Important compatibility info
Inner diameter 1 | 138.5 mm |
Placement on Vehicle | Front Axle |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Centre, Rear Axle Left, Rear Axle Right, Upper |
Paired article numbers | FCA7571 |
Important compatibility info
Function | Slave Cylinder, clutch |
Mounting points diameter | 35 mm |
Inner diameter | 20.64 mm |
Material | Cast Iron |
Type | Slave Cylinder, clutch |
Important compatibility info
Function | Brake Pad Set, disc brake |
Number of pads | 4 |
Thickness/Strength 1 | 18.6 mm |
Brake System | TRW |
Wear Warning Contact | prepared for wear warning indicator |
Height 2 | 62.8 mm |
Height 1 | 72.2 mm |
Type | Brake Pad Set, disc brake |
Width 1 | 133.8 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Rotor Style | Solid |
Surface | Coated |
Number of Holes | 4 |
Outer diameter | 236 mm |
Brake Disc Thickness | 10 mm |
Height | 41 mm |
Minimum thickness | 8.4 mm |
Centering Diameter | 64 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Number of mounting bores | 2 |
Important compatibility info
Brake Disc Thickness | 24 mm |
Height | 67 mm |
Rotor Style | Vented |
Outer diameter | 345 mm |
Number of Holes | 5 |
Minimum thickness | 22.4 mm |
Centering Diameter | 79 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Surface | Coated |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Surface | Coated |
Number of Holes | 4 |
Rotor Style | Vented |
Outer diameter | 256 mm |
Minimum thickness | 20 mm |
Centering Diameter | 60 mm |
Brake Disc Thickness | 22 mm |
Height | 40.1 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 4 |
Important compatibility info
Rotor Style | Vented |
Brake Disc Thickness | 20 mm |
Outer diameter | 365 mm |
Height | 59.8 mm |
Number of Holes | 5 |
Function | Brake Disc |
Centering Diameter | 79 mm |
Minimum thickness | 17 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 2 |
Important compatibility info
Additional Information 2 | without banjo bolt |
Thread Size | M10x1 |
Length | 600 mm |
Function | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with banjo fitting |
Type | Brake Hose |
Thread Type | with internal thread |
Important compatibility info
Thread Type | with internal thread |
Length | 575 mm |
Function | Brake Hose |
Thread Size | M10x1 |
Type | Brake Hose |
Additional Information 2 | without banjo bolt |
Placement on Vehicle | Front Axle Left |
Additional Information | with banjo fitting |
Important compatibility info
Thread Type | with internal thread |
Additional Information 2 | without banjo bolt |
Thread Size | M10x1 |
Length | 513 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Rear Axle Left |
Additional Information | with banjo fitting |
Important compatibility info
Length | 506 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Length | 764 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Brake Master Cylinder |
Length | 25 mm |
Type | Brake Master Cylinder |
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Brake System | Lucas - Girling |
Thickness/Strength 1 | 18.5 mm |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 62.7 mm |
Width 1 | 131.5 mm |
Number of threaded bolts | 4 |
Placement on Vehicle | Front Axle |
Important compatibility info
Inner Brake Drum Diameter | 280 mm |
Placement on Vehicle | Rear Axle |
Width | 65 mm |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Important compatibility info
Required quantity | 2 |
Function | Warning Contact, brake pad wear |
Length | 130 mm |
Type | Warning Contact, brake pad wear |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7634 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6875)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6876)
Important compatibility info
Function | Brake Disc |
Centering Diameter | 152 mm |
Type | Brake Disc |
Number of Holes | 8 |
Outer diameter | 335 mm |
Brake Disc Thickness | 34 mm |
Brake Disc Type | Vented |
Height | 111 mm |
Minimum thickness | 28 mm |
Important compatibility info
Impeller Diameter | 54 mm |
Water Pump Pulley Diameter | 95 mm |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Brake Hose |
Length | 167 mm |
Placement on Vehicle | Rear Axle, Left, inner |
Type | Brake Hose |
Important compatibility info
Number of Teeth | 23 |
Hub Profile | 25.9 x 23.1 |
Outer diameter | 241 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Number of Parts | 2 -part |
Type | Clutch Kit |
Important compatibility info
Version | Fitting Kit |
Thread Measurement 2 | M45x1.5 |
Thread Measurement 1 | M16x1.5 |
Bore Diameter 1 | 18 mm |
Bore Diameter 2 | 23.1 mm |
Thread Type | with right-hand thread |
Function | Ball Joint |
Type | Ball Joint |
Mounting Type | Bolted |
Steering arm type | for control arm |
Important compatibility info
Function | Clutch Kit |
Hub Profile | 22.5 x 20.1 |
Engine Version | for engines with dual-mass flywheel |
Outer diameter | 215 mm |
Number of Parts | 2 -part |
Type | Clutch Kit |
Number of Teeth | 20 |
Replaces | HK2430 |
Important compatibility info
Housing Type | without housing |
Opening Temperature | 75 °C |
Additional Information | with gaskets/seals |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information
- 1x Borg & Beck Thermostat, coolant (BTS121.75)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5921 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6202 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6439)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 563 mm |
External Teeth, Wheel Side | 31 |
External Teeth, Diff.Side | 34 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6782 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8040)
- 1x Borg & Beck Fastening Bolt, control arm (BSK6974)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7312 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Rear |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 90 mm |
Inner diameter 2 | 76 mm |
Inner diameter 1 | 22 mm |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 78 mm |
Length | 92 mm |
Inner diameter 1 | 23 mm |
Type | Bellow Kit, drive shaft |
Replaces | BCB2186 |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 123 mm |
Inner diameter 2 | 92 mm |
Inner diameter 1 | 28 mm |
Material | Thermoplast |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 80 mm |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Inner diameter 1 | 27 mm |
Length | 102 mm |
Additional Information 2 | with clamps |
Important compatibility info
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 260 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6612 |
Important compatibility info
Thread Measurement 2 | M10X1.25 |
Thread Size | M10X1.25 |
Length | 250 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6863 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 72 mm |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Thread Measurement 2 | M12X1.5 |
Thread Size | M12X1.5 |
Length | 340 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Height | 46 mm |
Width | 52 mm |
Outer diameter | 13 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Length | 185 mm |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Important compatibility info
Length | 682 mm |
Function | Brake Hose |
Thread Type | with internal thread |
Type | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with banjo fitting |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Mounting Bolt Thread Size | M12x1 |
Important compatibility info
Thread Size | M20X1.5 |
Function | Nut, kingpin |
Type | Nut, kingpin |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Air Filter |
Width | 171 mm |
Length | 379 mm |
Type | Air Filter |
Height | 50 mm |
Filter type | Filter Insert |
Important compatibility info
Important compatibility info
Height | 175 mm |
Outer diameter | 85 mm |
Filter type | In-Line Filter |
Inlet Diameter | 8 mm |
Outlet Diameter | 8 mm |
Function | Fuel filter |
Type | Fuel filter |
Important compatibility info
Number of Teeth, ABS ring | 48 |
Seal Diameter | 72 mm |
Internal Teeth, wheel side | 27 |
External Teeth, Wheel Side | 40 |
Length | 116 mm |
Function | Joint Kit, drive shaft |
Additional Information 2 | with groove |
Type | Joint Kit, drive shaft |
Technical Information Number | Middle groove |
Thread Size | M10X1,5 |
Important compatibility info
Type | Joint Kit, drive shaft |
Thread Size | M22X1,5 |
Length | 146 mm |
External Teeth, Wheel Side | 26 |
Internal Teeth, wheel side | 26 |
Seal Diameter | 54 mm |
Technical Information Number | Middle groove |
Additional Information 2 | with groove |
Function | Joint Kit, drive shaft |
Important compatibility info
Height | 105 mm |
Outer diameter | 64 mm |
Inner diameter | 31 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Type | Oil Filter |
Important compatibility info
Function | Drive Shaft |
Length | 1140 mm |
Type | Drive Shaft |
External Teeth, Diff.Side | 41 |
External Teeth, Wheel Side | 35 |
Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1196)
Important compatibility info
Function | Drive Shaft |
External Teeth, Wheel Side | 35 |
External Teeth, Diff.Side | 41 |
Number of Teeth, ABS ring | 54 |
Length | 1085 mm |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023