Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Air Dryer, compressed-air system |
| Function | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with integrated oil separator, with dryer |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.31
Important compatibility info
| Length | 60 mm |
| Outer diameter | 5.2 mm |
| Spanner Size | 27 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| External Thread Size | M16 x 1,5 |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.08
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 16 |
| Rated Power | 21 W |
| Function | Flasher Unit |
| Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.15
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 790 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.50
Important compatibility info
| Inner diameter | 15 mm |
| Outer diameter | 55 mm |
| Length | 75 mm |
| Type | Repair Kit, steering idler arm |
| Mounting points diameter | 14 mm |
| Additional Information | with counter nut |
| Function | Repair Kit, steering idler arm |
| Internal Thread Size | M6 x 1 |
| External Thread Size | M30 x 3,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.35
Important compatibility info
| Outer diameter | 150 mm |
| Thickness | 38 mm |
| Number of Ribs | 3 |
| Parameter | 4PK |
| Function | Belt Pulley, crankshaft |
| Additional Information | with pulse generator wheel |
| Type | Belt Pulley, crankshaft |
| for OE number | 55202554 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.23
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 271 mm |
| Width | 180 mm |
| Thickness | 227 mm |
| Thread Length | 56 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M16 x 2 |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.15
Important compatibility info
| Thickness | 56 mm |
| Number of Ribs | 8 |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.88
Important compatibility info
| Inner diameter | 8.3 mm |
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 4 |
| Cable Length | 280 mm |
| Valve type | Shut-Off Valve |
| Function | EGR valve, exhaust control |
| External Thread Size | M8 x 1,25 |
| Type | EGR valve, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.75
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 166 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| External Thread Size | M10 x 1,5 |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Inner diameter | 10 mm |
| Replaces | 42578 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.40
Important compatibility info
| Outer diameter | 70 mm |
| Thickness | 18 mm |
| Function | Sealing Cap, oil filler neck |
| Type | Sealing Cap, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.41
Important compatibility info
| Opening Pressure | 1.4 bar |
| Material | Plastic |
| for OE number | 970 501 01 65 |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 120 mm |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M24 x 1,5 RHT |
| Type | Tie Rod End |
| Thread Type | with right-hand thread |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.75
Important compatibility info
| Voltage | 24 V |
| Spanner Size | 22 |
| Number of Connectors / Ports | 2 |
| Switch Point | 103 °C |
| Function | Sensor, coolant temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.05
Important compatibility info
| Placement on Vehicle | Upper Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
| Hose Length | 490.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 32, 15 |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
| for OE number | 09 20 007 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44446)
- 1x Febi Tie Rod End (41947)
- 1x Febi Bellow, steering (39602)
£28.59
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of grooves | 1 |
| Number of Wings | 11 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.89
Important compatibility info
| Chain Type | Duplex, Simplex, Closed chain |
| Number of Chain Links | 266. 68 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 948 105 169 10 S1 |
| Timing Chain Size | D53HP |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (40769)
- 2x Febi Gear/Sprocket, camshaft (40774)
- 1x Febi Tensioner, timing chain (40776)
- 1x Febi Guide, timing chain (44252)
- 2x Febi Guide, timing chain (44254)
- 1x Febi Guide, timing chain (44253)
- 1x Febi Guide, timing chain (44267)
- 1x Febi Timing Chain (40777)
- 1x Febi Chain, oil pump drive (40786)
£556.68
Important compatibility info
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gaskets/seals, with lock nut |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.16
Important compatibility info
| Number of grooves | 10 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£169.02
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 996 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.17
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 164 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.17
Important compatibility info
| Function | Bush, kingpin |
| Extra Description | ProKit |
| Type | Bush, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (38490)
- 1x Febi Ball Joint (28356)
- 1x Febi Mounting, control/trailing arm (44400)
- 2x Febi Mounting, control/trailing arm (26933)
- 1x Febi Screw (44467)
- 1x Febi Screw (44469)
- 2x Febi Nut (44470)
£112.73
Important compatibility info
| Placement on Vehicle | Front |
| Material | FPM (fluoride rubber) |
| Function | Gasket, crankcase ventilation |
| Type | Gasket, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.61
Important compatibility info
| Number of Chain Links | 106 |
| Timing Chain Size | D67ZN |
| Chain Type | Duplex, with chain lock |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 102 050 10 11 S5 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09231)
- 1x Febi Tensioner, timing chain (01050)
£63.11
Important compatibility info
| Length | 300 mm |
| Width | 160 mm |
| Thickness | 195 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| for OE number | 50 01 833 357 |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.47
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 301 965 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 44519 |
| Outer Length | 470 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (33625)
- 1x Febi Nut, ball joint (23696)
£63.77
Important compatibility info
| Placement on Vehicle | Rear Axle Left, inner, Outer, Rear Axle Right |
| Width | 24 mm. 30 mm |
| Outer diameter | 38.3 mm |
| Inner diameter | 12.1 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.47
Important compatibility info
| Cone Size | 26 mm |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle |
| Length | 140 mm |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin, with threaded sleeve, with sleeve |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (43445)
£26.26
Important compatibility info
| Thread Type | with right-hand thread |
| Cone Size | 26 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 180 mm |
| Function | Tie Rod End |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with sleeve, with threaded sleeve, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (39389)
£26.63
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 145 mm |
| Thread Length | 107 mm |
| External Thread Size | M20 x 1,5 |
| Cone Size | 28.9 mm |
| Internal Thread Size | M30 x 1,5 |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Additional Information | with sleeve, with crown nut and split pin, with threaded sleeve |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (34103)
£27.07
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 120 mm |
| Outer diameter | 40 mm |
| Thread Type | with right-hand thread |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Additional Information | with sleeve, with lock nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (27481)
- 1x Febi Nut (26529)
£28.75
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane) |
| Thickness | 131 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.06
Important compatibility info
| Material | Plastic |
| Connector Shape | Round |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.76
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 21.5 mm |
| Thickness | 40 mm |
| Material | Rubber |
| Width | 45 mm |
| Length | 40 mm |
| Placement on Vehicle | Rear Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.67
Important compatibility info
| Outer diameter | 73.5 mm. 52.3 mm |
| Thickness | 26 mm |
| Inner diameter | 21 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.43
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44548 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39557)
- 1x Febi Ball Joint (36051)
£36.11
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.51
Important compatibility info
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 250 mm |
| Number of Connectors / Ports | 2 |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.82
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 340 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.37
Important compatibility info
| Length | 582 mm |
| Outer diameter | 40 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 404 mm |
| Mounting points diameter | 25 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£409.79
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 600 mm |
| Min. Length | 350 mm |
| Pipe Diameter | 63 mm. 54 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.63
Important compatibility info
| Function | Suspension, propshaft |
| Inner diameter | 30 mm |
| Outer diameter | 55 mm |
| Thickness | 106 mm |
| Width | 36 mm |
| Hole Spacing | 160 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (192918)
- 1x Febi Bearing, propshaft centre bearing (05362)
£36.06
Important compatibility info
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 30 mm |
| Width | 36 mm |
| Outer diameter | 55 mm |
| Thickness | 106 mm |
| Additional Information 2 | with ball bearing |
| Function | Suspension, propshaft |
| Hole Spacing | 145 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.04
Important compatibility info
| Length | 92 mm |
| Width | 38 mm |
| Thickness | 75 mm |
| Voltage | 28 V |
| Function | Alternator Regulator |
| Hole Spacing | 55 mm |
| Type | Alternator Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.15
Important compatibility info
| Length | 75 mm |
| Width | 80 mm |
| Thickness | 46 mm |
| Voltage | 28 V |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Hole Spacing | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 93 mm |
| Width | 79 mm |
| Material | Rubber/Metal |
| Thread Length | 33 mm |
| Thickness | 59 mm |
| Function | Rubber Buffer, suspension |
| External Thread Size | M12 x 1,75 |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.38
Important compatibility info
| Length | 400 mm |
| Outer diameter | 80 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 268 mm |
| Mounting points diameter | 25 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M14 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£450.92
Important compatibility info
| Length | 721 mm |
| Outer diameter | 48 mm |
| Number of Connectors / Ports | 3 |
| Stroke | 526 mm |
| Mounting points diameter | 28 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£355.28
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023