Important compatibility info
| Function | Sensor, exhaust pressure |
| Type | Sensor, exhaust pressure |
| Number of Connectors / Ports | 3 |
| for OE number | 642 905 02 00 |
| Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front Axle Left, Wheel Side |
| Internal Teeth, wheel side | 21 |
| Seal Diameter | 52.5 mm |
| External Teeth, Wheel Side | 24 |
| Outer diameter | 75 mm |
| Length | 158 mm |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
Technical Information
Attention! Before installation, the number of teeth on the internal gear of the existing part and the new one must be compared. The number of teeth can vary on the originally factory-side installed part, and compatibility is only ensured if the numbers match.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 11 37 542 27R |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 171489 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2643 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bushing, leaf spring |
| Inner diameter | 24.4 mm |
| Function | Bushing, leaf spring |
| Length | 88 mm |
| Material | Rubber/Metal |
| Outer diameter | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 116 mm |
| Material | Rubber |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Thickness | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Protective Cap/Bellow, shock absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Protective Cap/Bellow, shock absorber |
| Material | PP (Polypropylene) |
| Length | 218 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with ball bearing |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 495 mm |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 14.4 mm |
| Thickness | 52 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Outer diameter | 51.9 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 47 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear, Rear Axle Left, Outer, Lower, Rear Axle Right |
| Type | Mounting, control/trailing arm |
| Thickness | 32 mm |
| Inner diameter | 12.6 mm |
| Additional Information 2 | Requires special tools for mounting |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 33 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Thickness | 42 mm |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower, Front |
| Paired article numbers | 177101 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left, Upper |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, differential |
| Type | Mounting, differential |
| Inner diameter | 12 mm |
| Thickness | 60 mm |
| Outer diameter | 58 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Paired article numbers | 177134 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (175380)
- 1x Febi Ball Joint (40666)
- 1x Febi Nut (39159)
- 3x Febi Nut, ball joint (36734)
- 2x Febi Fastening Bolt, control arm (173406)
- 1x Febi Nut (103239)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















