Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Code | Gen 1 |
| Type | Wheel Bearing Kit |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inner diameter 1 | 42 mm |
| Outer diameter 1 | 80 mm |
| Width 1 | 42 mm |
| Tightening Torque | 280 Nm |
| Bearing Code | Gen 1 |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 17 mm |
| Outer diameter 1 | 50 mm |
| Width 1 | 15 mm |
| Outer diameter 2 | 40 mm |
| Width 2 | 15 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 0 |
Important compatibility info
| Material | Cast Steel |
| Length | 117 mm |
| Thread Size | M12x1.25 |
| Thread Measurement 2 | M12x1.25 |
| Rod/Strut | Suspension Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Length | 49.7 mm |
| Diameter | 48.8 mm |
| Inner diameter | 14.2 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle, Left, Right, inner, Lower, Front |
| Paired article numbers | FSK8044 |
Important compatibility info
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5477 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Width | 190 mm |
| Inner diameter | 6 mm |
| Placement on Vehicle | Upper, Front, transmission sided |
| Height | 86 mm |
| Length | 234 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Opening Temperature | 85 °C |
| Additional Information | with gaskets/seals |
| Type | Thermostat, coolant |
Important compatibility info
| Paired article numbers | FCA7709 |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
- 2x Borg & Beck Mounting, control/trailing arm (BSK8167)
Important compatibility info
| Length | 256 mm |
| Height | 36 mm |
| Width | 165 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Paired article numbers | FSK8144 |
| Inner diameter | 12.2 mm |
| Length | 94 mm |
| Diameter | 79.8 mm |
Important compatibility info
| Paired article numbers | FCA7832 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Length | 400 mm |
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | FCA7848 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8152)
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Thread Measurement 2 | M10x1 |
| Additional Information 2 | with banjo bolt |
| Additional Information | with banjo fitting |
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 425 mm |
| Thread Type | with internal thread |
| Mounting Bolt Thread Size | M10x1 |
Important compatibility info
| Length | 154 mm |
| Thread Size | M24X1,5 |
| External Teeth, Wheel Side | 30 |
| Seal Diameter | 52.3 mm |
| Internal Teeth, wheel side | 23 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Placement on Vehicle | Left Front |
| Height | 70 mm |
| Width | 135 mm |
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Length | 83 mm |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 75 mm |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6928 |
Important compatibility info
| Number of Rivet Holes | 3 |
| Thread Size | M16x1.5 |
| Version | Fitting Kit |
| Bore Diameter 1 | 21.4 mm |
| Function | Ball Joint |
| Bore Diameter 2 | 24.4 mm |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter | 8.5 mm |
Important compatibility info
| Version | Fitting Kit |
| Bore Diameter | 44.3 mm |
| Thread Measurement 1 | M16x1.5 |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Bore Diameter 1 | 18.1 mm |
| Bore Diameter 2 | 20.3 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
| Replaces | BBJ5490 |
Important compatibility info
| Operating Mode | electronically controlled |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with sensor, with flange |
| Housing Type | with housing |
| Housing material | Plastic |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 103 °C |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6909 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Inner diameter 2 | 89 mm |
| Inner diameter 1 | 27 mm |
| Length | 125 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Length | 100 mm |
| Inner diameter 2 | 75 mm |
| Inner diameter 1 | 22 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Important compatibility info
| Extra Description | Trilobe |
| Function | Bellow Kit, drive shaft |
| Length | 97 mm |
| Inner diameter 2 | 78 mm |
| Inner diameter 1 | 26 mm |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Thread Measurement 2 | M12X1.75 |
| Thread Size | M12X1.75 |
| Length | 345 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 187 mm |
| Height | 25 mm |
| Length | 186 mm |
| Paired article numbers | BFC1255 |
| Type | Filter, cabin air |
Important compatibility info
| Function | Filter, cabin air |
| Width | 186 mm |
| Height | 29 mm |
| Length | 216 mm |
| Type | Filter, cabin air |
| Filter type | Particulate Filter |
Important compatibility info
| Thread Size | M22X1.5 |
| Function | Nut, kingpin |
| Type | Nut, kingpin |
Important compatibility info
| Dust protection diameter 2 | 51 mm |
| Height of bump stop | 119 mm |
| Dust protection diameter 1 | 48 mm |
| Diameter 2 bump stop | 10 mm |
| Function | Dust Cover Kit, shock absorber |
| Diameter 1 bump stop | 15 mm |
| Dust protection height | 202 mm |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Dust protection diameter 1 | 35 mm |
| Dust protection diameter 2 | 51 mm |
| Shape/Form | Round |
| Function | Dust Cover Kit, shock absorber |
| Height of bump stop | 134 mm |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Dust protection height | 185 mm |
| Diameter 1 bump stop | 16 mm |
| Diameter 2 bump stop | 17 mm |
Important compatibility info
| Pressure | 1 bar |
| Material | Plastic |
| Pressure to | 15 psi |
| Function | Cap, coolant tank |
| Type | Cap, coolant tank |
Important compatibility info
| Length | 190 mm |
| Additional Information 2 | with clamps |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 59 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber |
Important compatibility info
| Inner diameter | 18 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6340 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 22 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
| Placement on Vehicle | Front Axle, Left, Right |
| Inner diameter | 14.3 mm |
| Diameter | 64.8 mm |
| Length | 63 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6701 |
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 2 | 82 mm |
| Colour | Black |
| Inner diameter 1 | 82 mm |
| Function | Intake Hose, air filter |
| Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
Important compatibility info
| Thread Measurement 1 | M16x1.5 |
| Thread Type | with right-hand thread, with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
| Thread Measurement 1 | M12x1.75 |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Thread Measurement 1 | M18X1.5 |
| Length | 262 mm |
| Function | Inner Tie Rod |
| Axle Joint Length | 262 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Material | Plastic |
| for OE number | 1109329 |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Mounting Type | Pressed |
| Function | Ball Joint |
| Version | Fitting Kit |
| Thread Measurement 1 | M14x1.5 |
| Diameter | 42 mm |
| Bore Diameter 1 | 17.2 mm |
| Bore Diameter 2 | 25.5 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 51 mm |
| Length | 174 mm |
| Material | Rubber |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
Important compatibility info
| Function | Brake Master Cylinder |
| Length | 25 mm |
| Type | Brake Master Cylinder |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 343 mm |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | FCA8106 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Extra Description | Trilobe |
| Length | 90 mm |
| Inner diameter 2 | 70 mm |
| Inner diameter 1 | 24 mm |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
Important compatibility info
| Inner diameter | 22 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Front Axle |
| Type | Repair Kit, stabiliser coupling rod |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































