Important compatibility info
Length | 300 mm |
Height | 29 mm |
Width | 205 mm |
Function | Filter, cabin air |
Paired article numbers | BFC1111 |
Type | Filter, cabin air |
Filter type | Particulate Filter |
Important compatibility info
Distance of fastening bolts | 125 mm |
Function | Suspension Strut Support Mount |
Additional Information 2 | without bearing |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5500 |
Height | 77 mm |
Important compatibility info
Height | 62 mm |
Outer diameter | 65 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Type | Oil Filter |
Inner diameter 1 | 32 mm |
Inner diameter 2 | 32 mm |
Important compatibility info
Width | 20 mm |
Quantity | 5 |
Diameter From | 43 mm |
Diameter To | 47 mm |
Function | Fastening Clamp, charge air hose |
Type | Fastening Clamp, charge air hose |
Important compatibility info
Length 1 | 1840 mm |
Function | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Type | Cable Pull, parking brake |
Important compatibility info
Length 1 | 1613 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Length 3 | 1221 mm |
Length 4 | 900 mm |
Length 2 | 850 mm |
Function | Cable Pull, manual transmission |
Length 1 | 1105 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Length 1 | 1588 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Important compatibility info
Inner diameter | 60 mm |
Height | 51 mm |
Outer diameter | 126 mm |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
External Teeth, Diff.Side | 22 |
External Teeth, Wheel Side | 22 |
Length | 649 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Important compatibility info
External Teeth, Diff.Side | 25 |
Number of Teeth, ABS ring | 48 |
External Teeth, Wheel Side | 25 |
Length | 685 mm |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Important compatibility info
Length 1 | 1440 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Important compatibility info
Placement on Vehicle | Right Rear |
Length 1 | 1797 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Length 1 | 1490 mm |
Length 2 | 1142 mm |
Important compatibility info
Function | Cap, coolant tank |
Type | Cap, coolant tank |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Thermoplast |
Length | 195 mm |
Inner diameter 1 | 17 mm |
Inner diameter 2 | 52 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Important compatibility info
Function | Bump Stop, steering knuckle |
Type | Bump Stop, steering knuckle |
Placement on Vehicle | Rear Axle, Left, Right |
Important compatibility info
Axle Joint Length | 299 mm |
Length | 298.5 mm |
Thread Measurement 1 | M16x1.5 |
Thread Measurement 2 | M16x1.5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Length | 56 mm |
Thread Measurement 1 | M10x1.5 |
Function | Fastening Bolt, control arm |
Type | Fastening Bolt, control arm |
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Rear Axle |
Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
Function | Bushing, axle beam |
Material | Plastic |
Type | Bushing, axle beam |
Important compatibility info
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5403 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 1.1 kW |
Number of mounting bores | 3 |
Function | Starter |
Type | Starter |
Important compatibility info
Inner diameter 1 | 50 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Colour | Black |
Inner diameter 2 | 50 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Function | Charge Air Hose |
Colour | Black |
Inner diameter 2 | 45 mm |
Type | Charge Air Hose |
Inner diameter 1 | 59 mm |
Material | Polychloroprene (Neoprene) |
Important compatibility info
Function | Tie Rod |
Pipe Diameter | 40 mm |
Adjustable | Adjustable |
Length | 1515 mm |
Type | Tie Rod |
for OE number | 9753300803 |
Thread Size | M24x1.5 RHT |
Important compatibility info
Axle Joint Thread Type | with right-hand thread, with external thread |
Thread Measurement 2 | M16X1.5 |
Length | 195 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 195 mm |
Type | Inner Tie Rod |
Important compatibility info
Length | 94 mm |
Thread Measurement 1 | M14x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5520 |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5784 |
Important compatibility info
Material | Plastic |
for OE number | 038 121 144 A |
Function | Coolant Flange |
Type | Coolant Flange |
Important compatibility info
Function | Wiper Blade |
Length | 19 Inch |
Quantity | 10 |
Wiper blade type | Bracket wiper blade |
Type | Wiper Blade |
Number of adapters | 1 |
Length | 480 mm |
Important compatibility info
Placement on Vehicle | Front Axle |
Bearing Code | Gen 0 |
Inner diameter 1 | 35 mm |
Inner diameter 2 | 35 mm |
Outer diameter 1 | 60 mm |
Width 1 | 18.5 mm |
Tightening Torque | 220 Nm |
Outer diameter 2 | 60 mm |
Width 2 | 18.5 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Additional Information | with gaskets/seals |
Number of Teeth | 18 |
Water Pump Pulley Diameter | 26 mm |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Water Pump Pulley Diameter | 54 mm |
Replaced by | BWP1696 |
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Type | Brake Drum |
Number of Holes | 5 |
Inner Brake Drum Height | 40 mm |
Inner Brake Drum Diameter | 220 mm |
Function | Brake Drum |
Placement on Vehicle | Rear Axle |
Important compatibility info
Length | 435 mm |
Placement on Vehicle | Rear Axle Right, Lower, Rear |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | FCA8063 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Placement on Vehicle | Front Axle |
Type | Accessory Kit, disc brake pad |
Function | Accessory Kit, disc brake pad |
Important compatibility info
Material | Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Important compatibility info
Number of pads | 4 |
Wear Warning Contact | with acoustic wear warning |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 16.1 mm |
Number of wear indicators | 2 Per Axle |
Brake System | Brembo |
Type | Brake Pad Set, disc brake |
Height 1 | 91.4 mm |
Width 1 | 129.2 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Length | 70 mm |
Diameter | 35 mm |
Inner diameter | 14 mm |
Paired article numbers | FSK8169 |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle, Left, Right, Lower, Front |
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Brake System | KNORR SB/SN7000 |
Important compatibility info
Thread Measurement 2 | M10x1.25 |
Thread Size | M10x1.25 |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Length | 251 mm |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Length | 154 mm |
Thread Measurement 1 | M10x1.25 |
Thread Measurement 2 | M14x1.5 |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Placement on Vehicle | Front Axle |
Type | Accessory Kit, disc brake pad |
Important compatibility info
Type | Clutch Kit |
Number of Parts | 3 -part |
Function | Clutch Kit |
Outer diameter | 220 mm |
Engine Version | for engines with dual-mass flywheel |
Number of Teeth | 28 |
Hub Profile | 22.1 x 20.3 |
Important compatibility info
Number of Holes | 6 |
Rotor Style | Vented |
Outer diameter | 277 mm |
Brake Disc Thickness | 22 mm |
Height | 45.2 mm |
Minimum thickness | 20.4 mm |
Centering Diameter | 87 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 324 mm |
Rotor Style | Vented |
Brake Disc Thickness | 30 mm |
Height | 77.1 mm |
Minimum thickness | 28.4 mm |
Centering Diameter | 79 mm |
Function | Brake Disc |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Length | 397 mm |
Function | Brake Hose |
Type | Brake Hose |
Thread Measurement 1 | 3/8"-24 |
Thread Measurement 2 | 3/8"-24 |
Thread Type | with external thread |
Important compatibility info
Length | 225 mm |
Function | Brake Hose |
Thread Measurement 2 | M10x1 |
Thread Measurement 1 | M10x1 |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Length 1 | 410 mm |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023