Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 200 mm |
| Material | Thermoplastic polyester elastomer |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 15 mm |
| Inner diameter 2 | 51 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Exterior Mirror |
| Length | 73 mm |
| Width | 154 mm |
| Thickness | 27 mm |
| Paired article numbers | 199873 |
| Outer/Inner Mirror | Unheated |
| Type | Mirror Glass, wide angle mirror |
| Camber Radius | 300 mm |
| Function | Mirror Glass, wide angle mirror |
| Manufacturer | Mekra Lang |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Voltage | 12 V |
| Operating Mode | Electric |
| Paired article numbers | 199877 |
| Outer/Inner Mirror | Heatable, Short mirror arm |
| Type | Exterior Mirror |
| Function | Exterior Mirror |
| Manufacturer | Mekra Lang |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Width | 7 mm |
| Outer diameter | 62 mm |
| Inner diameter | 42 mm |
| Type | Shaft Seal |
| Function | Shaft Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| for OE number | 22 11 6 860 463 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| for OE number | 22 11 6 860 464 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 88 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Additional Information | with crown nut and split pin, with rubber mounts |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 1000082 |
| Cone Size | 12.8 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 15.5 mm |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (36723)
- 2x Febi Protective Cap/Bellow, shock absorber (36604)
Important compatibility info
| Length | 314 mm |
| Width | 55 mm |
| Thickness | 25 mm |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Extra Description | febi Plus |
| Hole Spacing | 183 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Height | 146 mm |
| Width | 550 mm |
| Inspection Tag | ADR |
| Paired article numbers | 1001016 |
| Port / Connector type | ASS2 7 Pin, 4 x 2 Pin ASS2 |
| Light Function | with indicator (LED), with stop light (LED), with reverse light (LED), with rear fog light (LED), with taillight (LED), with position light (LED), with reflector (triangular), without licence plate light |
| Depth | 47 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R23, R38, R91, R3, R6, R7, R10 |
| Function | Tail Light Assembly |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Height | 146 mm |
| Width | 550 mm |
| Inspection Tag | ADR |
| Paired article numbers | 1001015 |
| Port / Connector type | ASS2 7 Pin, 4 x 2 Pin ASS2 |
| Light Function | with indicator (LED), with stop light (LED), with reverse light (LED), with rear fog light (LED), with taillight (LED), with position light (LED), with reflector (triangular), without licence plate light |
| Depth | 47 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R23, R38, R91, R3, R6, R7, R10 |
| Function | Tail Light Assembly |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Height | 140 mm |
| Width | 570 mm |
| Voltage | 24 V |
| Paired article numbers | 1001018 |
| Port / Connector type | ASS2 7 Pin, 4 x ASS2 2 Pin |
| Number of Connectors / Ports | 15 |
| Light Function | with indicator (LED), with rear fog light (LED), with taillight (LED), with stop light (LED), with reverse light (LED), with reflector (triangular), with position light (LED), without licence plate light |
| Depth | 45 mm |
| Protection Type (IP Code) | IP6K9K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R150, R10 |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Tail Light Assembly |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Height | 140 mm |
| Width | 570 mm |
| Voltage | 24 V |
| Paired article numbers | 1001017 |
| Port / Connector type | ASS2 7 Pin, 4 x ASS2 2 Pin |
| Number of Connectors / Ports | 15 |
| Light Function | with indicator (LED), with rear fog light (LED), with taillight (LED), with stop light (LED), with reverse light (LED), with reflector (triangular), with position light (LED), without licence plate light |
| Depth | 45 mm |
| Protection Type (IP Code) | IP6K9K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R150, R10 |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Tail Light Assembly |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Height | 146 mm |
| Width | 360 mm |
| Inspection Tag | ADR |
| Paired article numbers | 1001021 |
| Port / Connector type | ASS2 7 Pin |
| Light Function | with indicator (LED), with stop light (LED), with reverse light (LED), with rear fog light (LED), with taillight (LED), with reflector (triangular), without licence plate light |
| Depth | 47 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R23, R38, R3, R6, R7, R10 |
| Function | Tail Light Assembly |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Inspection Tag | ADR |
| Paired article numbers | 1001020 |
| Port / Connector type | ASS2 7 Pin |
| Light Function | with indicator (LED), with stop light (LED), with reverse light (LED), with rear fog light (LED), with taillight (LED), with reflector (triangular), without licence plate light |
| Depth | 47 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R23, R38, R3, R6, R7, R10 |
| Function | Tail Light Assembly |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Height | 140 mm |
| Width | 380 mm |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Port / Connector type | ASS2 7 Pin |
| Number of Connectors / Ports | 7 |
| Light Function | with indicator (LED), with rear fog light (LED), with taillight (LED), with stop light (LED), with reverse light (LED), with reflector (triangular), without licence plate light |
| Depth | 45 mm |
| Protection Type (IP Code) | IP6K9K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R150, R10 |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Tail Light Assembly |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Inspection Tag | ADR Zone 2 |
| Paired article numbers | 1001071 |
| Port / Connector type | ASS2 2 Pin |
| Mounting bores distance | 78 mm |
| Cable Length | 2000 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Inspection Tag | ADR Zone 2 |
| Paired article numbers | 1001070 |
| Port / Connector type | ASS2 2 Pin |
| Mounting bores distance | 78 mm |
| Cable Length | 2000 mm |
| Voltage from | 10 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 132 mm |
| Outer diameter | 132 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 12 |
| Rated Power | 7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 8 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 130 A |
| Belt Pulley Diameter | 73 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 9 |
| Rated Power | 6.6 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 11 |
| Rated Power | 7.0 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.2 kW |
| for OE number | 02Z 911 024 HX |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Vehicle Equipment | for vehicles without start-stop function |
| Pulleys | with belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Upper |
| Material | Rubber/Metal |
| Outer diameter | 70.8 mm |
| Thickness | 70 mm |
| Inner diameter | 12.5 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 168 mm |
| Material | Thermoplastic polyester elastomer |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 17 mm |
| Inner diameter 2 | 53 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Belt Pulley Diameter | 119 mm |
| Refrigerant | R 134a |
| Compressor ID | SD7V12 |
| Oil Fill Quantity | 115 ml |
| Number of grooves | 5 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 119 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 125 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 33 |
| External Teeth, Diff.Side | 34 |
| Min. Length | 573 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 91.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 35 |
| External Teeth, Diff.Side | 34 |
| Min. Length | 502 mm |
| Wheel Sided Joint Diameter | 81.9 mm |
| Transmission-side joint diameter | 78 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Belt Pulley Diameter | 120 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 200 ml |
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without magnetic clutch |
| Voltage | 12 V |
| Belt Pulley Diameter | 110 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 160 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Belt Pulley Diameter | 110 mm |
| Refrigerant | R 134a |
| Compressor ID | 7SEU17C |
| Oil Fill Quantity | 180 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Rim Hole Number | 4 -Hole |
| Centering Diameter | 56 mm |
| Surface | Oiled |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 244 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 9 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
| Additional Information 2 | with wheel bearing, with ABS sensor ring |
| Sensor Type | Impulse Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 133 mm |
| Outer diameter | 58 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 15 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 69.5 mm |
| Gasket inner diameter | 62.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Filter |
| Gasket outer diameter | 80.7 mm |
| Gasket inner diameter | 73.5 mm |
| Inner diameter | 26 mm |
| Filter type | Filter Insert |
| Outer diameter | 65 mm |
| Type | Oil Filter |
| Additional Information | with gasket/seal, with fastening/mounting material |
| Height | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 150 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Height | 57 mm |
| Length | 255 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1030 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air Filter |
| Filter type | Filter Insert |
| Outer diameter | 168 mm |
| Inner diameter | 120 mm |
| Function | Air Filter |
| Height | 123 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 250 mm |
| Type | Air Filter |
| Function | Air Filter |
| Height | 57 mm |
| Width | 210 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 218 mm |
| Height | 68 mm |
| Length | 279 mm |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 30 mm |
| Width | 206 mm |
| Filter type | Pollen Filter |
| Function | Filter Set, cabin air |
| Length | 245 mm |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 8 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1852 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























