Important compatibility info
| Length | 300 mm. 320 mm | 
| Function | Corrugated Pipe, exhaust system | 
| Inner diameter | 80 mm | 
| Outer diameter | 84 mm | 
| Type | Corrugated Pipe, exhaust system | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 310 mm. 380 mm | 
| Outer diameter | 114 mm | 
| Inner diameter | 110 mm | 
| Function | Corrugated Pipe, exhaust system | 
| Type | Corrugated Pipe, exhaust system | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 80 mm | 
| Thread Type | with right-hand thread | 
| Function | Tie Rod End | 
| Extra Description | ProKit | 
| Type | Tie Rod End | 
| Internal Thread Size | M16 x 1,5 RHT | 
| External Thread Size | M14 x 1,5 | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Ball Joint | 
| External Thread Size | M20 x 1,5, M18 x 1,5 | 
| Type | Ball Joint | 
| Steering arm type | for control arm | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Centre Rod Assembly | 
| Pipe Diameter | 42 mm | 
| Cone Size | 26 mm | 
| Colour | Red | 
| Rod/Strut | Push Rod | 
| Outer diameter | 42 mm | 
| Length | 897 mm | 
| Placement on Vehicle | Front Axle | 
| Internal Thread Size | M30 x 1,5 | 
| Driver Position | for left-hand/right-hand drive vehicles | 
| Extra Description | ProKit | 
| External Thread Size | M20 x 1,5 | 
| Type | Centre Rod Assembly | 
| Additional Information 2 | with crown nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cylinder Head, air compressor | 
| Type | Cylinder Head, air compressor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 141 mm | 
| Thickness | 38 mm | 
| Function | Cylinder Head, air compressor | 
| Width | 130 mm | 
| Type | Cylinder Head, air compressor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 114 mm | 
| Inner diameter | 110 mm | 
| Function | Corrugated Pipe, exhaust system | 
| Length | 443 mm | 
| Type | Corrugated Pipe, exhaust system | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Type | with right-hand thread | 
| Function | Ball Joint, axle strut | 
| Spanner Size | 32 | 
| Rod/Strut | Guide Rod | 
| Length | 70 mm | 
| Internal Thread Size | M20 x 1,5 | 
| Extra Description | ProKit | 
| Type | Ball Joint, axle strut | 
| External Thread Size | M18 x 1,5 | 
| Cone Size 2 | 24 mm | 
| Cone Size 1 | 21.5 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, automatic transmission / Mounting, manual transmission | 
| Placement on Vehicle | both sides | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Type | Mounting, automatic transmission / Mounting, manual transmission | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| for OE number | 0 550 812 | 
| Length | 130 mm | 
| Outer diameter | 67 mm | 
| Mounting points diameter | 17 mm | 
| Function | Repair Kit, control/trailing arm | 
| Steering arm type | for trailing arm | 
| Type | Repair Kit, control/trailing arm | 
| Additional Information 2 | with spacer disc, with retaining ring | 
| Hole Spacing | 100 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 295 mm | 
| Function | Warning Contact Set, brake pad wear | 
| Type | Warning Contact Set, brake pad wear | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Warning Contact, brake pad wear (15218)
Important compatibility info
| Number of Wings | 7 | 
| Number of Teeth | 23 | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Grey Cast Iron | 
| Housing material | Grey Cast Iron | 
| Seal Material | Rubber | 
| Type | Water Pump, engine cooling | 
| Additional Information | with gaskets/seals | 
| Additional Information 2 | with gear | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT | 
| Placement on Vehicle | Front Axle | 
| Function | Centre Rod Assembly | 
| Colour | red/brown | 
| Length | 901 mm | 
| Outer diameter | 50 mm | 
| Pipe Diameter | 50 mm | 
| Cone Size | 30 mm | 
| Rod/Strut | Push Rod | 
| External Thread Size | M24 x 1,5 | 
| Driver Position | for left-hand/right-hand drive vehicles | 
| Extra Description | ProKit | 
| Type | Centre Rod Assembly | 
| Additional Information 2 | with crown nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 953 mm | 
| Outer diameter | 52.0 mm | 
| Rod/Strut | Push Rod | 
| Outer thread | M24 x 1,5 mm | 
| Colour | red/brown | 
| Driver Position | for left-hand drive vehicles | 
| Weight | 10.000 kg | 
| Inner thread | M30 x 1,5 mm | 
| Cone Size | 30 mm | 
| Pipe Diameter | 52 mm | 
| Type | Centre Rod Assembly | 
| Function | Centre Rod Assembly | 
| Extra Description | ProKit | 
Important compatibility info
| Placement on Vehicle | Front, Rear | 
| Material | Rubber | 
| Outer diameter | 74 mm | 
| Inner diameter | 48 mm | 
| Function | Mounting, stabiliser bar | 
| Length | 57 mm | 
| Type | Mounting, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Mechanical | 
| Valve type | Overflow Valve | 
| Opening Pressure | 1.8 bar | 
| Function | Valve, fuel supply system | 
| Type | Valve, fuel supply system | 
| External Thread Size | M14 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal | 
| Placement on Vehicle | Rear Axle, Front Axle | 
| Function | Bushing, leaf spring | 
| Type | Bushing, leaf spring | 
| Inner diameter | 16.5 mm | 
| Thickness | 40 mm | 
| Outer diameter | 46 mm. 65 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover | 
| Type | Gasket, cylinder head cover | 
| for OE number | 0 0484 5138 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal | 
| Placement on Vehicle | Front | 
| Length | 63.5 mm. 80 mm | 
| Outer diameter | 60 mm | 
| Inner diameter | 16.5 mm | 
| Function | Bush, driver cab suspension | 
| Type | Bush, driver cab suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















