Important compatibility info
Weight | 4.57 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Left Front, Lower |
Material | Cast Steel |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 40604 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36837)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
Important compatibility info
Spanner Size | 22 |
Weight | 0.097 kg |
for OE number | 06A 906 262 AH |
Cable Length | 580 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Weight | 0.21 kg |
Additional Information 2 | with seal ring |
Opening Temperature | 87 °C |
Outer diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Outer diameter | 40 mm |
Inner diameter | 24.9 mm |
Function | Shaft Seal, automatic transmission |
Type | Shaft Seal, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 65 mm |
Outer diameter | 82 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Bolt Hole Circle Diameter | 114 mm |
Function | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
for OE number | 13591999 |
Weight | 4.019 kg |
Outer diameter 2 | 146 mm |
Outer diameter 1 | 70.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 87 mm |
Outer diameter | 68 mm |
Filter type | Spin-on Filter |
Internal Thread Size | 3/4" - 16 UNF |
Function | Oil Filter |
Seal Diameter | 61.5 mm |
Weight | 0.229 kg |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 14 mm |
Function | Mounting, stabiliser bar |
Weight | 0.04 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Pipe Diameter | 54 mm |
Max. Length | 430 mm |
Type | Shock Absorber, driver cab suspension |
Operating Mode | Pneumatic |
Weight | 3.8 kg |
Min. Length | 335 mm |
Mounting points diameter | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.15 kg |
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inspection Tag | ECE R90 Approved |
Function | Brake Shoe Set, parking brake |
Additional Information | with fastening/mounting material |
Weight | 1.26 kg |
Outer diameter | 180 mm |
Placement on Vehicle | Rear Axle |
Width | 25 mm |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Capacity | 10 l |
Type | Binding Agent |
Weight | 1.8 kg |
Function | Binding Agent |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.40 kg |
Placement on Vehicle | both sides |
Length | 271 mm |
Width | 180 mm |
Thickness | 227 mm |
Thread Length | 56 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
External Thread Size | M14 x 2 |
Internal Thread Size | M16 x 2 |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.52 kg |
Placement on Vehicle | Upper Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
for OE number | 82 00 404 271 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.39 kg |
Number of Teeth | 87 |
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Water pump impeller material | Metal |
Units / Pulleys | incl. tensioner pulley |
Width | 17 mm |
Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21249)
- 1x Febi Water Pump, engine cooling (39298)
Important compatibility info
Weight | 0.257 kg |
Placement on Vehicle | transmission sided |
Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
Outer diameter | 191 mm |
Thickness | 16 mm |
Inner diameter | 165 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.444 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
Cooling Hose | from thermostat to radiator |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Hose Length | 300 mm |
for OE number | 17 12 7 536 230 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 16 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Weight | 0.134 kg |
for OE number | 82 00 459 153 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 10 mm |
Rod/Strut | Coupling Rod |
Material | Steel |
Length | 151 mm |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M12 x 1,25, M10 x 1,25 |
Weight | 0.27 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Set, cylinder head cover |
Material | ACM (Polyacrylate) |
Paired article numbers | 34796 |
Placement on Vehicle | Right |
Weight | 0.185 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.14 kg |
Placement on Vehicle | Rear |
Length | 205 mm |
Width | 18 mm |
Outer diameter | 86 mm |
Thickness | 125 mm |
Inner diameter | 40 mm. 82 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023