Proud to be a UK-based company
Contact us
Important compatibility info
| Wire Diameter | 13.5 mm |
| Weight | 3.0 kg |
| Placement on Vehicle | Front Axle |
| Length | 347 mm |
| Function | Suspension Spring |
| Outer diameter | 147 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.99
Important compatibility info
| Screw length below head | 25 mm |
| Outer diameter | 23.7 mm |
| Material | Steel |
| Length | 51 mm |
| Weight | 0.350 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Spanner Size | 17, 19 |
| Thread Length | 23 mm |
| Quality/ Grade | 8.8 |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Bolt |
| External Thread Size | M14 x 1,25 |
| Type | Wheel Bolt |
| Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.09
Important compatibility info
| External Thread Size | M10 x 1 |
| Length | 37 mm |
| Material | Brass |
| Outer diameter | 8 mm |
| Spanner Size | 13 |
| Thread Length | 9.7 mm |
| Number of Connectors / Ports | 1 |
| Switch Point | 120 °C |
| Function | Sensor, coolant temperature |
| Weight | 0.014 kg |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.46
Important compatibility info
| Weight | 0.005 kg |
| Length | 14 mm |
| Outer diameter | 14 mm |
| Inner diameter | 12 mm |
| Function | Bush, starter shaft |
| Type | Bush, starter shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.53
Important compatibility info
| Weight | 1.7 kg |
| Material | Rubber |
| Function | Seal, windscreen |
| Type | Seal, windscreen |
| Styling | without trim strip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.86
Important compatibility info
| Weight | 0.644 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 66 mm |
| Inner diameter | 34 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with retaining rings, with Split Pin |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (04815)
- 1x Febi Split Pin (02877)
- 2x Febi Circlip (03273)
£18.66
Important compatibility info
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 5 |
| Weight | 0.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.29
Important compatibility info
| Placement on Vehicle | engine sided |
| Weight | 0.231 kg |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.30
Important compatibility info
| Outer diameter | 31 mm |
| Thickness | 3.8 mm |
| Function | Adjusting Disc, valve clearance |
| Weight | 0.022 kg |
| Type | Adjusting Disc, valve clearance |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.88
Important compatibility info
| Weight | 8.5 kg |
| Recommended additional repairs | Repair kit |
| Charge Type | Exhaust Turbocharger, Turbocharger Exhaust Manifold Unit (integral manifold) |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | BorgWarner Turbo NEW |
| Manufacturer | BorgWarner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£703.19
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 44 mm |
| Outer diameter | 80.9 mm |
| Inner diameter | 27.6 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Bearing Kit |
| Weight | 2.73 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
| Outer diameter 1 | 64.1 mm |
| Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.094 kg |
| Placement on Vehicle | frontal sided |
| Length | 65 mm |
| Material | Steel |
| Outer diameter | 29 mm |
| Surface | Phosphatized |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 12.9 |
| Function | Pulley Bolt |
| Screw length below head | 47 mm |
| Type | Pulley Bolt |
| Thread Length | 42.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.79
Important compatibility info
| Weight | 0.06 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.62
Important compatibility info
| Weight | 0.210 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 90 mm |
| Material | Aluminium |
| Paired article numbers | 17214 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.35
Important compatibility info
| Weight | 0.413 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.39
Important compatibility info
| Weight | 0.5 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 4899 469 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.45
Important compatibility info
| Weight | 1.634 kg |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 0.936 kg |
| Placement on Vehicle | Rear Axle |
| Length | 123.1 mm. 121.9 mm |
| Width | 45 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.25
Important compatibility info
| Weight | 1.227 kg |
| Placement on Vehicle | Right |
| Paired article numbers | 26801 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.81
Important compatibility info
| Weight | 9.66 kg |
| Length | 915 mm |
| Material | Steel |
| Function | Centre Rod Assembly |
| Pipe Diameter | 40 mm. 50 mm |
| Cone Size | 30 mm |
| Thickness | 118 mm |
| Spanner Size | 36 |
| Rod/Strut | Push Rod |
| Colour | Black |
| Driver Position | for right-hand drive vehicles |
| Thread Length | 27.2 mm. 80 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Switch, engine brake |
| Type | Switch, engine brake |
| Number of Connectors / Ports | 2 |
| Weight | 0.046 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.74
Important compatibility info
| Weight | 0.065 kg |
| Material | Silicone |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Length | 175 mm |
| Diameter | 12 mm |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Weight | 0.259 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.58
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Weight | 6.383 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Shore-A hardness value, base body | 65 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.41
Important compatibility info
| Weight | 0.095 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.130 kg |
| Cable Length | 907 mm |
| Number of circuits | 6 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.63
Important compatibility info
| Height | 23 mm |
| Spanner Size | 105 |
| Weight | 0.58 kg |
| Type | Nut, kingpin |
| Function | Nut, kingpin |
| Internal Thread Size | M86 x 2 |
| Material | Steel |
| Surface | Phosphatized |
| Bolt Head/Nut Design | Male Hex |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.78
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
| Weight | 0.037 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.91
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197191 |
| Number of Connectors / Ports | 6 |
| Weight | 1.0 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£143.27
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Weight | 0.03 kg |
| Cable Length | 653 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023