Important compatibility info
| Function | Repair Kit, brake camshaft | 
| Type | Repair Kit, brake camshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Washer (04957)
- 3x Febi Spacer, brake shaft (18171)
- 1x Febi Spacer, brake shaft (18188)
- 1x Febi Brake Shaft, drum brake (18213)
- 1x Febi Brake Shaft, drum brake (18212)
- 1x Febi Warning Contact, brake pad wear (09217)
- 2x Febi Seal, brake shaft (17931)
Important compatibility info
| Operating Mode | Electric | 
| Function | Adapter, oil pressure switch / Adapter, pressure switch / Adapter, stop light switch | 
| Type | Adapter, oil pressure switch / Adapter, pressure switch / Adapter, stop light switch | 
| Length | 115 mm. 148 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 850 mm | 
| Outer diameter | 42 mm | 
| Rod/Strut | Push Rod | 
| Pipe Diameter | 42 mm | 
| Driver Position | for right-hand drive vehicles | 
| Cone Size | 31.5 mm | 
| Function | Centre Rod Assembly | 
| Extra Description | ProKit | 
| External Thread Size | M24 x 1,5, M30 x 1,5 | 
| Type | Centre Rod Assembly | 
| Additional Information | with castellated nut and split pins | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5 | 
| Driver Position | for right-hand drive vehicles | 
| Length | 861 mm | 
| Cone Size | 28.6 mm | 
| Function | Centre Rod Assembly | 
| Pipe Diameter | 52 mm | 
| Rod/Strut | Push Rod | 
| Outer diameter | 52 mm | 
| Extra Description | ProKit | 
| Internal Thread Size | M30 x 1,5 | 
| Type | Centre Rod Assembly | 
| Additional Information | with castellated nut and split pins | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with crown nut | 
| Function | Tie Rod | 
| Extra Description | ProKit | 
| Type | Tie Rod | 
| Length | 1645 mm | 
| Placement on Vehicle | Front Axle | 
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT | 
| External Thread Size | M20 x 1,5 | 
| Pipe Diameter | 42 mm | 
| Cone Size | 28.6 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Steering Lock | 
| Number of Connectors / Ports | 4 | 
| Operating Mode | Electric | 
| Type | Steering Lock | 
| Lock System | with two keys, with lock barrel | 
| Additional Information 2 | with bolts/screws, with switch | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, kingpin | 
| Outer diameter | 28 mm. 35 mm | 
| Length | 178 mm | 
| Extra Description | ProKit | 
| Type | Repair Kit, kingpin | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, kingpin | 
| Length | 225 mm | 
| Outer diameter | 43 mm. 47 mm | 
| Extra Description | ProKit | 
| Type | Repair Kit, kingpin | 
| Additional Information 2 | with bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Kingpin (193374)
Important compatibility info
| Outer diameter | 40 mm. 55 mm | 
| Function | Repair Kit, kingpin | 
| Length | 223 mm | 
| Extra Description | ProKit | 
| Type | Repair Kit, kingpin | 
| Additional Information 2 | with rolling bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10557)
Important compatibility info
| Combi Switch Function | with indicator function, with cruise control, with light dimmer function | 
| Type | Steering Column Switch | 
| Function | Steering Column Switch | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 5 | 
| Control Type | Rotary Operation | 
| Type | Ignition Switch | 
| Function | Ignition Switch | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right | 
| Function | Wheel Bearing Kit | 
| Inner diameter | 68 mm | 
| Bearing Type | Tapered Roller Bearing | 
| Width | 115 mm | 
| Outer diameter | 127 mm | 
| Type | Wheel Bearing Kit | 
| Additional Information 2 | with seal ring, with crown nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (18417)
- 1x Febi Nut, kingpin (18203)
- 1x Febi Seal Ring, wheel hub (18471)
Important compatibility info
| Type | V-Belt | 
| Length | 1950 mm | 
| Function | V-Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Belt | 
| Length | 1625 mm | 
| Type | V-Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1925 mm | 
| Function | V-Belt | 
| Type | V-Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with indicator function, with light dimmer function | 
| Type | Steering Column Switch | 
| Function | Steering Column Switch | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric | 
| Function | Stop Light Switch | 
| Type | Stop Light Switch | 
| Housing Colour | black | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Track rollers material | Plastic | 
| Operating Mode | Automatic | 
| Housing material | Aluminium | 
| Function | Belt Tensioner, v-ribbed belt | 
| Outer diameter | 74 mm | 
| Width of castor bearing surface | 34 mm | 
| for OE number | 2 197 002 | 
| Type | Belt Tensioner, v-ribbed belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Aluminium | 
| Function | Belt Tensioner, v-ribbed belt | 
| Operating Mode | Automatic | 
| Number of Ribs | 7 | 
| Outer diameter | 74 mm | 
| Track rollers material | Plastic | 
| Material | Plastic | 
| Type | Belt Tensioner, v-ribbed belt | 
| Width of castor bearing surface | 34 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Track rollers material | Plastic | 
| Housing material | Aluminium | 
| Function | Belt Tensioner, v-ribbed belt | 
| Width of castor bearing surface | 32 mm | 
| Outer diameter | 74 mm | 
| Operating Mode | Automatic | 
| Type | Belt Tensioner, v-ribbed belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















