Important compatibility info
| Width | 13 mm | 
| Material | PTFE (polytetrafluoroethylene) | 
| Outer diameter | 175 mm | 
| Inner diameter | 145 mm | 
| Function | Shaft Seal, crankshaft | 
| Placement on Vehicle | transmission sided | 
| Type | Shaft Seal, crankshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Running surface internal diameter | 172 mm | 
| External diameter, clutch pressure plate | 365 mm | 
| Hub fastening hole diameter | 12.0 mm | 
| Hub internal diameter | 78 mm | 
| Pitch circle diameter, clutch pressure plate | 345 mm | 
| Number of hub fastening holes | 8 | 
| Function | Flywheel | 
| Pitch circle diameter, hub | 105 mm | 
| Hub external diameter | 130 mm | 
| Number of clutch pressure plate fastening holes | 8 | 
| Number of Teeth | 125 | 
| Additional Information | with starter motor sprocket | 
| Type | Flywheel | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 75 mm | 
| Outer diameter | 39.8 mm. 46 mm | 
| Spanner Size | 19 | 
| Thread Length | 12 mm | 
| Number of Connectors / Ports | 2 | 
| Control Range | 0,25+0,15 bar | 
| Function | Sensor, oil pressure | 
| Switch point to | 5 bar | 
| for OE number | 001 542 56 17 | 
| External Thread Size | M14 x 1,5 | 
| Type | Sensor, oil pressure | 
| Switch | with alarm switch | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front and Rear | 
| Outer diameter | 55 mm | 
| External Thread Size | M8 x 1,25 | 
| Function | Rubber Buffer, driver cab | 
| Type | Rubber Buffer, driver cab | 
| Height | 45 mm | 
| Thread Length | 20 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Centre Rod Assembly | 
| Extra Description | ProKit | 
| Type | Centre Rod Assembly | 
| Pipe Diameter | 52 mm | 
| Cone Size | 30 mm | 
| Driver Position | for right-hand drive vehicles | 
| Rod/Strut | Push Rod | 
| Outer diameter | 52 mm | 
| Length | 1059 mm | 
| Internal Thread Size | M30 x 1,5 RHT | 
| External Thread Size | M24 x 1,5 | 
| Additional Information | with castellated nut and split pins | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Outer diameter | 280 mm | 
| Thickness | 142 mm | 
| Brake Disc Thickness | 16 mm | 
| Brake Disc Type | Solid | 
| Minimum thickness | 14.5 mm | 
| Bolt Hole Circle Diameter | 170 mm | 
| Surface | Coated | 
| Function | Brake Disc | 
| Additional Information 2 | with wheel studs | 
| External Thread Size | M18 x 1,5 | 
| Type | Brake Disc | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with wheel studs | 
| Placement on Vehicle | Front Axle | 
| Outer diameter | 290 mm | 
| Bolt Hole Circle Diameter | 205 mm | 
| Brake Disc Thickness | 25.2 mm | 
| Brake Disc Type | Internally Vented | 
| Minimum thickness | 23 mm | 
| Thickness | 160 mm | 
| Function | Brake Disc | 
| Surface | Coated | 
| External Thread Size | M18 x 1,5 | 
| Type | Brake Disc | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 6 -Hole | 
| Bolt Hole Circle Diameter | 170 mm | 
| Additional Information 2 | with wheel studs | 
| Placement on Vehicle | Front Axle | 
| Outer diameter | 290 mm | 
| Thickness | 84 mm | 
| Brake Disc Thickness | 22 mm | 
| Brake Disc Type | Solid | 
| Minimum thickness | 19 mm | 
| Centering Diameter | 125 mm | 
| Surface | Coated | 
| Function | Brake Disc | 
| External Thread Size | M18 x 1,5 | 
| Type | Brake Disc | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 290 mm | 
| Thickness | 84.5 mm | 
| Brake Disc Thickness | 22 mm | 
| Minimum thickness | 19 mm | 
| Bolt Hole Circle Diameter | 108 mm | 
| Centering Diameter | 84 mm | 
| Surface | Coated | 
| Function | Brake Disc | 
| Rim Hole Number | 8 -Hole | 
| Placement on Vehicle | Rear Axle | 
| Type | Brake Disc Rotor | 
| Rotor Style | Solid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 79 °C | 
| Type | Thermostat, coolant | 
| Function | Thermostat, coolant | 
| Additional Information | with gasket/seal | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | Coated | 
| Placement on Vehicle | Front Axle, Rear Axle | 
| Outer diameter | 304 mm | 
| Thickness | 128 mm | 
| Brake Disc Thickness | 30 mm | 
| Brake Disc Type | Internally Vented | 
| Number of Holes | 6 | 
| Minimum thickness | 28 mm | 
| Bolt Hole Circle Diameter | 205 mm | 
| Function | Brake Disc | 
| Type | Brake Disc | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle | 
| Outer diameter | 322 mm | 
| Thickness | 134 mm | 
| Brake Disc Thickness | 30 mm | 
| Brake Disc Type | Internally Vented | 
| Number of Holes | 8 | 
| Minimum thickness | 27.75 mm | 
| Bolt Hole Circle Diameter | 275 mm | 
| Surface | Coated | 
| Function | Brake Disc | 
| Type | Brake Disc | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Disc Thickness | 16 mm | 
| Minimum thickness | 13 mm | 
| Bolt Hole Circle Diameter | 118 mm | 
| Surface | Coated | 
| Placement on Vehicle | Rear Axle | 
| Outer diameter | 276 mm | 
| Thickness | 69.4 mm | 
| Function | Brake Disc | 
| Rim Hole Number | 5 -Hole | 
| Type | Brake Disc Rotor | 
| Rotor Style | Solid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 46 mm | 
| Function | Repair Kit, guide strut | 
| Outer diameter | 65 mm. 70 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Additional Information | with grease | 
| Type | Repair Kit, guide strut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Screw (35972)
- 1x Febi Ball Joint, axle strut (35986)
- 1x Febi Spacer Ring (35988)
- 1x Febi Lock Ring, steering knuckle (35990)
- 2x Febi Seal Ring (35991)
- 1x Febi Lock Ring, steering knuckle (35992)
- 1x Febi Fastening Clamp (35993)
- 1x Febi Spacer Disc, connector rod (35994)
- 1x Febi Circlip (35995)
Important compatibility info
| Length | 320 mm | 
| Height | 25 mm | 
| Width | 237 mm | 
| Filter type | Pollen Filter | 
| Function | Filter, cabin air | 
| Type | Filter, cabin air | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 428 mm | 
| Height | 24 mm | 
| Width | 170 mm | 
| Filter type | Pollen Filter | 
| Function | Filter, cabin air | 
| Type | Filter, cabin air | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron | 
| Water pump impeller material | Grey Cast Iron | 
| Seal Material | Rubber | 
| Number of Wings | 7 | 
| Function | Water Pump, engine cooling | 
| Type | Water Pump, engine cooling | 
| Additional Information | with fastening/mounting material | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width 2 | 135 mm | 
| Function | Bush, parabolic spring | 
| Length | 230 mm. 210 mm | 
| Thickness | 152 mm | 
| Width 1 | 165 mm | 
| Type | Bush, parabolic spring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 120 mm | 
| Function | Bush, parabolic spring | 
| Width | 165 mm. 135 mm | 
| Length | 230 mm. 210 mm | 
| Type | Bush, parabolic spring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 17498 | 
| Rotation Direction | Clockwise rotation | 
| Function | Brake Shaft, drum brake | 
| Placement on Vehicle | Front Axle Left | 
| Type | Brake Shaft, drum brake | 
| Length | 223 mm | 
| Outer diameter | 98 mm | 
| Number of Teeth | 26 | 
| Screw length below head | 175 mm | 
| Brake Shaft Cam | S-cam | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















