Important compatibility info
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
| Operating Mode | Automatic |
| Placement on Vehicle | both sides |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Thread Size | M30x1,5 |
| Min. Length | 720 mm |
| ABS Ring Diameter | 114 mm |
| Wheel Sided Joint Diameter | 98.1 mm |
| Type | Drive Shaft |
| Transmission-side joint diameter | 89.1 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 138 mm |
| Length | 344 mm |
| Function | Suspension Spring |
| Number of Coils | 5.2 |
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 330 mm |
| Outer diameter | 140 mm |
| Type | Suspension Spring |
| Number of Coils | 5.3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 310 mm |
| Outer diameter | 137 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Number of Coils | 8.3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, boost pressure / Sensor, intake air temperature |
| Number of Connectors / Ports | 2. 3 |
| for OE number | 2 131 818 |
| Type | Sensor, boost pressure / Sensor, intake air temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1190 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1212 mm |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 181347 |
| Length | 507 mm |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023








