Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Plug |
| Cross Section | 4 mm² |
| Type | Plug |
| Cable Length | 250 mm |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | with plug |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.47
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Length | 149 mm |
| Width | 18 mm |
| Outer diameter | 72 mm. 57 mm |
| Thickness | 65 mm |
| Inner diameter | 22 mm. 21 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.61
Important compatibility info
| Length | 68 mm |
| Outer diameter | 18 mm |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| Number of Teeth | 19 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 045 121 011 BX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.56
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.96
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Shape/Form | Oval |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.90
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 74 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Bolt Hole Circle Diameter | 108 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter 1 | 63 mm |
| Outer diameter 2 | 136 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.11
Important compatibility info
| Replaces | 22043 |
| Placement on Vehicle | Rear Axle, Front |
| Function | Bush Set, axle beam |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22039)
- 2x Febi Bushing, axle cross member (06668)
- 2x Febi Repair Kit, axle beam (22045)
£58.61
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36328 |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 14 mm |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (34175)
- 1x Febi Mounting, control/trailing arm (34176)
- 1x Febi Nut (36331)
£75.91
Important compatibility info
| Width of castor bearing surface | 27.5 mm |
| Outer diameter | 76 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.28
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Function | Mount, exhaust system |
| Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.13
Important compatibility info
| Outer diameter | 69 mm |
| Material | Plastic |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.84
Important compatibility info
| Outer diameter | 75.5 mm |
| Material | Plastic |
| Additional Information 2 | with top, with screw |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.89
Important compatibility info
| Additional Information 2 | with screw |
| Width | 36 mm |
| Outer diameter | 155 mm |
| Inner diameter | 26 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (36154)
- 1x Febi Pulley Bolt (30153)
£59.66
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| Spanner Size | 22 |
| External Thread Size | M12 x 1,5 |
| Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.83
Important compatibility info
| Width of castor bearing surface | 32 mm |
| Material | Plastic |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 74 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 1 510 697 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.97
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 35 mm. 44 mm |
| Material | Rubber/Metal |
| Outer diameter | 64 mm. 38 mm |
| Inner diameter | 24 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.86
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 600 mm |
| Housing Diameter | 19 mm |
| Eject Force | 385 N |
| Stroke | 239 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 321.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.35
Important compatibility info
| Width | 41 mm |
| Outer diameter | 84 mm |
| Function | Wheel Bearing Kit |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Additional Information | with axle nut |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (39827)
- 1x Febi Circlip (03405)
- 1x Febi Axle Nut, drive shaft (01701)
£24.40
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Paired article numbers | 40096 |
| Placement on Vehicle | Left Front |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.45
Important compatibility info
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.34
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Function | Repair Kit, suspension strut support mount |
| Internal Thread Size | M8 x 1,25 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Replaces | 38309 |
Additional Information
Technical Information
Vehicles can be equipped with different suspension strut mount differing in terms of quantity of fitting holes (3 or 6) and thread (M8 or M10). Please identify the fitted product for comparison. More information in the attached technical bulletin.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.36
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.19
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 48.3 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 65 mm |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.84
Important compatibility info
| Material | Plastic |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 86 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Timing Chain Size | G53HS-8, G53HS-7 |
| Placement on Vehicle | Upper |
| for OE number | 11 31 8 590 950 S4 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Guide, timing chain (105979)
£85.84
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| External Thread Size | 1/4 " 18 NPT, 1/2 " 13 UNC, 3/8 " 16 UNC |
| Outer diameter | 160 mm |
| Thickness | 352 mm. 165 mm |
| Type | Bellow, air suspension |
| Rolling piston material | Plastic |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.62
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 295 mm |
| Thickness | 42.6 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.3 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.86
Important compatibility info
| Cable Length | 280 mm |
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.16
Important compatibility info
| Height | 80 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information | with fastening/mounting material |
| Gasket outer diameter | 113.5 mm |
| Gasket inner diameter | 105.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.27
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023