Important compatibility info
Length | 898 mm |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Placement on Vehicle | Front Axle |
Type | Centre Rod Assembly |
Important compatibility info
Thread Measurement 2 | M10X1.25 |
Thread Size | M10X1.25 |
Length | 315 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 2 | M12X1.25 |
Thread Size | M12X1.25 |
Length | 122 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6886 |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Thread Measurement 2 | M10X1.25 |
Thread Size | M10X1.25 |
Length | 72 mm |
Rod/Strut | Suspension Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL7429 |
Placement on Vehicle | Rear Axle Right |
Important compatibility info
Length | 195 mm |
Width | 187 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Upper Right |
Important compatibility info
Inner diameter | 22.2 mm |
Material | Cast Iron |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Important compatibility info
Number of pads | 4 |
Wear Warning Contact | with acoustic wear warning |
Thickness/Strength 1 | 18.4 mm |
Number of wear indicators | 2 Per Axle |
Width 1 | 141.3 mm |
Height 2 | 63.3 mm |
Height 1 | 60.5 mm |
Brake System | Bosch |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Model | C-HR COROLLA |
Manufacturer | TOYOTA |
Important compatibility info
Length | 175 mm |
Height | 174 mm |
Width | 80 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Shape/Form | round |
Important compatibility info
Function | Air Filter |
Width | 174 mm |
Height | 42 mm |
Length | 303 mm |
Type | Air Filter |
Filter type | Filter Insert |
Important compatibility info
Important compatibility info
Function | Filter, cabin air |
Width | 187 mm |
Height | 38 mm |
Length | 260 mm |
Type | Filter, cabin air |
Filter type | Filter Insert |
Important compatibility info
Function | Fuel filter |
Outlet Diameter | 10 mm |
Inlet Diameter | 10 mm |
Height | 214 mm |
Type | Fuel filter |
Outer diameter | 95 mm |
Filter type | In-Line Filter |
Important compatibility info
Function | Oil Filter |
Filter type | Spin-on Filter |
Thread Size | M20X1.5 |
Height | 86 mm |
Additional Information 2 | with two anti-return valves |
Type | Oil Filter |
Outer diameter | 77 mm |
Inner diameter | 63 mm |
Valve type | Pressure Limiting Valve |
Important compatibility info
Length 1 | 1435 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Important compatibility info
Length | 137 mm |
Thread Size | M22X1.5 |
External Teeth, Wheel Side | 24 |
Technical Information Number | Middle groove |
Seal Diameter | 49.5 mm |
Internal Teeth, wheel side | 19 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information 2 | with groove |
Important compatibility info
Placement on Vehicle | Right Rear |
Length 1 | 1635 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Length 1 | 1703 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Number of pads | 4 |
Number of wear indicators | 2 Per Axle |
Width 1 | 148.6 mm |
Thickness/Strength 1 | 16.5 mm |
Height 1 | 60.9 mm |
Wear Warning Contact | not prepared for wear warning indicator |
Brake System | Advics |
Important compatibility info
External Teeth, Diff.Side | 27 |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Wheel Side | 30 |
Length | 605 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1200)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023