Important compatibility info
Additional Information 2 | with seal ring |
Weight | 0.6 kg |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.518 kg |
Placement on Vehicle | Front Axle Right |
Material | Steel |
Paired article numbers | 31971 |
Thread Type | with right-hand thread |
DIN / ISO | 985 |
Function | Tie Rod End |
Type | Tie Rod End |
External Thread Size | M10 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Steering arm type | Control Arm |
Paired article numbers | 107846 |
Weight | 3.3 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Cone Size | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (107843)
- 1x Febi Ball Joint (36051)
Important compatibility info
Internal Thread Size | M16 |
Function | Holder, Wheel Chock |
Type | Holder, Wheel Chock |
Weight | 0.156 kg |
Material | PA (polyamide) |
Length | 214.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.219 kg |
Placement on Vehicle | Front Axle |
Length | 141.63 mm |
Width | 50.6 mm. 50.8 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.7 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178104 |
Weight | 2.27 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (2 pistons) |
Paired article numbers | 179261 |
Weight | 4.567 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Weight | 0.72 kg |
Function | Air Filter |
Height | 360 mm |
Outer diameter | 146 mm |
Inner diameter | 87 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Weight | 1.018 kg |
Placement on Vehicle | Rear Axle |
Length | 101.9 mm |
Width | 50.2 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 28 mm |
Material | Metal |
Outer diameter | 59 mm |
Inner diameter | 8 mm |
Function | Deflection Pulley/Guide Pulley, timing belt |
Type | Deflection Pulley/Guide Pulley, timing belt |
Weight | 0.280 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Paired article numbers | 194041 |
Weight | 1.1 kg |
Type | Window Regulator |
Function | Window Regulator |
Number of Doors | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, V-ribbed belt |
Type | Belt Tensioner, v-ribbed belt |
Operating Mode | Automatic |
Weight | 3.115 kg |
Outer diameter | 65 mm |
Material | Metal |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M26 x 1,5 |
Weight | 0.08 kg |
Length | 28 mm |
Outer diameter | 33 mm |
Spanner Size | 17 |
Surface | Zinc-coated |
Thread Length | 13 mm |
Bolt Head/Nut Design | Male Hex |
Function | Screw Plug, oil sump |
Screw length below head | 16 mm |
Type | Screw Plug, oil sump |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw Plug, oil sump (19294)
- 1x Febi Seal Ring, oil drain plug (19422)
Important compatibility info
Weight | 0.42 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 215 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Additional Information | with nuts |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (26133)
- 2x Febi Nut (04512)
Important compatibility info
Function | Mount, exhaust system |
Weight | 0.033 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.291 kg |
Function | Air Filter |
Filter type | Filter Insert |
Width | 175 mm |
Length | 255 mm |
Type | Air Filter |
Height | 39 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 66 mm |
Thickness | 50 mm |
Inner diameter | 12 mm |
Weight | 0.252 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Weight | 0.906 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
for OE number | 21910-17000 |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.090 kg |
Cable Length | 400 mm |
Number of circuits | 3 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.771 kg |
Material | Cast Aluminium |
Number of Teeth | 19 |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
for OE number | 045 121 011 BX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023