Important compatibility info
| Width | 13 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 175 mm |
| Inner diameter | 145 mm |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 75 mm |
| Outer diameter | 39.8 mm. 46 mm |
| Spanner Size | 19 |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 2 |
| Control Range | 0,25+0,15 bar |
| Function | Sensor, oil pressure |
| Switch point to | 5 bar |
| for OE number | 001 542 56 17 |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, oil pressure |
| Switch | with alarm switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front and Rear |
| Outer diameter | 55 mm |
| External Thread Size | M8 x 1,25 |
| Function | Rubber Buffer, driver cab |
| Type | Rubber Buffer, driver cab |
| Height | 45 mm |
| Thread Length | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Cone Size | 30 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Outer diameter | 52 mm |
| Length | 1059 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 142 mm |
| Brake Disc Thickness | 16 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 14.5 mm |
| Bolt Hole Circle Diameter | 170 mm |
| Surface | Coated |
| Function | Brake Disc |
| Additional Information 2 | with wheel studs |
| External Thread Size | M18 x 1,5 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with wheel studs |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Bolt Hole Circle Diameter | 205 mm |
| Brake Disc Thickness | 25.2 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 23 mm |
| Thickness | 160 mm |
| Function | Brake Disc |
| Surface | Coated |
| External Thread Size | M18 x 1,5 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Bolt Hole Circle Diameter | 170 mm |
| Additional Information 2 | with wheel studs |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 84 mm |
| Brake Disc Thickness | 22 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 19 mm |
| Centering Diameter | 125 mm |
| Surface | Coated |
| Function | Brake Disc |
| External Thread Size | M18 x 1,5 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 290 mm |
| Thickness | 84.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 84 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 8 -Hole |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 79 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | Coated |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 304 mm |
| Thickness | 128 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 6 |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 205 mm |
| Function | Brake Disc |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 322 mm |
| Thickness | 134 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 8 |
| Minimum thickness | 27.75 mm |
| Bolt Hole Circle Diameter | 275 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 276 mm |
| Thickness | 69.4 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 46 mm |
| Function | Repair Kit, guide strut |
| Outer diameter | 65 mm. 70 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with grease |
| Type | Repair Kit, guide strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Screw (35972)
- 1x Febi Ball Joint, axle strut (35986)
- 1x Febi Spacer Ring (35988)
- 1x Febi Lock Ring, steering knuckle (35990)
- 2x Febi Seal Ring (35991)
- 1x Febi Lock Ring, steering knuckle (35992)
- 1x Febi Fastening Clamp (35993)
- 1x Febi Spacer Disc, connector rod (35994)
- 1x Febi Circlip (35995)
Important compatibility info
| Length | 320 mm |
| Height | 25 mm |
| Width | 237 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 428 mm |
| Height | 24 mm |
| Width | 170 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width 2 | 135 mm |
| Function | Bush, parabolic spring |
| Length | 230 mm. 210 mm |
| Thickness | 152 mm |
| Width 1 | 165 mm |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 120 mm |
| Function | Bush, parabolic spring |
| Width | 165 mm. 135 mm |
| Length | 230 mm. 210 mm |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 17498 |
| Rotation Direction | Clockwise rotation |
| Function | Brake Shaft, drum brake |
| Placement on Vehicle | Front Axle Left |
| Type | Brake Shaft, drum brake |
| Length | 223 mm |
| Outer diameter | 98 mm |
| Number of Teeth | 26 |
| Screw length below head | 175 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Shaft, drum brake |
| Rotation Direction | Anticlockwise rotation |
| Paired article numbers | 17497 |
| Placement on Vehicle | Front Axle Right |
| Type | Brake Shaft, drum brake |
| Length | 223 mm |
| Outer diameter | 98 mm |
| Number of Teeth | 26 |
| Screw length below head | 175 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1008 mm |
| Outer diameter | 52 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Rear Axle, Outer |
| Function | Fastening Bolt, stabiliser bar |
| Outer diameter | 22 mm |
| Length | 100 mm. 75 mm |
| Type | Fastening Bolt, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Pneumatic |
| Max. Length | 315 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 81 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 230 mm |
| Colour | Yellow |
| DIN / ISO | 76051 |
| Length | 470 mm |
| Additional Information 2 | Handle in housing |
| Function | Wheel Chock |
| Width | 200 mm |
| Material | Plastic |
| Radius | 555 mm |
| Type | Wheel Chock |
| Axle Load to | 13 t |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 50 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Length | 1624 mm |
| Cone Size | 30 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Bottom Pin, Top eye |
| Max. Length | 382 mm |
| Min. Length | 309 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,5 |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 140 mm |
| Number of Holes | 8 |
| Outer diameter | 175 mm |
| Function | Seal, axle cap |
| Material | Cork |
| Type | Seal, axle cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 65 °C |
| Heating / Cooling | without vent hole |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, water pump (03505)
- 1x Febi Thermostat, coolant (18016)
Important compatibility info
| Surface | Coated |
| Function | Brake Disc |
| Brake Disc Type | Internally Vented |
| Number of Holes | 10 |
| Thickness | 82 mm |
| Minimum thickness | 26 mm |
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 354 mm |
| Bolt Hole Circle Diameter | 151 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, manual transmission |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 110 mm |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Thickness | 68 mm |
| Function | Mounting, engine |
| Internal Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| Replaces | 28169; 28170 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cap, fuel tank |
| Material | Plastic |
| External Thread Size | M64 |
| Type | Cap, fuel tank |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cap, fuel tank |
| External Thread Size | M65 x 6 |
| Type | Cap, fuel tank |
| Lockable | Lockable |
| Lock System | with two keys, with lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Outer diameter | 28 mm |
| Thickness | 30 mm |
| Inner diameter | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, guide strut |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Thickness | 60 mm |
| Additional Information | with grease, with ball stud |
| Type | Repair Kit, guide strut |
| Additional Information 2 | with bolts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.03 kg |
| Material | Plastic |
| Colour | Red |
| Number of Connectors / Ports | 7 |
| Function | Hazard Warning Light Switch |
| Control Type | Flip Switch Control |
| Extra Description | febi Plus |
| Type | Hazard Warning Light Switch |
| Placement on Vehicle | Dashboard |
| Housing Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, brake shaft (18184)
- 1x Febi Shaft Seal, brake camshaft (18186)
- 3x Febi Spacer, brake shaft (18171)
- 1x Febi Brake Shaft, drum brake (18212)
- 1x Febi Brake Shaft, drum brake (18213)
- 1x Febi Spacer, brake shaft (18188)
- 1x Febi Washer (04957)
- 1x Febi Warning Contact, brake pad wear (09217)
Important compatibility info
| Voltage | 28 V |
| Function | Alternator Regulator |
| Additional Information | with gasket/seal |
| Type | Alternator Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Front and Rear |
| Inner diameter | 35.5 mm |
| Shape/Form | slotted |
| Type | Bush, spring eye |
| Function | Bush, spring eye |
| Outer diameter | 61 mm |
| Material | Rubber/Metal |
| Length | 86 mm. 97.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 20 mm |
| Internal Thread Size | M60 x 2 |
| Spanner Size | 80 |
| Thread Type | with right-hand thread |
| Function | Nut, kingpin |
| Type | Nut, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| for OE number | 2 853 196 |
| Cone Size | 30 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Length | 1743 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Repair Kit, brake camshaft |
| Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, brake shaft (18249)
- 1x Febi Spacer, brake shaft (18251)
- 3x Febi Spacer, brake shaft (18171)
- 1x Febi Brake Shaft, drum brake (18212)
- 1x Febi Brake Shaft, drum brake (18213)
- 1x Febi Spacer, brake shaft (18188)
- 1x Febi Washer (04957)
- 1x Febi Shaft Seal, brake camshaft (18186)
- 1x Febi Warning Contact, brake pad wear (09217)
- 2x Febi Seal, brake shaft (17931)
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Washer (04957)
- 3x Febi Spacer, brake shaft (18171)
- 1x Febi Spacer, brake shaft (18188)
- 1x Febi Brake Shaft, drum brake (18213)
- 1x Febi Brake Shaft, drum brake (18212)
- 1x Febi Warning Contact, brake pad wear (09217)
- 2x Febi Seal, brake shaft (17931)
Important compatibility info
| Operating Mode | Electric |
| Function | Adapter, oil pressure switch / Adapter, pressure switch / Adapter, stop light switch |
| Type | Adapter, oil pressure switch / Adapter, pressure switch / Adapter, stop light switch |
| Length | 115 mm. 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 850 mm |
| Outer diameter | 42 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 42 mm |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 31.5 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Driver Position | for right-hand drive vehicles |
| Length | 861 mm |
| Cone Size | 28.6 mm |
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 52 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with crown nut |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Length | 1645 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Pipe Diameter | 42 mm |
| Cone Size | 28.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Steering Lock |
| Number of Connectors / Ports | 4 |
| Operating Mode | Electric |
| Type | Steering Lock |
| Lock System | with two keys, with lock barrel |
| Additional Information 2 | with bolts/screws, with switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, kingpin |
| Outer diameter | 28 mm. 35 mm |
| Length | 178 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































