Important compatibility info
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
| Length | 1652 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Function | Bearing, clutch lever |
| Outer diameter | 30.5 mm |
| Type | Bearing, clutch lever |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 11 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| for OE number | 51.06500.6432 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 252 mm |
| Outer diameter | 36 mm. 50 mm |
| Function | Repair Kit, kingpin |
| External Thread Size | M36 x 1,5 |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10500)
- 1x Febi Bush, kingpin (14467)
- 1x Febi Washer (10502)
- 1x Febi Seal Ring, steering knuckle (14459)
- 1x Febi Seal Ring, steering knuckle (14432)
- 1x Febi Spacer, kingpin (14460)
- 1x Febi Seal Ring, steering knuckle (14461)
- 1x Febi Seal Ring (14462)
- 2x Febi Spacer, kingpin (14463)
- 4x Febi Spacer, kingpin (14464)
- 2x Febi Spacer, kingpin (14465)
- 2x Febi Spacer, kingpin (14466)
- 1x Febi Split Pin (14433)
Important compatibility info
| Length | 45.5 mm |
| Outer diameter | 6.5 mm |
| Function | Spring Retaining Pin, brake shoe |
| Type | Spring Retaining Pin, brake shoe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Holder, brake camshaft seal ring (07480)
- 2x Febi Bearing, brake camshaft (07479)
- 3x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Spacer, brake shaft (07485)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07491)
- 1x Febi Spacer, brake shaft (07487)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 2x Febi Grease Nipple (06533)
- 1x Febi Spacer, brake shaft (07490)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 125 mm |
| Thread Type | with right-hand thread |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, stabiliser bar |
| Inner diameter | 32 mm |
| Outer diameter | 44 mm. 54 mm |
| Placement on Vehicle | Front Axle |
| Material | Plastic |
| Function | Mounting, stabiliser bar |
| Colour | White |
| Length | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Steel |
| Outer diameter | 36 mm |
| Thickness | 22 mm |
| Spanner Size | 30 |
| Surface | Phosphatized |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10 |
| DIN / ISO | 74361 |
| Bolt / Nut Version | Countersunk Head |
| Wheel Fastening | Flat Seat |
| Type | Wheel Nut |
| Function | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pressure | 6.5 bar |
| Type | Oil Pressure Valve |
| Function | Oil Pressure Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 140 mm |
| Bolt / Nut Version | Stretch Bolt |
| Function | Cylinder Head Bolt |
| Quality/ Grade | 12.9 |
| Surface | Phosphatized |
| Material | Steel |
| Bolt Head/Nut Design | Male Torx |
| Spanner Size | M 14 |
| Shaft Length | 70 mm |
| Thread Length | 70 mm |
| External Thread Size | M14 x 2 |
| Type | Cylinder Head Bolt |
| Screw length below head | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 4.5 mm |
| Inner diameter | 30 mm |
| Colour | Black |
| Type | Seal Ring |
| Function | Seal Ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, outer, Rear Axle Right |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 175 mm |
| Thickness | 14 mm |
| Inner diameter | 145 mm |
| Type | Shaft Seal, wheel hub |
| Function | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 20 mm |
| Function | Washer |
| Thickness | 2.5 mm |
| Type | Washer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
| for OE number | 424694 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PA (polyamide) |
| Internal Thread Size | M18 x 1,5 |
| Colour | Black |
| DIN / ISO | 74323 |
| Number of Coils | 19 |
| Working length | 4 m |
| Function | Spiral Hose |
| External Thread Size | M16 x 1,5 |
| Type | Spiral Hose |
| Additional Information 2 | with adapter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, spring bolt |
| Type | Repair Kit, spring bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Spring Bolt (03126)
- 1x Febi Bush, spring shackle (01491)
- 2x Febi Seal Ring (03994)
- 1x Febi Washer (03990)
- 1x Febi Washer (04835)
- 1x Febi Screw (02684)
- 1x Febi Washer (01965)
- 1x Febi Nut (02685)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (01098)
Important compatibility info
| Function | Repair Kit, spring bolt |
| Type | Repair Kit, spring bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Spring Bolt (01614)
- 1x Febi Bushing, leaf spring (01427)
- 2x Febi Seal Ring, spring bush (spring eye) (03993)
- 1x Febi Washer (03989)
- 1x Febi Washer (04837)
- 1x Febi Screw (02684)
- 1x Febi Washer (01965)
- 1x Febi Nut (02685)
- 1x Febi Grease Nipple (01096)
- 2x Febi Grease Nipple (01098)
Important compatibility info
| Function | Wheel Stud |
| Bolt Head Diameter | 40 mm |
| Surface | Zinc-coated |
| Thread Length | 52 mm |
| Quality/ Grade | 10.9 |
| Shaft Length | 25 mm |
| Length | 90 mm |
| Material | Steel |
| Screw length below head | 80 mm |
| External Thread Size | M18 x 2 |
| Rims | for Trilex® rim |
| Type | Wheel Stud |
| Additional Information | with spring |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Stud (05687)
- 1x Febi Wheel Nut (03641)
- 1x Febi Spring Cotter, wheel stud (03517)
Important compatibility info
| Function | Brake Shoe Pin Set |
| Type | Brake Shoe Pin Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe Bolt (05738)
- 2x Febi Washer (05776)
- 2x Febi Circlip, brake anchor pin (04767)
Important compatibility info
| Material | Steel |
| Surface | Phosphatized |
| Thread Length | 22 mm. 48 mm |
| Quality/ Grade | 10.9 |
| Length | 112 mm |
| Shaft Length | 17 mm |
| Bolt Head Diameter | 32 mm |
| Function | Wheel Stud |
| Screw length below head | 46 mm. 60 mm |
| External Thread Size | M22 x 1,5 |
| Type | Wheel Stud |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Stud (05751)
- 1x Febi Wheel Nut (06425)
- 1x Febi Wheel Nut (04029)
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fastening Bolt, stabiliser bar (06063)
- 1x Febi Joint Bearing, connector rod (06066)
- 2x Febi Seal Ring (06069)
- 2x Febi Sleeve, stabiliser mounting (06064)
- 1x Febi Washer (06067)
- 1x Febi Washer (06068)
- 1x Febi Nut (01563)
- 1x Febi Grease Nipple (01096)
- 2x Febi Circlip (06065)
Important compatibility info
| Outer diameter | 50 mm |
| Length | 109 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Upper Front Axle, both sides |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05870)
- 1x Febi Bush, kingpin (05871)
- 1x Febi Seal Ring, steering knuckle (05872)
- 1x Febi Screw Plug, oil sump (05410)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Spacer, kingpin (05873)
- 1x Febi Circlip (04561)
Important compatibility info
| Placement on Vehicle | Lower Front Axle, both sides |
| Length | 119 mm |
| Outer diameter | 50 mm. 64 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05876)
- 1x Febi Bush, kingpin (05877)
- 1x Febi Seal Ring, steering knuckle (05878)
- 1x Febi Circlip (06065)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Lock Ring, steering knuckle (05880)
- 1x Febi Lock Ring, steering knuckle (03813)
- 1x Febi Seal Ring (05881)
Important compatibility info
| Length | 121.5 mm |
| Outer diameter | 65 mm |
| Function | Bush, spring eye |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 30 mm |
| Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 65.0 mm |
| Spanner Size | 36 |
| Surface | Phosphatized |
| Weight | 0.269 kg |
| Inner thread | M24 x 3 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 6 |
| Type | Spring Clamp Nut |
| Function | Spring Clamp Nut |
Important compatibility info
| Function | Cap, fuel tank |
| Lock System | with two keys, with lock |
| Outer diameter | 60 mm |
| Additional Information | with chain |
| Colour | Black |
| Type | Cap, fuel tank |
| Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Opening Pressure | 0.4 bar |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 36.5 mm |
| Outer diameter | 35 mm |
| Inner diameter | 32 mm |
| Type | Bushing, brake shaft |
| Function | Bushing, brake shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cap, fuel tank |
| Outer diameter | 113 mm |
| Material | Aluminium |
| Outer diameter 1 | 86.5 mm |
| Type | Cap, fuel tank |
| Lockable | Lockable |
| Lock System | with two keys, with lock |
| Additional Information | with chain, with valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 24.5 mm |
| Outer diameter | 72 mm |
| Inner diameter | 35 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Bearing Code | 32207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Thread Type | with left-hand thread |
| Cone Size | 28.6 mm |
| Colour | Grey |
| Thread Length | 85 mm |
| Placement on Vehicle | Front Axle Left |
| Length | 120 mm |
| Material | Steel |
| Outer diameter | 23.5 mm. 69 mm |
| Thickness | 120 mm |
| Spanner Size | 30 |
| Paired article numbers | 06240 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M30 x 1,5 LHT, M20 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Colour | Grey |
| Outer diameter | 24 mm. 70 mm |
| Material | Steel |
| Spanner Size | 30 |
| Paired article numbers | 06239 |
| External Thread Size | M30 x 1,5 RHT, M20 x 1,5 |
| Cone Size | 28.6 mm |
| Thread Type | with right-hand thread |
| Thickness | 120 mm |
| Length | 120 mm. 87 mm |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Angled Ball Joint, steering push rod |
| Thread Type | with right-hand thread |
| External Thread Size | M30 x 1,5 RHT, M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 120 mm |
| Paired article numbers | 03941 |
| Cone Size | 31.5 mm |
| Extra Description | ProKit |
| Type | Angled Ball Joint, steering push rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 06284 |
| Material | Plastic |
| Outer diameter | 60 mm |
| Type | Cap, fuel tank |
| Function | Cap, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cap, fuel tank |
| Colour | Black |
| Outer diameter | 91 mm. 80 mm |
| Type | Cap, fuel tank |
| Additional Information | with gasket/seal |
| Lockable | Lockable |
| Lock System | with two keys, with lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 80 mm |
| Function | Cap, fuel tank |
| Additional Information | with chain |
| Type | Cap, fuel tank |
| Lock System | without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 102 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Width of castor bearing surface | 50 mm |
| Outer diameter | 95 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Opening Pressure | 0.7 bar |
| for OE number | 000 501 72 15 64 |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 175 mm |
| Thickness | 14 mm |
| Inner diameter | 145 mm |
| Function | Shaft Seal, wheel hub |
| Additional Information 2 | with ABS sensor ring |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| for OE number | 620 320 00 28 |
| Function | Repair Kit, stabiliser bush |
| Type | Repair Kit, stabiliser bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, stabiliser bar (06728)
- 4x Febi Mounting, stabiliser bar (06727)
- 4x Febi Mounting, stabiliser bar (04759)
- 2x Febi Mounting, stabiliser bar (06716)
- 2x Febi Washer (05267)
- 2x Febi Washer (06861)
- 2x Febi Circlip (04760)
- 2x Febi Nut (05054)
- 2x Febi Nut (06878)
Important compatibility info
| Function | Gasket Set, wheel hub |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (15551)
- 1x Febi Seal Ring, wheel hub (06763)
- 1x Febi Circlip (06761)
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Height | 365 mm |
| Inner diameter | 191 mm |
| Outer diameter | 303 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Height | 485 mm |
| Outer diameter | 242 mm |
| Inner diameter | 132 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Outer diameter | 227 mm |
| Inner diameter | 117 mm |
| Height | 370 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 340 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Outer diameter | 165 mm |
| Inner diameter | 85 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 365 mm |
| Outer diameter | 197 mm |
| Inner diameter | 103 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 570 mm |
| Outer diameter | 271 mm |
| Inner diameter | 177 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































