Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided | 
| Length | 80 mm | 
| Material | Rubber | 
| Inner diameter 1 | 20 mm | 
| Inner diameter 2 | 68 mm | 
| Function | Bellow Kit, drive shaft | 
| Type | Bellow Kit, drive shaft | 
| Joint Type | Tripod Joint | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101949)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45636)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Additional Information 2 | with lid | 
| Tightening Torque | 85 Nm | 
| Width | 37.8 mm | 
| Outer diameter | 59.9 mm | 
| Inner diameter | 17 mm | 
| Function | Alternator Freewheel Clutch | 
| Type | Alternator Freewheel Clutch | 
| Number of Ribs | 6 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 43 mm | 
| Function | Alternator Freewheel Clutch | 
| Type | Alternator Freewheel Clutch | 
| Outer diameter | 63 mm | 
| Number of Ribs | 6 | 
| Tightening Torque | 85 Nm | 
| Additional Information 2 | with lid | 
| Inner diameter | 17 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) | 
| Function | Gasket, cylinder head cover | 
| Type | Gasket, cylinder head cover | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 88 mm | 
| Material | Rubber | 
| Inner diameter 1 | 19 mm | 
| Inner diameter 2 | 64 mm | 
| Function | Bellow Kit, drive shaft | 
| Type | Bellow Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101961)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Length | 91 mm | 
| Material | Rubber | 
| Inner diameter 2 | 71 mm | 
| Function | Bellow Kit, drive shaft | 
| Type | Bellow Kit, drive shaft | 
| Inner diameter 1 | 21 mm | 
| Additional Information 2 | with clamps | 
| Additional Information | with grease | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101963)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Height | 100 mm | 
| Outer diameter | 34 mm | 
| Function | Hydraulic Filter, automatic transmission | 
| Type | Hydraulic Filter, automatic transmission | 
| Filter type | Filter Insert | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic | 
| Function | Plug-in housing, automatic transmission (control unit) | 
| Extra Description | febi Plus | 
| Type | Plug-in housing, automatic transmission (control unit) | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Pneumatic | 
| Placement on Vehicle | Front | 
| Function | Shock Absorber, driver cab suspension | 
| Min. Length | 254 mm | 
| External Thread Size | M12 x 1,5 | 
| Max. Length | 353 mm | 
| Mounting points diameter | 14 mm. 25 mm | 
| Type | Shock Absorber, driver cab suspension | 
| Shock Absorber Mounting Type | Top eye, Bottom eye | 
| Piston conrod diameter | 15 mm | 
| Replaces | 19560 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Duplex, Closed chain | 
| Number of Chain Links | 84 | 
| Function | Chain Kit, oil pump drive | 
| Type | Chain Kit, oil pump drive | 
| Extra Description | Standard Medium Kit | 
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Left | 
| Material | Plastic | 
| Colour | Black | 
| Function | Exterior Door Handle | 
| Extra Description | febi Plus | 
| Type | Exterior Door Handle | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Right | 
| Function | Roller Guide, sliding door | 
| Extra Description | febi Plus | 
| Type | Roller Guide, sliding door | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Interior Door Panel, Front, Right | 
| Material | Plastic | 
| Paired article numbers | 101986 | 
| Colour | Black | 
| Function | Door Handle, interior equipment | 
| Extra Description | febi Plus | 
| Type | Door Handle, interior equipment | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Interior Door Panel, Front, Left | 
| Material | Plastic | 
| Paired article numbers | 101985 | 
| Colour | Black | 
| Function | Door Handle, interior equipment | 
| Extra Description | febi Plus | 
| Type | Door Handle, interior equipment | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Centre, Right | 
| Type | Roller Guide, sliding door | 
| Function | Roller Guide, sliding door | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front | 
| Paired article numbers | 101989 | 
| Function | Lock Cylinder | 
| Type | Lock Cylinder | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 40 mm | 
| Length | 114 mm | 
| Width | 91 mm | 
| Material | Rubber/Metal | 
| Mounting points diameter | 11.5 mm | 
| Function | Rubber Buffer, suspension | 
| Type | Rubber Buffer, suspension | 
| Placement on Vehicle | Front Axle | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 41 mm | 
| Outer diameter | 167 mm | 
| Inner diameter | 46 mm | 
| Number of Ribs | 5 | 
| Parameter | 6PK | 
| Function | Belt Pulley, crankshaft | 
| Type | Belt Pulley, crankshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front | 
| Operating Mode | Mechanical | 
| Shock Absorber Mounting Type | Top pin, Bottom Pin | 
| Max. Length | 309 mm | 
| Min. Length | 204 mm | 
| Pipe Diameter | 51 mm. 40 mm | 
| Piston conrod diameter | 13 mm | 
| Type | Shock Absorber, driver cab suspension | 
| Function | Shock Absorber, driver cab suspension | 
| External Thread Size | M12 x 1,75 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front | 
| Operating Mode | Mechanical | 
| Shock Absorber Mounting Type | Top eye, Bottom eye | 
| Min. Length | 282 mm | 
| Pipe Diameter | 38 mm | 
| Mounting points diameter | 25 mm. 14 mm | 
| Piston conrod diameter | 13 mm | 
| Type | Shock Absorber, driver cab suspension | 
| Function | Shock Absorber, driver cab suspension | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 415 mm | 
| Height | 0.75 mm | 
| Width | 276 mm | 
| Function | Gasket, oil sump | 
| Type | Gasket, oil sump | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 17 | 
| Number of Connectors / Ports | 2 | 
| Function | Sensor, exhaust gas temperature | 
| Type | Sensor, exhaust gas temperature | 
| Cable Length | 370 mm | 
| for OE number | 006 153 07 28 | 
| External Thread Size | M16 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 38 mm | 
| Piston conrod diameter | 13 mm | 
| Type | Shock Absorber, driver cab suspension | 
| Shock Absorber Mounting Type | Top eye, Bottom eye | 
| Min. Length | 347 mm | 
| Placement on Vehicle | Front | 
| Function | Shock Absorber, driver cab suspension | 
| Mounting points diameter | 14 mm. 25 mm | 
| Operating Mode | Mechanical | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belts | with rounded tooth profile | 
| Function | Timing Belt Kit | 
| Width 1 | 19 mm | 
| Replaces | 26184 | 
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) | 
| Number of Teeth 2 | 163 | 
| Number of Teeth 1 | 99 | 
| Width 2 | 25.4 mm | 
| Type | Timing Belt Kit | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26113)
- 1x Febi Tensioner Pulley, timing belt (10620)
- 1x Febi Timing Belt (11145)
- 1x Febi Tensioner Pulley, timing belt (15279)
Important compatibility info
| Function | Tilt Cylinder, driver cab | 
| Pressure side external thread size | M14 x 1,5 | 
| Suction side external thread size | M12 x 1,5 | 
| Length | 1342 mm | 
| Outer diameter | 50 mm. 52 mm | 
| Number of Connectors / Ports | 2 | 
| Stroke | 596 mm | 
| Mounting points diameter | 20 mm. 30 mm | 
| Type | Tilt Cylinder, driver cab | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 14 95 680 21R | 
| Operating Mode | Electric-pneumatic | 
| Number of Connectors / Ports | 2 | 
| Function | Pressure Converter, exhaust control | 
| Extra Description | febi Plus | 
| Type | Pressure Converter, exhaust control | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 | 
| Function | Pressure Converter, exhaust control | 
| Extra Description | febi Plus | 
| Type | Pressure Converter, exhaust control | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter 2 | 138 mm | 
| Outer diameter 1 | 68 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Width | 57 mm | 
| Outer diameter | 83 mm | 
| Thickness | 100 mm | 
| Inner diameter | 28 mm | 
| Bearing Type | Angular Ball Bearing | 
| Function | Wheel Bearing Kit | 
| Additional Information | with axle nut | 
| Sealing lip material | NBR (nitrile butadiene rubber) | 
| Type | Wheel Bearing Kit | 
| Additional Information 2 | Wheel Bearing integrated into wheel hub | 
| Bolt Hole Circle Diameter | 114 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (185358)
- 1x Febi Nut (185828)
Important compatibility info
| Length | 785 mm | 
| Width | 280 mm | 
| Height | 285 mm | 
| Colour | Black | 
| Function | Oil sump | 
| Wet Sump Material | Sheet Steel | 
| Type | Oil sump | 
| Additional Information | with oil drain plug | 
| Additional Information 2 | with seal ring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 440 mm | 
| Height | 170 mm | 
| Width | 255 mm | 
| Colour | Black | 
| Function | Oil sump | 
| Wet Sump Material | Sheet Steel | 
| Type | Oil sump | 
| Additional Information | with oil drain plug | 
| Additional Information 2 | with seal ring | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 | 
| Wet Sump Material | Sheet Steel | 
| Length | 550 mm | 
| Height | 285 mm | 
| Width | 205 mm | 
| Colour | Black | 
| Type | Oil sump | 
| Function | Oil sump | 
| Additional Information | with oil drain plug | 
| Additional Information 2 | with seal ring | 
| Spanner Size | 22 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Standard Medium Kit | 
| Placement on Vehicle | Upper, Lower | 
| Chain Type | Simplex, Closed chain | 
| Number of Chain Links | 86. 70 | 
| Timing Chain Size | G53HS, G68HS | 
| Type | Timing Chain Kit | 
| Function | Timing Chain Kit | 
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49505)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28725)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Timing Chain (49528)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (48770)
- 1x Febi Guide, timing chain (48773)
- 1x Febi Gear, injection pump (101088)
- 1x Febi Gear/Sprocket, camshaft (101918)
- 1x Febi Oil Jet, timing chain (101919)
- 1x Febi Shaft Seal, crankshaft (102041)
Important compatibility info
| Placement on Vehicle | transmission sided | 
| Material | PTFE (polytetrafluoroethylene) | 
| Outer diameter | 104 mm | 
| Inner diameter | 90 mm | 
| Function | Shaft Seal, crankshaft | 
| Thickness | 9 mm | 
| Type | Shaft Seal, crankshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 133 mm | 
| Thickness | 36 mm | 
| Inner diameter | 28 mm | 
| Number of Ribs | 5 | 
| Parameter | 6PK | 
| Function | Belt Pulley, crankshaft | 
| Type | Belt Pulley, crankshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 166 mm | 
| Thickness | 41 mm | 
| Inner diameter | 58 mm | 
| Number of Ribs | 7 | 
| Parameter | 8PK | 
| Function | Belt Pulley, crankshaft | 
| Type | Belt Pulley, crankshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 44 mm | 
| Outer diameter | 104 mm | 
| Inner diameter | 43 mm | 
| Number of Ribs | 3 | 
| Parameter | 4PK | 
| Function | Belt Pulley, crankshaft | 
| Type | Belt Pulley, crankshaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 125 mm | 
| Function | Gasket, cylinder head cover | 
| Length | 775 mm | 
| Height | 15 mm | 
| Type | Gasket, cylinder head cover | 
| Seal Material | FPM (fluoride rubber) | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric-pneumatic | 
| Number of Connectors / Ports | 2 | 
| Function | Pressure Converter, exhaust control | 
| for OE number | 14 95 662 15R | 
| Extra Description | febi Plus | 
| Type | Pressure Converter, exhaust control | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 100 mm | 
| Material | Thermoplast | 
| Inner diameter 1 | 27 mm | 
| Inner diameter 2 | 78 mm | 
| Function | Bellow Kit, drive shaft | 
| Type | Bellow Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (102061)
- 1x Febi Clamping Clip (27100)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 155 mm | 
| Material | Thermoplast | 
| Inner diameter 2 | 51 mm | 
| Function | Bellow Kit, steering | 
| Type | Bellow Kit, steering | 
| Inner diameter 1 | 14 mm | 
| Additional Information 2 | with clamps | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (102064)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38763)
Important compatibility info
| Additional Information 2 | with clamps | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 166 mm | 
| Material | Thermoplast | 
| Inner diameter 1 | 14 mm | 
| Inner diameter 2 | 50 mm | 
| Type | Bellow Kit, steering | 
| Function | Bellow Kit, steering | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (102066)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38762)
Important compatibility info
| Inner diameter 1 | 16 mm | 
| Additional Information 2 | with clamps | 
| Material | Thermoplast | 
| Inner diameter 2 | 53 mm | 
| Type | Bellow Kit, steering | 
| Function | Bellow Kit, steering | 
| Paired article numbers | 102110 | 
| Length | 200 mm | 
| Placement on Vehicle | Passenger Side | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (102070)
- 1x Febi Clamping Clip (26348)
- 1x Febi Clamping Clip (38763)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 160 mm | 
| Material | Thermoplast | 
| Inner diameter 1 | 15 mm | 
| Inner diameter 2 | 49 mm | 
| Function | Bellow Kit, steering | 
| Type | Bellow Kit, steering | 
| Additional Information 2 | with clamps | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (102072)
- 1x Febi Clamping Clip (26348)
- 1x Febi Clamping Clip (38763)
Important compatibility info
| Type | Suspension Strut Support Mount | 
| Material | Rubber/Metal | 
| Function | Suspension Strut Support Mount | 
| Placement on Vehicle | Front Axle Right | 
| Paired article numbers | 102079 | 
| Additional Information 2 | without ball bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front, inner, Front Axle Right | 
| Length | 73 mm | 
| Width | 73 mm | 
| Material | Rubber/Metal | 
| Outer diameter | 73 mm | 
| Thickness | 60 mm | 
| Type | Mounting, control/trailing arm | 
| Function | Mounting, control/trailing arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
| Placement on Vehicle | Front, Left | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Type | Mounting, control/trailing arm | 
| Function | Mounting, control/trailing arm | 
| Thickness | 51 mm | 
| Outer diameter | 51 mm | 
| Material | Rubber/Metal | 
| Length | 60 mm | 
| Placement on Vehicle | Rear Axle, Upper, Lower | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Front Axle | 
| Length | 59.5 mm | 
| Material | Rubber/Metal | 
| Outer diameter | 37.2 mm | 
| Thickness | 49 mm | 
| Inner diameter | 16.5 mm | 
| Function | Mounting, control/trailing arm | 
| Type | Mounting, control/trailing arm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
| for OE number | 12361-11181 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 53 mm | 
| Material | Rubber/Metal | 
| Inner diameter | 21 mm | 
| Function | Bushing, leaf spring | 
| Type | Bushing, leaf spring | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































