Important compatibility info
Weight | 0.65 kg |
Additional Information | with nuts, with drive shaft bolt |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37 mm |
Outer diameter | 82 mm |
Inner diameter | 43 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (05918)
- 1x Febi Screw (05919)
- 1x Febi Clamping Bolt, ball joint (03973)
- 1x Febi Nut (04504)
- 1x Febi Nut (05360)
- 1x Febi Nut (05359)
Important compatibility info
Width | 40 mm |
Outer diameter | 63 mm |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Weight | 0.514 kg |
Number of Ribs | 6 |
Additional Information 2 | with lid |
Inner diameter | 17 mm |
Placement on Vehicle | engine sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 245 mm |
Material | PTFE (polytetrafluoroethylene) |
Thickness | 34.5 mm |
Function | Shaft Seal, automatic transmission |
Weight | 0.2 kg |
Inner diameter | 48 mm |
Type | Shaft Seal, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 369.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 18 mm |
Stroke | 172 mm |
Eject Force | 540 N |
Housing Diameter | 18 mm |
Weight | 0.3 kg |
Length | 661 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 59 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Weight | 3.2 kg |
Inner diameter | 30 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Outer diameter | 69 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 19 mm |
Weight | 0.068 kg |
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.178 kg |
Material | Thermoplast |
Function | Bellow Kit, steering |
Inner diameter 2 | 67 mm |
Length | 247 mm |
Type | Bellow Kit, steering |
Inner diameter 1 | 14 mm |
Additional Information | with grease |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38764)
- 1x Febi Fastening Clamp (06584)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Bellow, steering (36516)
Important compatibility info
Weight | 0.230 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 225 mm |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (36791)
- 2x Febi Nut (22263)
Important compatibility info
Weight | 0.22 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 66 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Surface | Zinc-coated |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25, M10 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 253 |
Belts | with rounded tooth profile |
Function | Timing Belt |
Weight | 0.28 kg |
Type | Timing Belt |
Width | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Inner diameter | 17 mm |
Function | Repair Kit, stabiliser bush |
Extra Description | ProKit |
Weight | 0.583 kg |
Type | Repair Kit, stabiliser bush |
Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (27640)
- 1x Febi Bracket, stabiliser mounting (37145)
- 4x Febi Screw (37063)
- 2x Febi Link/Coupling Rod, stabiliser bar (19518)
- 1x Febi Bracket, stabiliser mounting (37146)
Important compatibility info
Additional Information 2 | with fastening material |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 1.298 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (11153)
- 2x Febi Mounting, control/trailing arm (11152)
- 1x Febi Bolt, control arm (11154)
- 2x Febi Washer (10357)
- 1x Febi Nut, exhaust manifold (01554)
- 3x Febi Nut (06877)
- 1x Febi Spacer Sleeve (10360)
Important compatibility info
Filter type | In-Line Filter, with water drain screw |
Weight | 0.365 kg |
Function | Fuel filter |
Pipe Diameter | 8 mm |
Type | Fuel filter |
Outer diameter | 80 mm |
Material | Paper |
Height | 167 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.970 kg |
Placement on Vehicle | Right |
Paired article numbers | 22932 |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Material | Rubber/Metal |
Outer diameter | 76 mm |
Thickness | 50 mm |
Inner diameter | 43 mm |
Weight | 0.512 kg |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 330 mm |
Thickness | 76 mm |
Brake Disc Thickness | 32 mm |
Minimum thickness | 30 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rotor Style | perforated/vented |
Weight | 10.1 kg |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 404 mm |
Weight | 0.244 kg |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 220.5 mm |
Stroke | 160 mm |
Eject Force | 200 N |
Housing Diameter | 19 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.066 kg |
Valve type | Pressure Limiting Valve |
Extra Description | febi Plus |
Function | Pressure Control Valve, common rail system |
Type | Pressure Control Valve, common rail system |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Front, both sides |
Weight | 1.114 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023