Important compatibility info
| Rod/Strut | Coupling Rod |
| Inner diameter | 14.2 mm |
| Material | Steel |
| Outer diameter | 18.5 mm |
| Length | 199 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 260 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Diameter | 1 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 26.5 mm |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with crown nut and split pin |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17.7 mm |
| Mounting points diameter | 12 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Bolt / Nut Version | with plain washer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Paired article numbers | 48224 |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Paired article numbers | 48223 |
| Type | Ball Joint |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 365.5 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M18 x 1,5, M14 x 1,5 |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M15 x 1,5 |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, differential |
| Height | 8 mm |
| Placement on Vehicle | both sides |
| Inner diameter | 34.9 mm |
| Thickness | 15 mm |
| Outer diameter | 54.9 mm |
| Material | ACM (Polyacrylate) |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 501 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
| Outer diameter | 170 mm |
| Inner diameter | 127 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Units / Pulleys | Water Pump |
| Width | 10 mm |
| Number of Teeth | 87 |
| Belts | with rounded tooth profile |
| Type | Toothed Belt, power take-off |
| Function | Toothed Belt, power take-off |
| Surface | PTFE (Polytetrafluorethylene) coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 12 mm |
| Number of Teeth | 67 |
| Belts | with trapezoidal tooth profile |
| Function | Toothed Belt, power take-off |
| Type | Toothed Belt, power take-off |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Units / Pulleys | Water Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 60 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 158 |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Number of markings | 5 |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Width | 25 mm |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 50 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 813 mm |
| Thickness | 108 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Resistor, interior blower |
| Number of Connectors / Ports | 4 |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| for OE number | 46723713 |
| Material | Plastic |
| Colour | brown, green |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1528 mm. 820 mm |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear, Right Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1518 mm. 810 mm |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear, Right Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















