Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 2 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 2 |
Function | Starter |
Type | Starter |
Important compatibility info
Inner diameter 1 | 57 mm |
Inner diameter 2 | 55 mm |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Placement on Vehicle | Left, Lower, Front |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2005S)
Important compatibility info
Material | PE (Polyethylene) |
Function | Charge Air Hose |
Inner diameter 1 | 49 mm |
Type | Charge Air Hose |
Inner diameter 2 | 49 mm |
Colour | Black |
Important compatibility info
Material | Silicone |
Inner diameter 1 | 41 mm |
Colour | Black |
Inner diameter 2 | 47 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Important compatibility info
Thread Size | M8x1.25 |
Type | Ball Head, gearshift linkage |
Thread Type | with left-hand thread |
Length | 47 mm |
Function | Ball Head, gearshift linkage |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5108 |
Placement on Vehicle | Front Axle Left, outer |
Important compatibility info
Axle Joint Length | 416 mm |
Thread Measurement 2 | M16X1.5 |
Length | 416 mm |
Thread Measurement 1 | M18X1.5 |
Function | Inner Tie Rod |
Axle Joint Thread Type | with external thread |
Type | Inner Tie Rod |
Important compatibility info
Important compatibility info
Inner diameter 1 | 40 mm |
Outer diameter 1 | 80 mm |
Width 1 | 36 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Bearing Code | Gen 1 |
Important compatibility info
Required quantity | 2 |
Function | Warning Contact, brake pad wear |
Length 2 | 250 mm |
Length 1 | 470 mm |
Type | Warning Contact, brake pad wear |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Type | Water Pump, engine cooling |
Replaced by | BWP2015 |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 365 mm |
Paired article numbers | FCA8009 |
Steering arm type | Control Arm |
Material | Steel |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Length 2 | 1098 mm |
Length 3 | 1387 mm |
Length 4 | 1361 mm |
Length 1 | 1106 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Function | Cable Pull, manual transmission |
Length 1 | 892 mm |
Length 2 | 1262 mm |
Type | Cable Pull, manual transmission |
Number of Gears | for forwards gear |
Important compatibility info
Length 1 | 990 mm |
Type | Cable Pull, parking brake |
Placement on Vehicle | Front |
Function | Cable Pull, parking brake |
Length 2 | 740 mm |
Important compatibility info
Function | Brake Hose |
Length | 316 mm |
Additional Information | with banjo fitting |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Brake Hose |
Thread Type | with internal thread |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Mounting Bolt Thread Size | M12x1 |
Important compatibility info
Length | 423 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information 2 | with banjo bolt |
Additional Information | with banjo fitting |
Thread Type | with internal thread |
Placement on Vehicle | Front Axle Right |
Mounting Bolt Thread Size | M10x1 |
Thread Measurement 2 | M10x1 |
Important compatibility info
Function | Brake Hose |
Length | 450 mm |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Placement on Vehicle | Rear Axle Left |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Tie Rod End |
Thread Measurement 2 | M12x1.25 |
Thread Measurement 1 | M16x1.5 |
Type | Tie Rod End |
Paired article numbers | FTR6018 |
Important compatibility info
Height | 111 mm |
Diameter | 90 mm |
Filter type | Filter Insert |
Inner diameter 1 | 33 mm |
Type | Fuel filter |
Function | Fuel filter |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 288 mm |
Brake Disc Thickness | 20 mm |
Height | 32.5 mm |
Minimum thickness | 18 mm |
Centering Diameter | 64.5 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Important compatibility info
Replaced by | BBD4702 |
Rotor Style | Vented |
Brake Disc Thickness | 28 mm |
Outer diameter | 300 mm |
Number of Holes | 5 |
Height | 47.8 mm |
Minimum thickness | 26 mm |
Centering Diameter | 68.8 mm |
Function | Brake Disc |
Quantity Unit | Set |
Number of mounting bores | 2 |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Important compatibility info
Placement on Vehicle | Front Axle |
Brake Disc Thickness | 26 mm |
Outer diameter | 294 mm |
Minimum thickness | 24.5 mm |
Centering Diameter | 69 mm |
Number of Holes | 5 |
Height | 46 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Rotor Style | Vented |
Important compatibility info
Outer diameter | 278 mm |
Minimum thickness | 8 mm |
Centering Diameter | 62 mm |
Rotor Style | Solid |
Number of Holes | 5 |
Brake Disc Thickness | 9 mm |
Height | 43.1 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Surface | Coated |
Number of mounting bores | 2 |
Important compatibility info
Rotor Style | Vented |
Brake Disc Thickness | 28 mm |
Outer diameter | 302 mm |
Minimum thickness | 24.5 mm |
Centering Diameter | 90 mm |
Height | 70 mm |
Number of Holes | 5 |
Function | Brake Disc |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Thread Measurement 1 | M10x1 |
Length | 222 mm |
Function | Brake Hose |
Thread Measurement 2 | M10x1 |
Type | Brake Hose |
Thread Type | with internal thread |
Important compatibility info
Length | 345 mm |
Function | Brake Hose |
Thread Measurement 1 | M10x1 |
Thread Measurement 2 | M10x1 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Brake Hose |
Thread Type | with internal thread |
Important compatibility info
Length 1 | 1001 mm |
Length 2 | 720 mm |
Length 3 | 1052 mm |
Length 4 | 765 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Length | 247 mm |
Function | Brake Hose |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Important compatibility info
Length | 420 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 24 mm |
Important compatibility info
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17 mm |
Width 1 | 95 mm |
Brake System | Lucas - Girling |
Placement on Vehicle | Rear Axle |
Wear Warning Contact | excl. wear warning contact |
Type | Brake Pad Set, disc brake |
Height 1 | 57.3 mm |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Brake System | TRW |
Number of wear indicators | 2 Per Axle |
Thickness/Strength 1 | 15.2 mm |
Number of threaded bolts | 4 |
Function | Brake Pad Set, disc brake |
Number of pads | 4 |
Type | Brake Pad Set, disc brake |
Height 1 | 42.5 mm |
Width 1 | 95.5 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Wear Warning Contact | not prepared for wear warning indicator |
Thickness/Strength 1 | 19 mm |
Thickness/Strength 2 | 18.2 mm |
Brake System | Ate - Teves |
Number of pads | 4 |
Number of Springs | 2 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 66.9 mm |
Height 2 | 71.8 mm |
Width 1 | 155.2 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Thickness/Strength 1 | 15.4 mm |
Brake System | Akebono |
Number of wear indicators | 2 Per Axle |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Rear Axle |
Type | Brake Pad Set, disc brake |
Height 1 | 41.1 mm |
Width 1 | 99.8 mm |
Replaced by | BBP2220 |
Important compatibility info
Width | 42 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Width | 32 mm |
Function | Brake Shoe Set |
Inner Brake Drum Diameter | 203 mm |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Diameter | 22 mm |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Important compatibility info
Required quantity | 1 |
Function | Warning Contact, brake pad wear |
Length | 300 mm |
Type | Warning Contact, brake pad wear |
Placement on Vehicle | Front Axle |
Important compatibility info
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Replaced by | BBT336 |
Important compatibility info
Number of Holes | 12 |
Brake System | WABCO PAN17,MAXX17 |
Centering Diameter | 117 mm |
Minimum thickness | 28 mm |
Brake Disc Type | Vented |
Brake Disc Thickness | 34 mm |
Outer diameter | 330 mm |
Height | 123 mm |
Function | Brake Disc |
Type | Brake Disc |
Replaces | BBD32781 |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Outer diameter | 238 mm |
Quantity Unit | Set |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20 mm |
Centering Diameter | 61 mm |
Function | Brake Disc |
Number of Holes | 4 |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Important compatibility info
Outer diameter | 345 mm |
Surface | Coated |
Function | Brake Disc |
Centering Diameter | 67 mm |
Minimum thickness | 19.4 mm |
Brake Disc Thickness | 22 mm |
Height | 54 mm |
Rotor Style | perforated/vented |
Placement on Vehicle | Rear Axle |
Number of Holes | 5 |
Type | Brake Disc Rotor |
Quantity | 1 |
Number of mounting bores | 1 |
Important compatibility info
Function | Brake Hose |
Length | 253 mm |
Thread Measurement 2 | M10x1 |
Thread Measurement 1 | M10x1 |
Type | Brake Hose |
Thread Type | with internal thread |
Important compatibility info
Bore Diameter | 35.3 mm |
Version | Fitting Kit |
Thread Measurement 1 | M12x1.25 |
Bore Diameter 1 | 13.2 mm |
Function | Ball Joint |
Bore Diameter 2 | 16.8 mm |
Mounting Type | Pressed |
Type | Ball Joint |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
Hub Profile | 24.6 x 21.2 |
Number of Parts | 3 -part |
Outer diameter | 212 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 21 |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 22.3 x 19.8 |
Outer diameter | 215 mm |
Clutch Equipment | Pull Type Clutch |
Function | Clutch Kit |
Number of Teeth | 20 |
Type | Clutch Kit |
Important compatibility info
Wear Warning Contact | prepared for wear warning indicator |
Brake System | TRW |
Thickness/Strength 1 | 18 mm |
Number of pads | 4 |
Number of threaded bolts | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 60.9 mm |
Height 2 | 58.5 mm |
Width 1 | 136.8 mm |
Replaces | BBP2553 |
Placement on Vehicle | Rear Axle |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023