Important compatibility info
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 44 |
Weight | 1.950 kg |
Internal Teeth, wheel side | 22 |
Seal Diameter | 52.5 mm |
External Teeth, Wheel Side | 25 |
Outer diameter | 79 mm |
Length | 153 mm |
Placement on Vehicle | Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 26 mm |
Rotation Direction | Clockwise rotation |
Number of Connectors / Ports | 2 |
Weight | 5.590 kg |
Type | Hydraulic Pump, steering |
Operating pressure to | 18.5 bar |
Function | Hydraulic Pump, steering |
Extra Description | febi Plus |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
for OE number | 010 153 53 28 |
Weight | 0.044 kg |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Weight | 0.455 kg |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Core Length | 80 mm |
Core Width | 80 mm |
Core Depth | 42 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Cone Size | 17 mm |
Paired article numbers | 175415 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 18 mm |
Placement on Vehicle | Rear Axle |
Weight | 0.020 kg |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Cooler, exhaust gas recirculation |
Weight | 2.184 kg |
Type | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.125 kg |
Placement on Vehicle | Front Axle |
Length | 60.3 mm |
Width | 53 mm |
Material | Rubber |
Inner diameter | 25.5 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle |
Function | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Seal Material | Paper |
Type | Suspension Strut Support Mount |
Weight | 0.24 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (04584)
- 1x Febi Seal, suspension strut support mount (12701)
Important compatibility info
Weight | 0.737 kg |
Placement on Vehicle | Front Axle |
Length | 205 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Link/Coupling Rod, stabiliser bar (12002)
- 4x Febi Nut, stabiliser bar (24861)
Important compatibility info
Weight | 1.19 kg |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 32627 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (26045)
- 1x Febi Tie Rod End (26097)
Important compatibility info
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 16.9 mm. 16.5 mm |
Additional Information | with retaining spring holder |
Type | Brake Pad Set, disc brake |
Weight | 1.043 kg |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle |
Wear Warning Contact | with acoustic wear warning |
Length | 113.4 mm |
Width | 47.6 mm |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 23418 |
Length | 100 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle |
Weight | 0.080 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.567 kg |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Number of Teeth | 122. 77 |
Units / Pulleys | incl. tensioner pulley |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
- 1x Febi Timing Belt (12667)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178794)
Important compatibility info
Length | 51.5 mm |
Outer diameter | 31 mm |
Weight | 0.119 kg |
Function | Centering Sleeve, propshaft |
Type | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 70 mm |
Number of Ribs | 6 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 33 mm |
Weight | 0.1 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Housing length | 192 mm |
Mounting points diameter | 18 mm |
Placement on Vehicle | both sides |
Length | 333 mm |
Eject Force | 650 N |
Stroke | 117 mm |
Housing Diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 555 N |
Stroke | 166 mm |
Weight | 0.3 kg |
Placement on Vehicle | both sides |
Length | 448 mm |
Housing length | 246.5 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Housing Diameter | 19 mm |
Mounting points diameter | 16.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.025 kg |
Length | 155.2 mm |
Width | 66 mm. 71.4 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1600 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Weight | 0.163 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023