Important compatibility info
Length | 79 mm |
Material | Rubber |
Inner diameter 1 | 21 mm |
Inner diameter 2 | 79 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.34 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03183)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Additional Information | with seal rings |
Opening Temperature | 75 °C |
Type | Thermostat, oil cooling |
Function | Thermostat, oil cooling |
Weight | 0.063 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.354 kg |
Outer diameter | 48 mm |
Thickness | 45 mm |
Type | Bush, connecting rod |
Function | Bush, connecting rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 11 V |
Spanner Size | 12 |
Weight | 0.025 kg |
Fitting Depth | 22 mm |
External Thread Size | M10 x 1,25 |
Function | Glow Plug |
Type | Glow Plug |
Glow Plug Type | after-glow capable |
Length | 88.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 143 mm |
Weight | 1.986 kg |
Width | 143 mm |
Parameter | 6PK |
Type | Belt Pulley, crankshaft |
Inner diameter | 30 mm |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Accessory Kit, disc brake pad |
Brake System | ATE |
Placement on Vehicle | Rear Axle |
Weight | 0.082 kg |
Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Brake System | ATE |
Weight | 0.065 kg |
Type | Accessory Kit, disc brake pad |
Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Valve type | for inlet valves |
Function | Valve Guide |
Weight | 0.03 kg |
Type | Valve Guide |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.232 kg |
Colour | Black |
Material | Plastic |
Placement on Vehicle | Left |
Paired article numbers | 15434 |
Function | Exterior Door Handle |
Type | Exterior Door Handle |
Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.638 kg |
Placement on Vehicle | Front Axle |
Length | 137 mm |
Width | 57.4 mm |
Brake System | Bosch |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Manufacturer | CITROEN PEUGEOT |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.850 kg |
Placement on Vehicle | Rear Axle |
Length | 93.5 mm |
Width | 46.8 mm |
Brake System | Nissin |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.7 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.044 kg |
Additional Information | with fastening/mounting material |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 175519 |
Steering | with tie rod end |
Function | Tie Rod |
Type | Tie Rod |
External Thread Size | M10 x 1,25, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (107365)
- 1x Febi Inner Tie Rod (108794)
Important compatibility info
Material | Rubber, Rubber with fabric lining |
Inner diameter | 25 mm |
Paired article numbers | 17679 |
Weight | 0.059 kg |
Placement on Vehicle | Front Axle, inner |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with grease |
Inner diameter 2 | 62 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 210 mm |
Material | Rubber |
Inner diameter 1 | 13 mm |
Function | Bellow Kit, steering |
Weight | 0.1410 kg |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (23841)
- 1x Febi Clamping Clip (38764)
- 1x Febi Fastening Clamp (06584)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Weight | 0.400 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 53 mm. 32 mm |
Thickness | 80 mm |
Inner diameter | 15 mm |
Function | Mounting, control/trailing arm |
Weight | 0.247 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 20 mm |
Number of Teeth | 130 |
Surface | Coated |
Belts | with rounded tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Weight | 0.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.094 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 70 mm |
Thickness | 90 mm |
Inner diameter | 12 mm |
Function | Bush Set, axle beam |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (31694)
- 2x Febi Bolt, axle beam mounting (26142)
- 2x Febi Nut (14392)
Important compatibility info
Weight | 0.01 kg |
Colour | green |
Number of Connectors / Ports | 2 |
Function | Sensor, coolant temperature |
Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 21483 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without bearing, without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.2 kg |
Rotor Style | Solid |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 274 mm |
Thickness | 82.3 mm |
Brake Disc Thickness | 10.9 mm |
Minimum thickness | 9.5 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 52.3 mm |
Surface | Oiled |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 503 mm |
Function | Brake Hose |
Type | Brake Hose |
Weight | 0.09 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.202 kg |
Length | 204 mm |
Height | 40 mm |
Width | 178 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 6.80 kg |
Minimum thickness | 19.4 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Brake Disc Thickness | 22 mm |
Thickness | 58.5 mm |
Outer diameter | 300 mm |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without seal ring |
Weight | 0.15 kg |
Outer diameter | 60 mm |
Function | Thermostat, coolant |
Opening Temperature | 82 °C |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal, Plastic |
Outer diameter | 111 mm |
Thickness | 27 mm |
Inner diameter | 68 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Weight | 0.26 kg |
Type | Rolling Bearing, suspension strut support mount |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Clutch Release Bearing |
Weight | 0.170 kg |
Type | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.210 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Wheel Side |
Length | 59 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 53 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29821)
- 1x Febi Clamping Clip (100698)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Weight | 3.3 kg |
Operating Mode | Manual |
Number of Connectors / Ports | 2 |
Type | Tilt Pump, driver cab |
Function | Tilt Pump, driver cab |
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 622 mm |
Housing Diameter | 19 mm |
Eject Force | 590 N |
Stroke | 196 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 394.5 mm |
Placement on Vehicle | both sides |
Type | Gas Spring, boot/cargo area |
Weight | 0.377 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.62 kg |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.121 kg |
Placement on Vehicle | both sides |
Length | 240 mm |
Eject Force | 380 N |
Stroke | 70 mm |
Housing length | 142.5 mm |
Mounting points diameter | 16.5 mm |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.23 kg |
Length | 2255 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Resistance | 233 Ohm |
Weight | 0.025 kg |
Length | 26 mm |
Width | 28 mm |
Thickness | 28 mm |
Voltage | 24 V |
Number of Connectors / Ports | 5 |
Current Strength | 22 A. 10 A |
Function | Hazard Warning Light Relay |
Type | Hazard Warning Light Relay |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 58 |
Function | Chain, oil pump drive |
Additional Information 2 | Requires special tools for mounting |
Timing Chain Size | G53RING-1, G53RING-2 |
Type | Chain, oil pump drive |
Chain Type | Simplex, Closed chain |
Weight | 0.172 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 5.76 kg |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.6 mm |
Surface | Coated |
Function | Brake Disc |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 258 mm |
Thickness | 43.9 mm |
Brake Disc Thickness | 23 mm |
Minimum thickness | 21 mm |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 72 mm |
Width of castor bearing surface | 38.5 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.392 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 60 mm |
Material | Plastic |
Width of castor bearing surface | 26 mm |
Weight | 0.115 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber, Rubber with fabric lining |
Inner diameter | 19.5 mm |
Weight | 0.040 kg |
Placement on Vehicle | Front Axle |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 87 mm |
Inner diameter | 16 mm |
Function | Rubber Buffer, suspension |
Material | PU (Polyurethane) |
Weight | 0.068 kg |
Outer diameter | 62 mm |
Placement on Vehicle | Front Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 48 mm |
Outer diameter | 62 mm |
Inner diameter | 30 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | with retaining ring |
Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.089 kg |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Additional Information | with nuts, with fastening/mounting material |
Paired article numbers | 40366 |
Material | Cast Steel |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30255)
- 1x Febi Nut (06877)
- 1x Febi Camber Correction Screw (21560)
- 1x Febi Nut (21557)
Important compatibility info
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Weight | 1.700 kg |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.06 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 844 mm |
Function | V-Ribbed Belt |
DIN / ISO | 7867 |
Number of Ribs | 4 |
Chemical Properties | Elastic |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.772 kg |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Inner diameter | 33 mm |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Outer diameter | 93 mm |
Width | 41 mm |
Bearing Type | Angular Ball Bearing |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter 1 | 68 mm |
Outer diameter 2 | 143 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.04 kg |
Material | Rubber |
Inner diameter | 25 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.63 kg |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 16 mm |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without integrated washer fluid jet |
Placement on Vehicle | Right |
Paired article numbers | 176683 |
Weight | 0.089 kg |
Type | Repair Kit, windscreen washer-fluid jet |
Function | Repair Kit, windscreen washer-fluid jet |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Weight | 0.140 kg |
Paired article numbers | 183778 |
Length | 335 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023