material | Rubber |
| Thickness | 42 mm |
| Mounting points diameter | 8.5 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Inner diameter | 19 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 35 mm |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Inner diameter | 18 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 187 mm |
| Material | Steel |
| Spanner Size | 18 |
| Paired article numbers | 43318 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 187 mm |
| Material | Steel |
| Spanner Size | 18 |
| Paired article numbers | 43317 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 44924 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31970)
- 1x Febi Tie Rod End (31972)
- 1x Febi Bellow Kit, steering (44797)
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 206. 136 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G68HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rail, oil pump drive chain (40447)
- 1x Febi Chain, oil pump drive (39967)
- 1x Febi Tensioner, timing chain (40473)
- 1x Febi Timing Chain (39965)
- 1x Febi Guide, timing chain (40449)
- 1x Febi Guide, timing chain (40407)
- 1x Febi Guide, timing chain (40459)
- 1x Febi Guide, timing chain (40448)
- 1x Febi Chain Tensioner, oil pump drive (40462)
Important compatibility info
| Placement on Vehicle | Upper Left |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| for OE number | 204 501 05 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 23 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | 48124 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Right |
| Length | 150 mm |
| Material | Steel |
| Outer diameter | 8 mm |
| Spanner Size | 14 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front, Rear, Front Axle Right |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (31091)
- 2x Febi Mounting, control/trailing arm (31092)
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Inner diameter | 14 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
| Thickness | 79 mm |
| Outer diameter | 82 mm |
| Type | Bushing, axle beam |
| Replaces | 30404 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Flange |
| for OE number | 11 12 7 810 707 |
| Additional Information | with gasket/seal |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Length | 530 mm |
| Width | 333 mm |
| Function | Housing Cover, crankcase |
| Extra Description | febi Plus |
| Type | Housing Cover, crankcase |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 22 mm |
| Mounting points diameter | 17 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Outer diameter | 60 mm |
| Inner diameter | 17 mm |
| Function | Deflection/Guide Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width 1 | 24.3 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 52 mm |
| Width | 22.3 mm |
| Inner diameter | 20 mm |
| Inner diameter 1 | 35 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter 1 | 72 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 100 mm |
| Diameter | 11 mm |
| Material | Steel |
| Thickness | 11 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Number of Connectors / Ports | 2 |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 8 mm |
| Inner diameter | 10 mm |
| Outer diameter | 65 mm |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material, with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (100702)
- 1x Febi Rolling Bearing, suspension strut support mount (183292)
- 3x Febi Screw (186445)
- 1x Febi Nut (37805)
Important compatibility info
| Thickness | 2.5 mm |
| Inner diameter | 15 mm |
| Placement on Vehicle | Rear Axle |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (23356)
- 2x Febi Bracket, stabiliser mounting (23604)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 17 mm |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (27640)
- 1x Febi Bracket, stabiliser mounting (37145)
- 1x Febi Bracket, stabiliser mounting (37146)
- 4x Febi Screw (37063)
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M16 x 1,5 |
| Length | 127 mm |
| Replaces | 26255 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Function | Inner Tie Rod |
| Length | 279 mm |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 32627 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (26045)
- 1x Febi Tie Rod End (26097)
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 87 °C |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 050 121 113 C S3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (17910)
- 1x Febi Seal, thermostat (17966)
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 104 mm |
| Function | Mounting, stabiliser bar |
| Outer diameter | 95 mm. 103 mm |
| Inner diameter | 65 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle |
| Outer diameter | 70 mm. 77 mm |
| Thickness | 82 mm |
| Inner diameter | 16 mm |
| Paired article numbers | 27518 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Combi Switch Function | with cruise control, with high beam function, with indicator function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 448 mm |
| Paired article numbers | 49044 |
| Function | Tie Rod |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37594)
- 1x Febi Inner Tie Rod (26045)
- 1x Febi Bellow, steering (31054)
- 1x Febi Clamping Clip (38762)
- 1x Febi Clamping Clip (38756)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 93 mm |
| Material | Rubber/Metal |
| Colour Coding | Blue |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1807 GW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (47641)
- 1x Febi Rolling Bearing, suspension strut support mount (29475)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 89 mm |
| Width | 48 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 33 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 96 mm |
| Outer diameter 2 | 161 mm. 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (174797)
Important compatibility info
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 175398 |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































