Important compatibility info
Internal Thread Size | 1 x M26 x 1,5, 3 x M16 x 1,5 |
Weight | 2.743 kg |
Operating Mode | Hydraulic |
Rotation Direction | Clockwise rotation |
Pressure | 180 bar |
Type | Hydraulic Pump, steering |
Function | Hydraulic Pump, steering |
for OE number | 002 460 08 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Weight | 7.7 kg |
Function | Centre Rod Assembly |
Pipe Diameter | 50 mm |
Cone Size | 26 mm |
Rod/Strut | Push Rod |
Outer diameter | 40 mm |
Length | 857 mm |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Number of Connectors / Ports | 3 |
Weight | 0.183 kg |
Type | Mass Air Flow Sensor |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Additional Information | with spring |
Additional Information 2 | with screw |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 84.7 mm |
Wheel Sided Joint Diameter | 85.6 mm |
Min. Length | 782 mm |
External Teeth, Diff.Side | 27 |
Thread Size | M16x1,5 |
Paired article numbers | 183675 |
External Teeth, Wheel Side | 31 |
Weight | 7.182 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 11.2 kg |
Internal Thread Size | M22 x 1,5 |
Length | 605 mm |
Material | Steel |
Outer diameter | 310 mm |
Capacity | 40 l |
Operating Pressure | 12.5 bar |
Type | Air Tank, compressed-air system |
Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | outer, Rear, Rear Axle Left, Rear Axle Right, Upper |
Outer diameter | 50.3 mm |
Inner diameter | 14.2 mm |
Thickness | 50 mm |
Material | Rubber/Metal |
Weight | 0.253 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 122 mm |
Weight | 0.288 kg |
Height | 41 mm |
Width | 95 mm |
Number of Ribs | 10 |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 33 mm |
Filter type | Filter Insert |
Function | Fuel filter |
Weight | 9.1 kg |
Height | 82 mm |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Front |
Material | Aluminium |
Additional Information 2 | with ball joint, with rubber mount |
Steering arm type | Control Arm |
Paired article numbers | 185795 |
Weight | 3.182 kg |
Cone Size | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 22 mm |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 153 mm |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,25 |
Function | Tie Rod End |
Type | Tie Rod End |
Weight | 0.582 kg |
Paired article numbers | 180276 |
Spanner Size | 17 |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Valve, crankcase ventilation |
Extra Description | febi Plus |
Function | Valve, crankcase ventilation |
Weight | 0.046 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Additional Information | with rubber mounts |
Material | Aluminium |
Steering arm type | Trailing Arm |
Weight | 4.052 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.01 kg |
Type | Valve Plate, air compressor |
Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 310 mm |
Diameter | 1 mm |
Additional Information | with nuts |
Material | Steel |
Thickness | 9 mm |
Paired article numbers | 194953 |
Rod/Strut | Coupling Rod |
Thread Length | 23 mm |
Weight | 0.338 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Weight | 0.08 kg |
for OE number | 61 66 1 377 830 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 22020 |
Weight | 0.330 kg |
Placement on Vehicle | Front Axle Right |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.31 kg |
Rim Hole Number | 5 -Hole |
Rotor Style | internally vented, slotted/perforated |
Placement on Vehicle | Rear Axle |
Outer diameter | 330 mm |
Thickness | 41.4 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Machining | High-carbon |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.440 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 24 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178944 |
Weight | 1.69 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.236 kg |
Function | Thermostat Housing |
Additional Information | with gasket/seal |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Pump |
Function | Oil Pump |
Weight | 0.830 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Function | Cap, coolant tank |
Material | Plastic |
Opening Pressure | 1.4 bar |
Type | Cap, coolant tank |
for OE number | 1306.C7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.058 kg |
Placement on Vehicle | transmission sided |
Material | FPM (fluoride rubber) |
Outer diameter | 105 mm |
Thickness | 11 mm |
Inner diameter | 85 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 93.5 mm |
Operating Mode | Mechanical |
Housing material | Metal |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Weight | 0.52 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Tensile Cord Material | Aramid |
Function | V-Ribbed Belt |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Alternator type | for starter generator |
Weight | 0.194 kg |
Length | 1986 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Repair Kit, suspension strut support mount |
Weight | 0.990 kg |
Additional Information 2 | with ball bearing |
Material | Rubber/Metal |
Function | Repair Kit, suspension strut support mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (180355)
- 1x Febi Rolling Bearing, suspension strut support mount (193828)
Important compatibility info
Function | Brake Shaft, drum brake |
Extra Description | febi Plus |
Type | Brake Shaft, drum brake |
Screw length below head | 457 mm |
Number of Teeth | 10 |
Length | 507 mm |
Outer diameter | 110 mm |
Weight | 5.5 kg |
Shape/Form | S Shape |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with exhaust manifold |
Paired article numbers | 186816 |
Weight | 10.0 kg |
Recommended additional repairs | Repair kit |
Charge Type | Exhaust Turbocharger, regulated two-stage charging, First stage of the two-stage charging, High-pressure level 1 |
Type | Charger, charging (supercharged/turbocharged) |
Additionally required parts | Mounting Kit |
Function | Charger, charging (supercharged/turbocharged) |
Extra Description | Garrett Turbo NEW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.234 kg |
Placement on Vehicle | Right |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.415 kg |
Material | Aluminium |
Inner diameter | 35 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (26264)
- 1x Febi Bearing, propshaft centre bearing (21311)
Important compatibility info
Placement on Vehicle | Front Axle |
Rotor Style | Solid |
Weight | 4.68 kg |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 139.7 mm |
Surface | Coated |
Centering Diameter | 107 mm |
Function | Brake Disc |
Outer diameter | 290 mm |
Thickness | 46 mm |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.43 kg |
Length | 109 mm |
Material | Rubber |
Inner diameter 1 | 21 mm |
Inner diameter 2 | 94 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Replaces | 07287 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03334)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (03336)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Rear Axle, Right |
Material | Rubber/Metal |
Outer diameter | 41.5 mm |
Thickness | 52 mm |
Inner diameter | 22 mm |
Paired article numbers | 172379 |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Weight | 0.158 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 177064 |
Weight | 3.35 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Glow Plug Type | after-glow capable |
Type | Glow Plug |
Function | Glow Plug |
Voltage | 11 V |
Spanner Size | 10 |
Length | 82 mm |
External Thread Size | M10 x 1 |
Weight | 0.053 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.7 kg |
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 178613 |
External Thread Size | M12 x 1,25 |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 50 mm |
Function | Tilt Cylinder, driver cab |
Weight | 6.5 kg |
Number of Connectors / Ports | 2 |
Length | 553 mm |
Placement on Vehicle | Right |
Stroke | 334 mm |
Mounting points diameter | 32 mm. 20 mm |
Type | Tilt Cylinder, driver cab |
Paired article numbers | 194450 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.68 kg |
Number of screws | 14 |
Length | 164 mm |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10.9 |
External Thread Size | M12 x 1,75 |
Function | Cylinder Head Bolt Set |
Screw length below head | 157 mm |
Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (04432)
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 2.5 kg |
Type | Tilt Pump, driver cab |
Function | Tilt Pump, driver cab |
Pressure side external thread size | M14 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Metal |
Internal Thread Size | M16 x 1,5 |
Gasket inner diameter | 61.5 mm |
Gasket outer diameter | 68.5 mm |
Function | Fuel Filter |
Type | Fuel Filter |
Height | 139 mm |
Outer diameter | 81 mm |
Filter type | Spin-on Filter, with water drain screw |
Weight | 0.39 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.636 kg |
Placement on Vehicle | Front Axle |
Length | 148.9 mm |
Width | 59 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 63.4 mm |
Width | 77.6 mm |
Brake System | Lucas |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.5 mm |
Function | Brake Pad Set, disc brake |
Weight | 2.260 kg |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Placement on Vehicle | Front Axle |
Material | PU (Polyurethane) |
Thickness | 85 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 110 200 17 20 |
Weight | 1.04 kg |
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.150 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 50 mm |
Width | 39 mm |
Material | Rubber/Metal |
Thickness | 50 mm |
Inner diameter | 18 mm |
Type | Bushing, stabiliser bar |
Function | Bushing, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Length | 1185 mm |
Paired article numbers | 188454 |
Weight | 0.350 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Bearing Type | Tapered Roller Bearing |
Inner diameter | 49 mm |
Weight | 1.0 kg |
Width | 48 mm |
Outer diameter | 84 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber, Rubber with fabric lining |
Inner diameter | 24 mm |
Placement on Vehicle | Front Axle, inner |
Weight | 0.060 kg |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.171 kg |
Outer diameter | 40 mm |
Thickness | 45 mm |
Inner diameter | 12.2 mm |
Placement on Vehicle | Rear Axle Left, inner, Upper, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.357 kg |
Placement on Vehicle | Lower Front Axle, Rear |
Material | Rubber/Metal |
Outer diameter | 64 mm |
Thickness | 63 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023