Important compatibility info
Axle Joint Thread Type | with right-hand thread, with external thread |
Axle Joint Length | 259 mm |
Thread Measurement 2 | M14X1.5 |
Length | 259 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Important compatibility info
Function | Tie Rod End |
Placement on Vehicle | Front Axle Right |
Type | Tie Rod End |
Paired article numbers | FTR5600 |
Important compatibility info
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5867 |
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 45.5 mm |
Outer diameter 1 | 74 mm |
Inner diameter 1 | 37 mm |
Placement on Vehicle | Rear Axle |
Type | Wheel Bearing Kit |
Bearing Code | Gen 1 |
Important compatibility info
Placement on Vehicle | Front Axle |
Replaces | BWK1171 |
Bearing Code | Gen 2 |
Additional Information 2 | with integrated ABS sensor |
Function | Wheel Bearing Kit |
Outer diameter 2 | 82 mm |
Width 1 | 86.8 mm |
Outer diameter 1 | 136.5 mm |
Type | Wheel Bearing Kit |
Important compatibility info
Function | Wheel Bearing Kit |
Outer diameter 1 | 140 mm |
Bearing Code | Gen 3 |
Width 1 | 111 mm |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Replaces | BWK371 |
Bearing Code | Gen 2 |
Inner diameter 1 | 30 mm |
Outer diameter 1 | 117 mm |
Width 1 | 61 mm |
Tightening Torque | 280 Nm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Placement on Vehicle | Rear Axle |
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 32 mm |
Outer diameter 1 | 130 mm |
Width 1 | 59 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Code | Gen 2 |
Important compatibility info
Water Pump Pulley Diameter | 90 mm |
Impeller Diameter | 100 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Port / Connector type | 2 PIN |
Type | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Connector Shape | D Shape |
Important compatibility info
Type | Oil sump |
Material | Steel |
Function | Oil sump |
Important compatibility info
Replaced by | BBP2593 |
Placement on Vehicle | Front Axle |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Number of Springs | 2 |
Number of pads | 4 |
Thickness/Strength 2 | 18.4 mm |
Thickness/Strength 1 | 19.1 mm |
Number of wear indicators | 2 Per Axle |
Width 1 | 193.2 mm |
Height 1 | 64.7 mm |
Wear Warning Contact | with acoustic wear warning |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 1024 mm |
External Teeth, Wheel Side | 31 |
External Teeth, Diff.Side | 31 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Important compatibility info
Length | 257 mm |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Function | Brake Disc |
Centering Diameter | 96.3 mm |
Minimum thickness | 26 mm |
Outer diameter | 299 mm |
Number of Holes | 6 |
Brake Disc Thickness | 28 mm |
Height | 56.5 mm |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Rotor Style | Vented |
Quantity Unit | Set |
Surface | Coated |
Number of mounting bores | 2 |
Important compatibility info
Additional Information 2 | with sensor |
Function | Thermostat, coolant |
Opening Temperature | 103 °C |
Housing material | Plastic |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Width | 46 mm |
Inner diameter | 14 mm |
Type | Mounting, engine |
Height | 115 mm |
Length | 152 mm |
Placement on Vehicle | Rear |
Important compatibility info
Placement on Vehicle | Rear Axle |
Rotor Style | Solid |
Outer diameter | 269 mm |
Brake Disc Thickness | 9 mm |
Height | 55.7 mm |
Number of Holes | 5 |
Minimum thickness | 7 mm |
Centering Diameter | 55 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Surface | Coated |
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 302 mm |
Brake Disc Thickness | 10 mm |
Height | 59 mm |
Minimum thickness | 8.5 mm |
Centering Diameter | 80 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |
Important compatibility info
Additional Information 2 | without clamp holder |
Length | 385 mm |
Function | Brake Hose |
Thread Measurement 1 | M10x1 |
Thread Measurement 2 | M10x1 |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Placement on Vehicle | Rear Axle |
Type | Brake Pad Set, disc brake |
Width 1 | 123 mm |
Thickness/Strength 1 | 15.4 mm |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Height 1 | 51.9 mm |
Brake System | Ate - Teves |
Wear Warning Contact | not prepared for wear warning indicator |
Important compatibility info
Additional Information 2 | without banjo bolt |
Length | 695 mm |
Function | Brake Hose |
Additional Information | with banjo fitting |
Thread Type | with internal thread |
Thread Size | M10x1 |
Type | Brake Hose |
Important compatibility info
Length | 279 mm |
Function | Brake Hose |
Additional Information 2 | without banjo bolt |
Placement on Vehicle | Rear Axle Left |
Type | Brake Hose |
Additional Information | with banjo fitting |
Thread Type | with internal thread |
Important compatibility info
Length | 368 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Placement on Vehicle | Front Axle |
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Placement on Vehicle | Rear Axle |
Brake System | Kelsey Hayes |
Thickness/Strength 1 | 16.2 mm |
Number of Springs | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 39.9 mm |
Width 1 | 134.2 mm |
Important compatibility info
Wear Warning Contact | prepared for wear warning indicator |
Brake System | Ate - Teves |
Thickness/Strength 1 | 18.8 mm |
Number of pads | 4 |
Number of Springs | 2 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 59.4 mm |
Height 2 | 59.7 mm |
Width 1 | 140.3 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Brake System | Lucas - Girling |
Number of wear indicators | 2 Per Axle |
Thickness/Strength 1 | 17.1 mm |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 49.2 mm |
Width 1 | 131.5 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Thickness/Strength 1 | 18.9 mm |
Placement on Vehicle | Front Axle |
Brake System | Ate - Teves |
Number of wear indicators | 2 Per Axle |
Number of pads | 4 |
Number of Springs | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 64.6 mm |
Width 1 | 193.3 mm |
Width 2 | 194.6 mm |
Important compatibility info
Width | 40 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Diameter | 31.8 mm |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Important compatibility info
Diameter | 20.6 mm |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Placement on Vehicle | Rear Axle Right |
Important compatibility info
Function | Slave Cylinder, clutch |
Inner diameter | 22.2 mm |
Material | Plastic |
Type | Slave Cylinder, clutch |
Important compatibility info
Plug Type ID | L,DFM |
Voltage | 12 V |
Number of Ribs | 6 |
Alternator Charge Current | 90 A |
Belt Pulley Diameter | 56 mm |
Connector Shape | D Shape |
Function | Alternator |
Type | Alternator |
Number of mounting bores | 4 |
Manufacturer Restriction | Bosch |
Important compatibility info
Driven Units | Camshaft |
Number of Teeth | 141 |
Function | Water Pump & Timing Belt Kit |
Width | 30 mm |
Number of belts | 1 |
Type | Water Pump & Timing Belt Kit |
Important compatibility info
Surface | Coated |
Outer diameter | 310 mm |
Function | Brake Disc |
Centering Diameter | 110 mm |
Minimum thickness | 39.0 mm |
Brake Disc Thickness | 42 mm |
Height | 56 mm |
Number of Holes | 12 |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Quantity | 1 |
Important compatibility info
Type | Bellow Kit, drive shaft |
Material | Thermoplast |
Length | 139 mm |
Function | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Important compatibility info
Length | 447 mm |
Function | Brake Hose |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Function | Brake Hose |
Length | 453 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Important compatibility info
Bore Diameter 2 | 20 mm |
Additional Information 2 | without bolts/screws |
Mounting Type | Bolted |
Number of Rivet Holes | 3 |
Thread Measurement 1 | M16x1.5 |
Bore Diameter | 12.5 mm |
Function | Ball Joint |
Number of mounting bores | 3 |
Type | Ball Joint |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Lower |
Bore Diameter 1 | 17.1 mm |
Important compatibility info
Number of Teeth | 20 |
Hub Profile | 22.3 x 20 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Important compatibility info
Hub Profile | 25.6 x 23 |
Outer diameter | 203 mm |
Function | Clutch Kit |
Number of Teeth | 24 |
Type | Clutch Kit |
Important compatibility info
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Inlet Diameter | 12.2 mm |
Clutch Equipment | With purge pipe |
Number of Teeth | 26 |
Important compatibility info
Inner Brake Drum Diameter | 210 mm |
Width | 46 mm |
Function | Brake Shoe Set, parking brake |
Type | Brake Shoe Set, parking brake |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Length | 572 mm |
Steering arm type | Trailing Arm |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6103 |
Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5415)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6367)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6368)
Important compatibility info
Material | Grey Cast Iron |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6368 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6493)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6495)
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6958 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7486 |
Placement on Vehicle | Rear Axle Right, Upper, Rear |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023