Important compatibility info
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.369 kg |
Placement on Vehicle | Rear |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Weight | 0.870 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with belt pulley |
Alternator Charge Current | 140 A |
Belt Pulley Diameter | 55 mm |
Weight | 7.3 kg |
Current Strength | 140 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 75 mm |
Outer diameter | 39.8 mm. 46 mm |
Spanner Size | 19 |
Thread Length | 12 mm |
Number of Connectors / Ports | 2 |
Control Range | 0,25+0,15 bar |
Function | Sensor, oil pressure |
Switch point to | 5 bar |
for OE number | 001 542 56 17 |
Weight | 0.116 kg |
External Thread Size | M14 x 1,5 |
Type | Sensor, oil pressure |
Switch | with alarm switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 840 mm |
Outer diameter | 52.0 mm |
Rod/Strut | Push Rod |
Outer thread | M27 x 1,5 mm |
Driver Position | for left-hand drive vehicles |
Weight | 9.42 kg |
Inner thread | M30 x 1,5 RHT mm |
Cone Size | 32 mm |
Pipe Diameter | 52 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Important compatibility info
Weight | 4.42 kg |
Additional Information | with rubber mounts |
Placement on Vehicle | Rear Axle |
Type | Stabiliser Bar, suspension |
Function | Stabiliser Bar, suspension |
for OE number | 204 326 10 65 S1 |
Additional Information 2 | with coupling rod |
Stabiliser Diameter | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171133)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 2x Febi Nut (06859)
Important compatibility info
Width of castor bearing surface | 32 mm |
Material | Plastic |
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 74 mm |
Weight | 0.350 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
for OE number | 1 510 697 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 395.5 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 18 mm |
Placement on Vehicle | both sides |
Length | 686 mm |
Housing Diameter | 19 mm |
Eject Force | 550 N |
Stroke | 180 mm |
Type | Gas Spring, boot/cargo area |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
Weight | 6.25 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 228 mm. 191 mm |
Thickness | 194 mm. 600 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2050 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Weight | 0.279 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Surface | Coated |
Number of mounting bores | 1 |
Centering Diameter | 79 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 348 mm |
Thickness | 77.2 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 28.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Machining | High-carbon |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Rotor Style | Internally Vented |
Weight | 11.46 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.396 kg |
External Teeth, Wheel Side | 28 |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Additional Information | with Split Pin |
Thread Size | M24x1,5 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 88.9 mm |
Wheel Sided Joint Diameter | 90.9 mm |
Min. Length | 642 mm |
External Teeth, Diff.Side | 37 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 184 mm |
Internal Thread Size | 3/4" - 16 UNF |
Outer diameter | 108 mm |
Filter type | Spin-on Filter |
Weight | 0.935 kg |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.061 kg |
Outer diameter | 48 mm |
Opening Temperature | 74 °C |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.188 kg |
Placement on Vehicle | Front Axle Right, Rear Axle Right |
Length | 2715 mm |
Number of Connectors / Ports | 2 |
Resistance | 1150 Ohm |
Function | Sensor, wheel speed |
Paired article numbers | 178719 |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 120 mm |
Length | 154 mm |
Type | Joint, propshaft |
for OE number | 447 410 60 00 SK1 |
Placement on Vehicle | Front, Rear |
Weight | 0.805 kg |
Thickness | 36 mm |
Outer diameter | 154 mm |
Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.625 kg |
Length | 190 mm |
Placement on Vehicle | Rear Axle Left |
Thread Length | 38 mm |
Material | Steel |
Thickness | 12 mm |
Spanner Size | 21 |
Paired article numbers | 106862 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M14 x 2 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 49.8 mm. 44.3 mm |
Length | 98.5 mm |
Placement on Vehicle | Rear Axle |
Weight | 0.927 kg |
Wear Warning Contact | prepared for wear warning indicator |
Thickness/Strength 1 | 16.5 mm |
Type | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 885 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 344 mm |
Min. Length | 249 mm |
Pipe Diameter | 40 mm |
Mounting points diameter | 12 mm |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023