Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 33.3 mm |
| Outer diameter | 60 mm |
| Inner diameter | 29 mm |
| Function | Tensioner Pulley, timing belt |
| Weight | 0.322 kg |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.16
Important compatibility info
| Weight | 9.040 kg |
| Length | 889 mm |
| Outer diameter | 50 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 656 mm |
| Mounting points diameter | 16 mm. 25 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£233.03
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.073 kg |
| Cable Length | 588 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.29
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Weight | 0.192 kg |
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 178 mm |
| Height | 53 mm |
| Width | 128 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Piston Diameter | 19 mm |
| Weight | 0.195 kg |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.57
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.005 kg |
| Placement on Vehicle | Front Axle |
| Length | 966 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 99 mm |
| Inner diameter | 17 mm |
| Shape/Form | slotted |
| Type | Mounting, leaf spring |
| Function | Mounting, leaf spring |
| Weight | 2.037 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.56
Important compatibility info
| Width | 162 mm |
| Outer diameter | 99 mm |
| Thickness | 100 mm |
| Inner diameter | 26 mm |
| Weight | 5.258 kg |
| Hole Pitch 1/ Hole Pitch 2 | 85/60 |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.25
Important compatibility info
| Placement on Vehicle | Upper |
| Material | PE (Polyethylene) |
| Weight | 0.59 kg |
| Type | Charge Air Hose |
| Hose Length | 430 mm |
| Wall Thickness | 6.5 mm |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.42
Important compatibility info
| Belts | with rounded tooth profile |
| Number of Teeth | 129 |
| Function | Timing Belt Kit |
| Weight | 0.650 kg |
| Type | Timing Belt Kit |
| Width | 25.4 mm |
| for OE number | 1 000 156 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner Pulley, timing belt (11388)
- 1x Febi Timing Belt (19536)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (15177)
£67.79
Important compatibility info
| Outer diameter | 18 mm |
| Number of Connectors / Ports | 3 |
| Weight | 0.025 kg |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.50
Important compatibility info
| Length | 343 mm |
| Outer thread | M14 x 1,5 mm |
| Weight | 0.460 kg |
| Placement on Vehicle | Front Axle left or right |
| Type | Tie Rod Axle Joint |
| Function | Tie Rod Axle Joint |
| Driver Position | for left-hand drive vehicles |
£18.09
Important compatibility info
| Weight | 1.530 kg |
| Placement on Vehicle | Front Axle |
| Length | 131.4 mm |
| Width | 53.7 mm. 65 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 12.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.86
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 178748 |
| Weight | 5.2 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.68
Important compatibility info
| Weight | 0.524 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 19 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (02942)
- 1x Febi Securing Plate, ball joint (07862)
- 3x Febi Clamping Bolt, ball joint (07866)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (22263)
£11.82
Important compatibility info
| Weight | 0.18 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 145 mm |
| Thickness | 55 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Replaces | 27411 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.86
Important compatibility info
| Weight | 3.43 kg |
| Placement on Vehicle | Rear Axle |
| Width | 55 mm |
| Outer diameter | 270 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.23
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Number of Connectors / Ports | 1 |
| for OE number | 4G0 199 381 NF |
| Weight | 1.565 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NG (febi 180461 / SWAG 33 10 7686).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.66
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Weight | 0.025 kg |
| for OE number | 13 62 7 806 782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Type | Suspension Spring |
| Weight | 1.7 kg |
| Number of Coils | 5.3 |
| Outer diameter | 140 mm |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 326 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023