Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Port / Connector type | 3 PIN |
Type | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Connector Shape | Oval |
Replaces | BWP3071 |
Important compatibility info
Number of Teeth | 18 |
Hub Profile | 19.3 x 17 |
Outer diameter | 190 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 3 -part |
Replaces | HK2432 |
Important compatibility info
Additional Information 2 | without banjo bolt |
Thread Measurement 1 | M10x1 |
Thread Type | with internal thread |
Type | Brake Hose |
Additional Information | with banjo fitting |
Placement on Vehicle | Front Axle Right |
Length | 510 mm |
Function | Brake Hose |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7912 |
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 615 mm |
External Teeth, Wheel Side | 30 |
External Teeth, Diff.Side | 25 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Length 2 | 1628 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Length 1 | 1888 mm |
Placement on Vehicle | Right Rear |
Important compatibility info
Function | Fuel filter |
Inlet Diameter | 8 mm |
Outer diameter | 55 mm |
Height | 268 mm |
Type | Fuel filter |
Filter type | In-Line Filter |
Important compatibility info
Inner diameter | 15.87 mm |
Material | Aluminium |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Important compatibility info
Function | Brake Hose |
Length | 150 mm |
Type | Brake Hose |
Placement on Vehicle | Rear Axle, Left, outer |
Additional Information | with banjo fitting |
Thread Type | with external thread |
Additional Information 2 | without banjo bolt |
Important compatibility info
Height | 60 mm |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Vented |
Quantity | 1 |
Centering Diameter | 70 mm |
Minimum thickness | 26.4 mm |
Number of Holes | 9 |
Brake Disc Thickness | 28 mm |
Outer diameter | 365 mm |
Placement on Vehicle | Rear Axle |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Length | 329 mm |
Material | Cast Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | FCA8059 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Outer diameter | 260 mm |
Function | Brake Disc |
Centering Diameter | 52.3 mm |
Minimum thickness | 7.0 mm |
Additional Information 2 | with groove, with ABS sensor ring, with wheel bearing |
Height | 86.2 mm |
Number of Holes | 5 |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Brake Disc Thickness | 8 mm |
Quantity | 1 |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Important compatibility info
Length | 673 mm |
Internal Teeth, wheel side | 42 |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Surface | Coated |
Number of Holes | 5 |
Outer diameter | 260 mm |
Brake Disc Thickness | 9 mm |
Height | 31 mm |
Rotor Style | Solid |
Minimum thickness | 8 mm |
Centering Diameter | 61 mm |
Function | Brake Disc |
Quantity Unit | Set |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Number of mounting bores | 4 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 330 mm |
Brake Disc Thickness | 28 mm |
Height | 73.7 mm |
Minimum thickness | 26 mm |
Centering Diameter | 85 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 2 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 291 mm |
Brake Disc Thickness | 28.1 mm |
Height | 38.3 mm |
Minimum thickness | 26 mm |
Centering Diameter | 80 mm |
Function | Brake Disc |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Height | 170 mm |
Diameter | 140 mm |
Function | Air Filter |
Inner diameter | 76 mm |
Filter type | Filter Insert |
Type | Air Filter |
Shape/Form | round |
Important compatibility info
Thread Measurement 1 | M10x1 |
Thread Measurement 2 | M10x1 |
Length | 520 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Type | with internal thread, with external thread |
Important compatibility info
Length | 322 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Rear Axle Right |
Thread Type | with internal thread |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Brake System | Akebono |
Number of wear indicators | 2 Per Axle |
Thickness/Strength 1 | 16.3 mm |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 47.9 mm |
Width 1 | 108.5 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Placement on Vehicle | Front Axle |
Brake System | Ate - Teves |
Thickness/Strength 1 | 18 mm |
Number of Springs | 2 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 52.5 mm |
Width 1 | 151.2 mm |
Width 2 | 151.4 mm |
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Brake System | Ate - Teves |
Thickness/Strength 1 | 17.7 mm |
Number of pads | 4 |
Number of Springs | 2 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 70.8 mm |
Height 2 | 68.5 mm |
Width 1 | 155.3 mm |
Width 2 | 156.4 mm |
Placement on Vehicle | Front Axle |
Replaced by | BBP1731 |
Important compatibility info
Wear Warning Contact | incl. wear warning contact |
Width 1 | 116 mm |
Thickness/Strength 1 | 17.2 mm |
Brake System | TRW |
Warning Contact Length | 305 mm |
Number of pads | 4 |
Number of threaded bolts | 2 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 60.2 mm |
Height 2 | 58.5 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Inner Brake Drum Diameter | 270 mm |
Width | 53 mm |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Diameter | 19.1 mm |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Number of mounting bores | 3 |
Type | Alternator |
Function | Alternator |
Alternator Charge Current | 80 A |
Belt Pulley Diameter | 55 mm |
Plug Type ID | S,IG,B+,L,M/DFM |
Number of Ribs | 6 |
Voltage | 12 V |
Replaces | BBA2499 |
Important compatibility info
Function | Brake Pad Set, disc brake |
Number of pads | 4 |
Wear Warning Contact | prepared for wear warning indicator |
Thickness/Strength 1 | 17.4 mm |
Brake System | Mando |
Type | Brake Pad Set, disc brake |
Height 1 | 57 mm |
Width 1 | 132.8 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Important compatibility info
Surface | Coated |
Outer diameter | 280 mm |
Number of Holes | 5 |
Brake Disc Thickness | 25 mm |
Height | 47.6 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 63.9 mm |
Minimum thickness | 23 mm |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Replaced by | BBD4538 |
Number of mounting bores | 4 |
Important compatibility info
Outer diameter | 360 mm |
Function | Brake Disc |
Centering Diameter | 79 mm |
Minimum thickness | 27.0 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Brake Disc Thickness | 30 mm |
Height | 62 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Quantity | 1 |
Number of mounting bores | 2 |
Important compatibility info
Replaces | BBH8008 |
Function | Brake Hose |
Length | 640 mm |
Placement on Vehicle | Front Axle Left |
Type | Brake Hose |
Additional Information | with banjo fitting |
Thread Type | with internal thread |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Mounting Bolt Thread Size | M10x1.5 |
Important compatibility info
Mounting Type | Pressed |
Version | Fitting Kit |
Thread Measurement 1 | M12x1.5 |
Bore Diameter | 39.8 mm |
Function | Ball Joint |
Bore Diameter 1 | 14.5 mm |
Bore Diameter 2 | 18 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Important compatibility info
Number of Teeth | 21 |
Function | Clutch Kit |
Hub Profile | 29.7 x 25.5 |
Outer diameter | 239 mm |
Number of Parts | 3 -part |
Type | Clutch Kit |
Important compatibility info
Function | Accessory Kit, brake shoes |
Placement on Vehicle | Rear Axle |
Type | Accessory Kit, brake shoes |
Important compatibility info
Wear Warning Contact | prepared for wear warning indicator |
Brake System | Brembo |
Thickness/Strength 1 | 15.1 mm |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 77.4 mm |
Width 1 | 131.8 mm |
Important compatibility info
Width | 57 mm |
Function | Brake Shoe Set, parking brake |
Type | Brake Shoe Set, parking brake |
Inner Brake Drum Diameter | 254 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Version | With fittings(ex.KP) |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5820 |
Placement on Vehicle | Front Axle Left, Upper, Front |
Additional Information
- 1x Borg & Beck Fastening Bolt, control arm (BSK8038)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6121)
Important compatibility info
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6123 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6708 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6873)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7404)
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6978 |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 699 mm |
External Teeth, Wheel Side | 28 |
Internal Teeth, wheel side | 36 |
External Teeth, Diff.Side | 37 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Inner diameter | 15.87 mm |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Important compatibility info
Function | Repair Kit, stabiliser bush |
Type | Repair Kit, stabiliser bush |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6788HD |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Measurement 2 | M12X1.5 |
Thread Size | M12X1.5 |
Length | 248 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL7077 |
Important compatibility info
Thread Measurement 2 | M12X1.25 |
Thread Size | M12X1.25 |
Length | 71 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Rear Axle Right |
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Front |
Important compatibility info
Length | 97 mm |
Height | 60 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Width | 42 mm |
Inner diameter | 12 mm |
Type | Mounting, engine |
Placement on Vehicle | Lower, Front |
Important compatibility info
Length | 226 mm |
Width | 212 mm |
Function | Air Filter |
Type | Air Filter |
Height | 68 mm |
Filter type | Filter Insert |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023