Important compatibility info
| Inner diameter | 398 mm |
| Number of Teeth | 143 |
| Width | 18 mm |
| Function | Ring Gear, flywheel |
| Outer diameter | 435 mm |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Pressure | 180 bar |
| Internal Thread Size | M26 x 1,5, M18 x 1,5 |
| Function | Hydraulic Pump, steering |
| Mounting points diameter | 11 mm |
| Type | Hydraulic Pump, steering |
| Hole Spacing | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 60 mm |
| Colour | Black |
| Width | 64 mm |
| Length | 92 mm |
| Shape/Form | rectangular |
| Extra Description | febi Plus |
| Function | Lift Point Pad, jack |
| Material | Plastic |
| Type | Lift Point Pad, jack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 3510 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 3400 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Number of Connectors / Ports | 2 |
| Length | 3725 mm |
| Additional Information | with bush |
| Resistance | 1150 Ohm |
| Cable Length | 3600 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Resistance | 1200 Ohm |
| Number of Connectors / Ports | 2 |
| Length | 3060 mm |
| Additional Information | with bush |
| Cable Length | 2880 mm |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with bush |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1025 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Cable Length | 920 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1960 mm |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
| Resistance | 1130 Ohm |
| Cable Length | 1920 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 193 mm |
| Material | Plastic |
| Additional Information 2 | with bolts/screws |
| Rod/Strut | Coupling Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (45353)
- 2x Febi Screw (36639)
- 2x Febi Nut (36641)
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Plastic |
| Placement on Vehicle | Front Axle |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Link/Coupling Rod, stabiliser bar (45353)
- 4x Febi Screw (36639)
- 4x Febi Nut (36641)
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 425 mm |
| Spanner Size | 15 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Number of Connectors / Ports | 6 |
| Type | Mass Air Flow Sensor |
| for OE number | 82 00 280 060 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 50 mm |
| Width | 25 mm |
| Material | Plastic |
| Inner diameter | 10 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, oil sump |
| Thickness | 18 mm |
| Material | NBR (nitrile butadiene rubber) |
| Width | 14 mm |
| Length | 1020 mm |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 103 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, pneumatic suspension level |
| Type | Sensor, pneumatic suspension level |
| Hole Spacing | 40 mm. 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 28.8 mm |
| Placement on Vehicle | Front Axle, from 1st to 2nd intermediate steering lever |
| Length | 2140 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hose Length | 610 mm |
| Function | Radiator Hose |
| Cooling Hose | from expansion tank to water pipe |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Placement on Vehicle | Lower Right |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Placement on Vehicle | Lower Right |
| Hose Length | 325 mm |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hose Length | 255 mm |
| Function | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Placement on Vehicle | Upper |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Hose Length | 215 mm |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















