Important compatibility info
Housing Type | without housing |
Weight | 0.05 kg |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-film Sensor |
Type | Mass Air Flow Sensor |
Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.469 kg |
Placement on Vehicle | Right Rear |
Length | 1877 mm |
Paired article numbers | 36673 |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information | with accessories |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Silver |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Length | 113 mm |
Spanner Size | 17 |
Paired article numbers | 48032 |
Weight | 0.438 kg |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Min. Length | 339 mm |
Weight | 3.580 kg |
External Thread Size | M12 x 1,25 |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Pipe Diameter | 51 mm |
Piston conrod diameter | 22 mm |
Function | Shock Absorber |
Shock Absorber Design | Suspension Strut |
Max. Length | 518 mm |
Paired article numbers | 193112 |
Placement on Vehicle | Front Axle Right |
Mounting points diameter | 13 mm |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fitting, intake manifold |
Type | Fitting, intake manifold |
Weight | 2.0310 kg |
Additional Information | with gasket/seal, without adjusting element |
Colour | Black |
Material | Plastic |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fitting, intake manifold (181564)
- 1x Febi Gasket, intake manifold (182287)
- 1x Febi Gasket, intake manifold housing (182288)
Important compatibility info
Placement on Vehicle | Right |
Material | Metal |
Outer diameter | 60 mm |
Inner diameter | 17 mm |
Weight | 0.243 kg |
Number of grooves | 6 |
Mounting points diameter | 17 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Diameter | 18 mm |
Stroke | 231 mm |
Eject Force | 420 N |
Type | Gas Spring, boot/cargo area |
Weight | 0.2 kg |
Placement on Vehicle | both sides |
Length | 604 mm |
Piston conrod diameter | 8 mm |
Mounting points diameter | 18 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 327 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 0.21 kg |
Material | FVMQ [fluorosilicone rubber), Plastic |
Function | Valve, crankcase ventilation |
Type | Valve, crankcase ventilation |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Centre, Lower |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 104 |
Timing Chain Size | G68V-2 |
Function | Chain, oil pump drive |
Weight | 0.44 kg |
Additional Information 2 | Requires special tools for mounting |
Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.591 kg |
Material | Plastic |
Colour | Black |
Function | Expansion Tank, coolant |
Number of Connectors / Ports | 2 |
Type | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Additional Information 2 | without lid |
for OE number | 17 13 8 616 418 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M16 x 1,5 |
Weight | 3.231 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 156 mm |
Outer diameter | 156 mm |
Inner diameter | 38 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 130 mm |
Machining | High-carbon |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.63 kg |
Number of Connectors / Ports | 5 |
Function | EGR Module |
Type | EGR Module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Outlet |
Height | 6.5 mm. 8.1 mm |
Material | HNBR (hydrogenated nitrile butadiene rubber) |
Weight | 0.04 kg |
Type | Shaft Seal, manual transmission |
Function | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Driver side |
Number of Connectors / Ports | 17 |
Weight | 0.114 kg |
for OE number | 005 545 24 13 |
Combi Switch Function | Mirror Adjustment, Window Regulator, Safety Switch, Heated wing mirror on/off |
Type | Multi-Function Switch |
Function | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.23 kg |
Placement on Vehicle | Lower, Front Axle |
Inner diameter | 12 mm |
Length | 52.5 mm |
Width | 43 mm |
Material | Rubber/Metal |
Outer diameter | 42.5 mm |
Thickness | 53 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.252 kg |
Placement on Vehicle | Lower Front Axle |
Outer diameter | 70 mm. 50 mm |
Thickness | 48 mm |
Inner diameter | 20 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Length | 71 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rubber Buffer, suspension |
Width | 57 mm |
Material | PU (Polyurethane) |
Placement on Vehicle | Front Axle |
Weight | 0.05 kg |
Length | 60 mm |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided |
Width | 9 mm |
Outer diameter | 114 mm |
Inner diameter | 96 mm |
Function | Shaft Seal, crankshaft |
Weight | 0.041 kg |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.093 kg |
for OE number | 51.03905.0204 |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023