Important compatibility info
Length | 100 mm |
Inner diameter 2 | 35 mm |
Function | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Placement on Vehicle | Front Axle Right, transmission sided |
Inner diameter 1 | 71 mm |
Important compatibility info
Function | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Length | 96 mm |
Inner diameter 2 | 77 mm |
Inner diameter 1 | 28 mm |
Extra Description | Trilobe |
Type | Bellow Kit, drive shaft |
Important compatibility info
Function | Master Cylinder, clutch |
Inner diameter | 15.87 mm |
Type | Master Cylinder, clutch |
Important compatibility info
Function | Cable Pull, parking brake |
Length 2 | 720 mm |
Type | Cable Pull, parking brake |
Length 1 | 967 mm |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Material | Metal |
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 335 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Replaces | BDL7107; BDL7136; BDL7449 |
Important compatibility info
Thread Size | M10X1.25 |
Length | 225 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 310 mm |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Material | Cast Steel |
Placement on Vehicle | Front Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL7368 |
Important compatibility info
Replaces | BEM3403 |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Upper Right |
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Material | Aluminium |
Type | Mounting, engine |
Placement on Vehicle | Upper Left |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 441 mm |
Function | Brake Hose |
Additional Information | with banjo fitting |
Type | Brake Hose |
Thread Type | with internal thread |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Thread Measurement 1 | M10x1 |
Important compatibility info
Length | 250 mm |
Height | 58 mm |
Width | 116 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Important compatibility info
Function | Air Filter |
Width | 118 mm |
Height | 40 mm |
Length | 178 mm |
Type | Air Filter |
Filter type | Filter Insert |
Important compatibility info
Important compatibility info
Length | 242 mm |
Height | 20 mm |
Width | 204 mm |
Function | Filter, cabin air |
Type | Filter, cabin air |
Filter type | Particulate Filter |
Important compatibility info
Thread Length | 8 mm |
Height | 263 mm |
Function | Fuel filter |
Thread Length 1 | 14 mm |
Type | Fuel filter |
Outer diameter | 55 mm |
Filter type | In-Line Filter |
Important compatibility info
Height | 90 mm |
Outer diameter | 93 mm |
Additional Information 2 | with one anti-return valve |
Thread Size | UNF 3/4"-16 |
Filter type | Spin-on Filter |
Seal Diameter | 71.5 mm |
Valve type | Pressure Limiting Valve |
Function | Oil Filter |
Type | Oil Filter |
Replaced by | BFO4150 |
Important compatibility info
Length 1 | 2710 mm |
Function | Accelerator Cable |
Type | Accelerator Cable |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Important compatibility info
External Teeth, Diff.Side | 23 |
External Teeth, Wheel Side | 26 |
Placement on Vehicle | Front Axle Left |
Length | 634 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Number of Teeth, ABS ring | 48 |
Important compatibility info
Length 1 | 910 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Front |
Important compatibility info
Length 1 | 1803 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 822 mm |
External Teeth, Wheel Side | 35 |
External Teeth, Diff.Side | 41 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Length 1 | 320 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Front |
Important compatibility info
Length 4 | 910 mm |
Length 1 | 1243 mm |
Function | Cable Pull, manual transmission |
Length 2 | 880 mm |
Length 3 | 1120 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Dust protection diameter 2 | 55 mm |
Function | Dust Cover Kit, shock absorber |
Diameter 2 bump stop | 57 mm |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Diameter 1 bump stop | 21 mm |
Dust protection diameter 1 | 48 mm |
Dust protection height | 169 mm |
Height of bump stop | 70 mm |
Important compatibility info
Placement on Vehicle | Front Axle, Right, Rear |
Inner diameter | 18.8 mm |
Function | Mounting, control/trailing arm |
Length | 73 mm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6135 |
Important compatibility info
Placement on Vehicle | Front Axle |
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Important compatibility info
Function | Bushing, axle cross member |
Type | Bushing, axle cross member |
Important compatibility info
Length | 91 mm |
Inner diameter | 22 mm |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK7542 |
Important compatibility info
Inner diameter | 14 mm |
Diameter | 75.6 mm |
Length | 75 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK7798 |
Placement on Vehicle | Rear Axle, Left, Right, Upper, Front |
Important compatibility info
Outer diameter | 130 mm |
Inner diameter | 14 mm |
Additional Information 2 | with bearing |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 50 mm |
Paired article numbers | FSM5009 |
Important compatibility info
Inner diameter | 10 mm |
Distance of fastening bolts | 125 mm |
Height | 62 mm |
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5282 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7945 |
Diameter | 21 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5786)
Important compatibility info
Inner diameter 1 | 38 mm |
Material | PE (Polyethylene) |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Inner diameter 2 | 38 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2007S)
Important compatibility info
Inner diameter 1 | 44 mm |
Inner diameter 2 | 44 mm |
Function | Charge Air Hose |
Colour | Black |
Type | Charge Air Hose |
Material | PE (Polyethylene) |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1105S)
Important compatibility info
Length | 958 mm |
Thread Measurement 1 | M30X1.5 RHT |
Thread Measurement 2 | M24X1.5 |
Rod/Strut | Push Rod |
Pipe Diameter | 38 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, inner, outer |
Thread Measurement 1 | M18x1.5 |
Thread Type | with left-hand thread, with external thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR4523 |
Important compatibility info
Thread Measurement 1 | M12x1.25 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5381 |
Placement on Vehicle | Front Axle Right, outer |
Important compatibility info
Thread Measurement 1 | M12x1.25 |
Thread Type | with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5665 |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Function | Tie Rod End |
Thread Measurement 1 | M14x1.5mm |
Type | Tie Rod End |
Paired article numbers | FTR5925 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Bearing Code | Gen 0 |
Inner diameter 1 | 35 mm |
Inner diameter 2 | 35 mm |
Outer diameter 1 | 60 mm |
Width 1 | 18.5 mm |
Outer diameter 2 | 60 mm |
Width 2 | 18.5 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Outer diameter 1 | 137 mm |
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 3 |
Additional Information 2 | with integrated ABS sensor |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Bearing Code | Gen 0 |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 28 mm |
Outer diameter 1 | 52 mm |
Width 1 | 18.5 mm |
Outer diameter 2 | 52 mm |
Width 2 | 18.5 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Required quantity | 2 |
Function | Warning Contact, brake pad wear |
Length | 395 mm |
Type | Warning Contact, brake pad wear |
Placement on Vehicle | Front Axle |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Height | 78.5 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Thread Size | M8 |
Impeller Diameter | 60 mm |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Rear Axle |
Height | 33 mm |
Outer diameter | 238 mm |
Brake Disc Thickness | 9 mm |
Number of Holes | 4 |
Minimum thickness | 8 mm |
Centering Diameter | 61 mm |
Surface | Coated |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | solid |
Number of mounting bores | 3 |
Important compatibility info
Placement on Vehicle | Rear |
Type | Mounting, engine |
Length | 183 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Important compatibility info
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Material | Plastic |
Diameter | 20.6 mm |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023