Important compatibility info
Weight | 0.070 kg |
Placement on Vehicle | Rear Axle |
Inner diameter | 15 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle, Rear Axle |
Height | 151 mm |
Outer diameter | 27 mm. 75 mm. 92 mm. 100 mm. 108 mm. 116 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Weight | 0.23 kg |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 64 |
Timing Chain Size | G53HP, G53HR |
Function | Chain, oil pump drive |
Additional Information 2 | Requires special tools for mounting |
Type | Chain, oil pump drive |
Weight | 0.176 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.31 kg |
Material | Aluminium |
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Function | Heat Exchanger, interior heating |
Additional Information | with gasket/seal |
Weight | 0.575 kg |
Type | Heat Exchanger, interior heating |
Core Length | 185 mm |
Core Width | 175 mm |
Core Depth | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Weight | 0.008 kg |
Thickness | 73 mm |
Function | Fastening Clamp, charge air hose |
Type | Fastening Clamp, charge air hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Colour | Black |
Function | Valve, crankcase ventilation |
Extra Description | febi Plus |
Additional Information 2 | with bolts/screws |
Weight | 0.330 kg |
Type | Valve, crankcase ventilation |
Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (47725)
- 1x Febi Gasket, crankcase ventilation (44481)
- 1x Febi Hose, cylinder head cover ventilation (100463)
- 1x Febi Hose, cylinder head cover ventilation (100659)
- 4x Febi Screw (107188)
Important compatibility info
Function | Housing, oil filter |
Extra Description | febi Plus |
Type | Housing, oil filter |
Additional Information | with gasket/seal, with oil filter |
Weight | 1.150 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Placement on Vehicle | frontal sided |
Material | Metal |
Type | Housing Cover, crankcase |
Sealing lip material | PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) |
Function | Housing Cover, crankcase |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 245 mm |
Material | PTFE (polytetrafluoroethylene) |
Thickness | 34.5 mm |
Function | Shaft Seal, automatic transmission |
Weight | 0.2 kg |
Inner diameter | 48 mm |
Type | Shaft Seal, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.235 kg |
Material | Metal |
Thickness | 1 mm |
Function | Gasket, cylinder head |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Low Pressure Side |
for OE number | 06E 906 051 K |
External Thread Size | M10 x 1 |
Number of Connectors / Ports | 3 |
Function | Sensor, fuel pressure |
Weight | 0.020 kg |
Type | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.77 kg |
Placement on Vehicle | Rear Axle Left, Lower, Front, Rear Axle Right |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 1.1 kW |
Weight | 4.0 kg |
for OE number | 02M 911 023 G |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Placement on Vehicle | Front Axle |
Material | PU (Polyurethane) |
Thickness | 65 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Inner diameter | 85 mm |
Thickness | 15.7 mm |
Outer diameter | 131 mm. 152 mm |
Material | PTFE (polytetrafluoroethylene) |
Placement on Vehicle | transmission sided |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Guide, timing chain |
Weight | 0.006 kg |
Placement on Vehicle | Upper |
Material | Plastic |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Colour Coding | Grey |
Additional Information | with retaining spring, with gasket/seal |
Function | Sensor, coolant temperature |
Screw length below head | 20 mm |
Weight | 0.015 kg |
Type | Sensor, coolant temperature |
Replaces | 33911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.020 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32956 |
Placement on Vehicle | Rear Axle Right, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Weight | 0.08 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 190 mm |
Function | Bellow Kit, steering |
Material | Thermoplast |
Type | Bellow Kit, steering |
Inner diameter 1 | 16 mm |
Inner diameter 2 | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (31054)
- 1x Febi Clamping Clip (38762)
- 1x Febi Clamping Clip (38756)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023