Important compatibility info
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Inner diameter 2 | 81 mm |
| Inner diameter 1 | 25 mm |
| Length | 114 mm |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
Important compatibility info
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 105 mm |
| Inner diameter | 56 mm |
| Thickness | 35 mm |
| Outer diameter | 140 mm |
Important compatibility info
| Length | 101 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Thread Measurement 2 | M10X1.5 |
| Thread Size | M10X1.5 |
| Length | 50 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7198 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Height | 38 mm |
| Width | 54 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Length | 119 mm |
| Type | Mounting, engine |
Important compatibility info
| Width | 130 mm |
| Inner diameter | 8 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Height | 140 mm |
| Type | Mounting, engine |
| Placement on Vehicle | Lower Left |
Important compatibility info
| Length 1 | 1050 mm |
| Function | Cable Pull, manual transmission |
| Length 2 | 735 mm |
| Type | Cable Pull, manual transmission |
| Number of Gears | for forwards gear |
Important compatibility info
| Length 2 | 994 mm |
| Length 1 | 1315 mm |
| Number of Gears | for reverse gear |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 1 | 1675 mm |
| Function | Cable Pull, manual transmission |
| Length 3 | 1540 mm |
| Length 4 | 1202 mm |
| Type | Cable Pull, manual transmission |
| Length 2 | 1420 mm |
Important compatibility info
| Dust protection diameter 2 | 57 mm |
| Dust protection height | 163 mm |
| Height of bump stop | 136 mm |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Diameter 1 bump stop | 16 mm |
| Placement on Vehicle | Front Axle |
| Diameter 2 bump stop | 37 mm |
| Dust protection diameter 1 | 35 mm |
Important compatibility info
| Length | 165 mm |
| Inner diameter 2 | 38 mm |
| Inner diameter 1 | 10 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Material | Rubber |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
Important compatibility info
| Length | 218 mm |
| Function | Bellow Kit, steering |
| Material | Thermoplast |
| Inner diameter 2 | 46 mm |
| Inner diameter 1 | 12 mm |
| Type | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Length | 52 mm |
| Inner diameter | 18 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7278 |
| Placement on Vehicle | Front Axle, Left, Right, Rear |
Important compatibility info
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Inner diameter | 17 mm |
| Height | 28 mm |
| Type | Suspension Strut Support Mount |
| Outer diameter | 92 mm |
| Paired article numbers | FSM5122 |
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 54 mm |
| Inner diameter 1 | 59 mm |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Material | PE (Polyethylene) |
| Placement on Vehicle | Left, Lower, Front |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1109S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2005S)
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with right-hand thread, with external thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Thread Measurement 2 | M20X1.5 F |
| Length | 150 mm |
| Thread Measurement 1 | M18X1.5 M |
| Function | Inner Tie Rod |
| Axle Joint Length | 150 mm |
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Type | Inner Tie Rod |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Thread Measurement 2 | M14X2.0 |
| Length | 197 mm |
| Thread Measurement 1 | M16X1.5 |
| for steering manufacturer | SMI |
| Function | Inner Tie Rod |
| Axle Joint Length | 197 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Housing Type | without housing |
| Replaces | BWP1516 |
| Type | Water Pump, engine cooling |
Important compatibility info
| Impeller Diameter | 60 mm |
| Water Pump Pulley Diameter | 52 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Replaces | BWP2264 |
Important compatibility info
| Function | Air Filter |
| Frame Material | Plastic |
| Width | 146 mm |
| Height | 56 mm |
| Length | 248 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Seal Diameter | 63 mm |
| Thread Size | M20X1.5 |
| Outer diameter | 69 mm |
| Height | 86 mm |
| Filter type | Spin-on Filter |
| Function | Oil Filter |
| Type | Oil Filter |
Important compatibility info
| Function | Air Filter |
| Frame Material | Plastic |
| Length | 197 mm |
| Type | Air Filter |
| Height | 52 mm |
| Width | 148 mm |
| Filter type | Filter Insert |
Important compatibility info
| Axle Joint Length | 304 mm |
| Length | 304 mm |
| Thread Measurement 1 | M16x1.5 |
| Thread Measurement 2 | M16x1.5 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without bearing |
| Inner diameter | 12 mm |
| Paired article numbers | FSM5574 |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Inner diameter | 19.05 mm |
| Material | Plastic |
| Additional Information 2 | without sensor |
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Length | 135 mm |
| Inner diameter | 12 mm |
Important compatibility info
| Diameter | 19.1 mm |
| Material | Aluminium |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 187 mm |
| Thread Size | M12X1.5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
Important compatibility info
| Inlet Diameter | 13.3 mm |
| Function | Central Slave Cylinder, clutch |
| Base body material | Plastic |
| Type | Central Slave Cylinder, clutch |
Important compatibility info
| Function | Central Slave Cylinder, clutch |
| Base body material | Plastic |
| Type | Central Slave Cylinder, clutch |
Important compatibility info
| Number of Teeth | 26 |
| Number of Parts | 2 -part |
| Hub Profile | 21.9 x 19.9 |
| Outer diameter | 215 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Hub Profile | 23 x 20.1 |
| Outer diameter | 215 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 26.6 x 23.5 |
| Outer diameter | 203 mm |
| Function | Clutch Kit |
| Number of Teeth | 23 |
| Type | Clutch Kit |
Important compatibility info
| Additional Information | with central slave cylinder |
| Number of Parts | 3 -part |
| Hub Profile | 25 x 22 |
| Function | Clutch Kit |
| Number of Teeth | 14 |
| Type | Clutch Kit |
Important compatibility info
| Additional Information | with central slave cylinder |
| Number of Parts | 3 -part |
| Number of Teeth | 18 |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Function | Thermostat, coolant |
| Housing material | Plastic |
| Housing Type | with housing |
| Opening Temperature | 88 °C |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
| Number of Connectors / Ports | 4 |
Important compatibility info
| Length | 180 mm |
| Height | 106 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Inner diameter | 10 mm |
| Type | Mounting, engine |
Important compatibility info
| Length 1 | 1620 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7002 |
| Placement on Vehicle | Rear Axle, Left, Right, Lower, Rear |
Important compatibility info
| Thread Measurement 2 | M14x1.5 |
| Thread Measurement 1 | M16x1.5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5752 |
| Placement on Vehicle | Front Axle Left, outer |
Important compatibility info
| Axle Joint Length | 202 mm |
| Thread Measurement 2 | M16X1.5 |
| Length | 202 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Number of Teeth | 23 |
| Hub Profile | 26.3 x 23.3 |
| Outer diameter | 240 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 17 |
| Number of Parts | 2 -part |
| Hub Profile | 20 x 17.2 |
| Outer diameter | 220 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Number of Teeth | 26 |
| Number of Parts | 3 -part |
| Hub Profile | 35.3 x 32.6 |
| Outer diameter | 240 mm |
| Type | Clutch Kit |
| Additional Information 2 | Self-adjusting |
| Replaces | HK2379; HK2510 |
Important compatibility info
| Number of Parts | 3 -part |
| Outer diameter | 190 mm |
| Hub Profile | 22.2 x 19 |
| Function | Clutch Kit |
| Number of Teeth | 19 |
| Type | Clutch Kit |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 26 x 23 |
| Outer diameter | 220 mm |
| Function | Clutch Kit |
| Number of Teeth | 24 |
| Type | Clutch Kit |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 21.9 x 20.1 |
| Outer diameter | 181 mm |
| Function | Clutch Kit |
| Number of Teeth | 26 |
| Type | Clutch Kit |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































