Important compatibility info
Placement on Vehicle | transmission sided, Front Axle Right |
Length | 100 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 72 mm |
Weight | 0.170 kg |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (192873)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 2.268 kg |
Additional Information 2 | without integrated oil separator, with seal ring |
Function | Air Dryer Cartridge, compressed-air system |
Outer diameter | 136 mm |
Thickness | 135 mm |
Thread Type | with right-hand thread |
Internal Thread Size | M41 x 1,5 |
Type | Air Dryer Cartridge, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Material | Rubber |
Weight | 0.101 kg |
Type | Mount, exhaust system |
Function | Mount, exhaust system |
Hole Spacing | 43.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Weight | 0.800 kg |
Width of castor bearing surface | 19 mm |
Track rollers material | Metal |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Placement on Vehicle | both sides, Lower |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Type | Roller Guide, sliding door |
Paired article numbers | 183087 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.026 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 215 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 79 °C |
Heating / Cooling | with vent hole |
Weight | 0.113 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (24643)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Length | 612 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Push Rod |
Pipe Diameter | 48 mm |
Mounting points diameter | 20 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Weight | 0.42 kg |
Width of castor bearing surface | 32 mm |
Outer diameter | 90 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with cap, with screw |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | 1" - 12 UNF |
Gasket outer diameter | 72 mm |
Gasket inner diameter | 62 mm |
Function | Oil Filter |
Type | Oil Filter |
Filter type | Spin-on Filter |
Weight | 0.742 kg |
Outer diameter | 95 mm |
Height | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Length | 223 mm |
Height | 20 mm |
Width | 150 mm |
Filter type | Pollen Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Seal, automatic transmission |
Weight | 0.010 kg |
Type | Oil Seal, automatic transmission |
Transmission Type | CVT automatic transmission (stepless) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.2 kg |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Placement on Vehicle | before catalytic converter |
Number of Connectors / Ports | 2 |
Weight | 0.050 kg |
Cable Length | 307 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.090 kg |
Placement on Vehicle | Front Axle Left |
Length | 650 mm |
Paired article numbers | 109064 |
Number of Connectors / Ports | 2 |
Cable Length | 583 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 33 mm |
Material | Rubber |
Inner diameter | 17 mm |
Placement on Vehicle | Front Axle |
Weight | 0.026 kg |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Chain Type | Simplex, Closed chain |
Weight | 0.814 kg |
Type | Timing Chain Kit |
Number of Chain Links | 134 |
for OE number | 13506-37050 S1 |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (179670)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (109450)
- 1x Febi Guide, timing chain (174609)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 185998 |
Weight | 7.8 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 31 mm. 27 mm |
Colour | Black |
Inner diameter | 21 mm. 18 mm |
Function | Radiator Hose |
Weight | 0.210 kg |
Hose Length | 490 mm |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Weight | 1.210 kg |
for OE number | 22 11 6 775 905 |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023