Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Pipe Diameter | 50 mm |
Length | 539 mm |
Steering arm type | Trailing Arm |
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6122 |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Version | With fittings(ex.KP) |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6707 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6137)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6989)
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 120 mm |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Type | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
Inner diameter 2 | 108 mm |
Inner diameter 1 | 24 mm |
Important compatibility info
Height | 82 mm |
Outer diameter | 64 mm |
Filter type | Filter Insert |
Inner diameter 2 | 26 mm |
Type | Oil Filter |
Function | Oil Filter |
Important compatibility info
Material | Cast Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Length | 232 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6789 |
Placement on Vehicle | Rear Axle Left |
Important compatibility info
Thread Measurement 2 | M12X1.25 |
Thread Size | M12X1.25 |
Length | 318 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Thread Measurement 2 | M12X1.75 |
Thread Size | M12X1.75 |
Length | 225 mm |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Surface | Coated |
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Centering Diameter | 72 mm |
Minimum thickness | 32.0 mm |
Outer diameter | 380 mm |
Brake Disc Thickness | 34 mm |
Height | 54.5 mm |
Number of Holes | 5 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Quantity | 1 |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Placement on Vehicle | Rear Axle |
Type | Accessory Kit, disc brake pad |
Important compatibility info
Height | 167 mm |
Outer diameter | 166 mm |
Inner diameter | 102 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Shape/Form | round |
Important compatibility info
Additional Information | with gaskets/seals |
Additional Information 2 | with sensor |
Opening Temperature | 88 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Housing material | Aluminium |
Function | Thermostat, coolant |
Important compatibility info
Paired article numbers | BFC1014 |
Length | 240 mm |
Height | 34 mm |
Width | 209 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Important compatibility info
Outer diameter | 71 mm |
Height | 51 mm |
Filter type | Filter Insert |
Manufacturer Restriction | BOSCH |
Function | Fuel filter |
Type | Fuel filter |
Inner diameter | 20 mm |
Inner diameter 2 | 20 mm |
Important compatibility info
Height | 56 mm |
Outer diameter | 60 mm |
Inner diameter | 28 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Type | Oil Filter |
Important compatibility info
Length 1 | 2085 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Type | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle Left, Wheel Side |
Function | Joint Kit, drive shaft |
Important compatibility info
Length | 675 mm |
Type | Drive Shaft |
External Teeth, Diff.Side | 26 |
External Teeth, Wheel Side | 27 |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1278)
Important compatibility info
External Teeth, Diff.Side | 27 |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
External Teeth, Wheel Side | 26 |
Length | 537 mm |
Important compatibility info
Placement on Vehicle | Left Rear |
Length 1 | 1616 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length 1 | 1255 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Length 1 | 1175 mm |
Function | Cable Pull, manual transmission |
Length 4 | 900 mm |
Length 3 | 1275 mm |
Length 2 | 910 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with clamps |
Inner diameter 2 | 54 mm |
Function | Bellow Kit, steering |
Length | 206 mm |
Inner diameter 1 | 12 mm |
Type | Bellow Kit, steering |
Material | Rubber |
Important compatibility info
Diameter | 63 mm |
Length | 53 mm |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6368 |
Important compatibility info
Thread Type | with internal thread |
Placement on Vehicle | Rear Axle Left |
Additional Information 2 | without banjo bolt |
Thread Measurement 1 | M10x1 |
Length | 341 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information | with banjo fitting |
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Front Axle |
Important compatibility info
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 1 | 52 mm |
Colour | Black |
Inner diameter 2 | 52 mm |
Type | Charge Air Hose |
Important compatibility info
Inner diameter 1 | 17.4 mm |
Material | NBR (nitrile butadiene rubber) |
Colour | Black |
Inner diameter 2 | 17.4 mm |
Function | Intake Hose, air filter |
Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1000S)
Important compatibility info
Cone Size | 28.6 mm |
Function | Tie Rod End |
Type | Tie Rod End |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M20X1.5 |
Thread Type | with right-hand thread |
Length | 145 mm |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Length | 200 mm |
Thread Measurement 1 | M12X1.0 |
Function | Inner Tie Rod |
Axle Joint Length | 200 mm |
Axle Joint Thread Type | with right-hand thread, with internal thread |
Type | Inner Tie Rod |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5339 |
Placement on Vehicle | Front Axle Right, outer |
Important compatibility info
Thread Type | with internal thread |
Function | Tie Rod End |
Thread Size | M16X1.5 |
Type | Tie Rod End |
Important compatibility info
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5883 |
Important compatibility info
Important compatibility info
Function | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Replaces | BWK1456 |
Thread Measurement 1 | M12x1.25 |
Important compatibility info
Bearing Code | Gen 3 |
Outer diameter 1 | 135 mm |
Width 1 | 150 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Bearing Code | Gen 2 |
Inner diameter 1 | 30 mm |
Outer diameter 1 | 120 mm |
Width 1 | 64 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Required quantity | 1 |
Length | 675 mm |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Replaced by | BWP2060 |
Important compatibility info
Water pump impeller material | Plastic |
Number of Wings | 16 |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Thread Size | M8 |
Height | 57.5 mm |
Replaces | BWP2315 |
Type | Water Pump, engine cooling |
Impeller Diameter | 68 mm |
Water Pump Pulley Diameter | 60 mm |
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Type | Auxiliary water pump (cooling water circuit) |
Port / Connector type | 3 PIN |
Connector Shape | Oval |
Delivery Quantity | 850 l/h |
Important compatibility info
Number of Teeth | 26 |
Function | Clutch Kit |
Type | Clutch Kit |
Additional Information | with central slave cylinder |
Important compatibility info
Function | Clutch Kit |
Type | Clutch Kit |
Number of mounting bores at central releaser | 3 |
Number of Teeth | 18 |
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7908 |
Steering arm type | Control Arm |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 633 mm |
External Teeth, Wheel Side | 27 |
External Teeth, Diff.Side | 28 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Rotor Style | Solid |
Number of Holes | 5 |
Height | 54.5 mm |
Outer diameter | 302 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Centering Diameter | 76 mm |
Quantity Unit | Set |
Function | Brake Disc |
Type | Brake Disc Rotor |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Replaces | BBD5486; BBD5591 |
Number of mounting bores | 1 |
Important compatibility info
Length 1 | 1430 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Front |
Length 2 | 517 mm |
Important compatibility info
Function | Filter, cabin air |
Width | 194 mm |
Height | 30 mm |
Length | 224 mm |
Type | Filter, cabin air |
Filter type | Particulate Filter |
Important compatibility info
Material | Plastic |
Type | Master Cylinder, clutch |
Inner diameter | 15.87 mm |
Function | Master Cylinder, clutch |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023