Important compatibility info
Valve type | Pressure Limiting Valve |
Height | 88 mm |
Additional Information 2 | with one anti-return valve |
Thread Size | UNF 3/4''-16 |
Filter type | Spin-on Filter |
Function | Oil Filter |
Type | Oil Filter |
Outer diameter | 66 mm |
Important compatibility info
Width | 25 mm |
Quantity | 1 |
Diameter From | 73 mm |
Diameter To | 79 mm |
Function | Fastening Clamp, charge air hose |
Type | Fastening Clamp, charge air hose |
Important compatibility info
Internal Teeth, wheel side | 24 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Thread Size | M22X1.5 |
Length | 154 mm |
External Teeth, Wheel Side | 27 |
Seal Diameter | 60 mm |
Technical Information Number | Middle groove |
Additional Information 2 | with groove |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Important compatibility info
Placement on Vehicle | Left Rear |
Length 1 | 1680 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Length | 357 mm |
Additional Information 2 | with banjo bolt |
Additional Information | with banjo fitting |
Thread Type | with internal thread |
Thread Size | M10x1.5 |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Mounting Bolt Thread Size | M10x1.5 |
Important compatibility info
Number of Teeth, ABS ring | 48 |
Internal Teeth, wheel side | 25 |
Length | 155 mm |
Thread Size | M22X1,5 |
Function | Joint Kit, drive shaft |
Technical Information Number | Middle groove |
Seal Diameter | 62.2 mm |
External Teeth, Wheel Side | 27 |
Type | Joint Kit, drive shaft |
Additional Information 2 | with groove |
Important compatibility info
External Teeth, Diff.Side | 26 |
Function | Drive Shaft |
Transmission Type | Electrical transmission |
External Teeth, Wheel Side | 27 |
Length | 680 mm |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1268)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1269)
Important compatibility info
External Teeth, Diff.Side | 24 |
Number of Teeth, ABS ring | 48 |
Function | Drive Shaft |
External Teeth, Wheel Side | 30 |
Length | 976 mm |
Transmission Type | Manual Transmission |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length 1 | 1720 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Function | Cable Pull, parking brake |
Length 1 | 1638 mm |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Important compatibility info
Important compatibility info
Pressure | 20 psi |
Material | Metal |
Function | Cap, radiator |
Type | Cap, radiator |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with clamps |
Length | 208 mm |
Inner diameter 1 | 15 mm |
Inner diameter 2 | 48 mm |
Material | Thermoplast |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Important compatibility info
Inner diameter | 14.2 mm |
Diameter | 52.7 mm |
Length | 56 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6559 |
Important compatibility info
Number of Parts | 2 -part |
Number of Teeth | 21 |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Placement on Vehicle | Front Axle, Right, Rear |
Length | 130 mm |
Inner diameter | 18 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6867 |
Important compatibility info
Function | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle, Right, Rear |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK7144 |
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Textile |
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
Inner diameter | 14.2 mm |
Diameter | 36.1 mm |
Length | 49.8 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK7675 |
Placement on Vehicle | Rear Axle, Left, Right |
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Inner diameter | 26 mm |
Type | Repair Kit, stabiliser coupling rod |
Replaces | BSK6068K |
Placement on Vehicle | Front Axle |
Important compatibility info
Additional Information 2 | with bearing |
Function | Suspension Strut Support Mount |
Height | 50 mm |
Inner diameter | 22 mm |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5419 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5210)
Important compatibility info
Function | Brake Hose |
Thread Type | with internal thread |
Thread Measurement 1 | M10x1 |
Additional Information | with banjo fitting |
Placement on Vehicle | Front Axle Right |
Length | 541 mm |
Type | Brake Hose |
Important compatibility info
Placement on Vehicle | Left, Lower, Front |
Function | Charge Air Hose |
Colour | Black |
Material | PE (Polyethylene) |
Inner diameter 1 | 47 mm |
Type | Charge Air Hose |
Inner diameter 2 | 34 mm |
Replaced by | BTH1047 |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1105S)
Important compatibility info
Inner diameter 1 | 34 mm |
Material | Silicone |
Colour | Black |
Function | Charge Air Hose |
Inner diameter 2 | 34 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1104S)
Important compatibility info
Thread Measurement 1 | M20X1.5 |
Pipe Diameter | 50 mm |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 869 mm |
Function | Centre Rod Assembly |
Important compatibility info
Axle Joint Thread Type | with right-hand thread, with external thread |
Axle Joint Length | 313 mm |
Thread Measurement 2 | M14X1.5 |
Length | 313 mm |
Thread Measurement 1 | M14X1.5 |
for steering manufacturer | TRW |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Thread Type | with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5255 |
Replaces | BTR5628 |
Important compatibility info
Thread Measurement 2 | M12X1.25 |
Length | 297 mm |
Thread Measurement 1 | M18X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 297 mm |
Axle Joint Thread Type | with right-hand thread, with external thread |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5800 |
Important compatibility info
Material | Plastic |
for OE number | 1321115 |
Function | Coolant Flange |
Type | Coolant Flange |
Additional Information 2 | with bore for sensor |
Important compatibility info
Number of adapters | 1 |
Quantity | 1 |
Wiper blade type | Bracket wiper blade |
Length | 530 mm |
Function | Wiper Blade |
Type | Wiper Blade |
Important compatibility info
Bearing Code | Gen 2 |
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 28 mm |
Outer diameter 1 | 138 mm |
Width 1 | 90 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 30 mm |
Outer diameter 1 | 120 mm |
Width 1 | 71.4 mm |
Payload | for increased payload |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Type | Wheel Bearing Kit |
Bearing Code | Gen 2 |
Important compatibility info
Bearing Code | Gen 1 |
Inner diameter 1 | 38 mm |
Outer diameter 1 | 72 mm |
Width 1 | 38 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Important compatibility info
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 42 mm |
Outer diameter 1 | 77 mm |
Width 1 | 39 mm |
Tightening Torque | 280 Nm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Bearing Code | Gen 1 |
Important compatibility info
Height | 49 mm |
Number of Wings | 7 |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Thread Size | M8 |
Impeller Diameter | 54 mm |
Type | Water Pump, engine cooling |
Important compatibility info
Impeller Diameter | 63.9 mm |
Water Pump Pulley Diameter | 57 mm |
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Number of Teeth | 19 |
Number of Wings | 8 |
Height | 52.5 mm |
Type | Water Pump, engine cooling |
Replaces | BWP1933; BWP2068; BWP2231 |
Important compatibility info
Paired article numbers | FCA7836 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Steel |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5773)
- 2x Borg & Beck Mounting, control/trailing arm (BSK7812)
Important compatibility info
Length | 94 mm |
Material | Metal |
Paired article numbers | FDL7681 |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Rear Axle Left |
Important compatibility info
Diameter | 24.5 mm |
Additional Information | with gaskets/seals |
Diameter 2 | 11 mm |
Opening Temperature | 88 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Important compatibility info
Function | Oil sump |
Material | Aluminium |
Additional Information 2 | with bore for oil-level sensor |
Type | Oil sump |
Important compatibility info
Width 1 | 97 mm |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Outer diameter 1 | 140 mm |
Inner diameter 1 | 25 mm |
Placement on Vehicle | Rear Axle Right |
Important compatibility info
Brake System | KNORR SB/SN5000 |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length 1 | 1950 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Length 2 | 1164 mm |
Important compatibility info
Colour | Black |
Inner diameter 1 | 37 mm |
Material | Silicone |
Inner diameter 2 | 37 mm |
Type | Charge Air Hose |
Function | Charge Air Hose |
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 50 °C |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Brake Disc Thickness | 22 mm |
Outer diameter | 314 mm |
Minimum thickness | 20 mm |
Centering Diameter | 76 mm |
Number of Holes | 5 |
Height | 75.6 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 330 mm |
Brake Disc Thickness | 22 mm |
Height | 36.2 mm |
Minimum thickness | 20 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Placement on Vehicle | Rear Axle |
Quantity Unit | Set |
Rotor Style | Vented |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 1 |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 4 |
Outer diameter | 231 mm |
Brake Disc Thickness | 17 mm |
Height | 50 mm |
Minimum thickness | 15 mm |
Centering Diameter | 64 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 4 |
Important compatibility info
Brake Disc Thickness | 30 mm |
Outer diameter | 320 mm |
Rotor Style | perforated/vented |
Number of Holes | 9 |
Height | 46.5 mm |
Minimum thickness | 28 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Type | Brake Disc Rotor |
Quantity | 1 |
Surface | Coated |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023