Important compatibility info
| Function | Oil sump | 
| Type | Oil sump | 
| Additional Information | without oil drain plug | 
| Wet Sump Material | Steel | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil sump | 
| Extra Description | febi Plus | 
| Type | Oil sump | 
| Additional Information | without oil drain plug | 
| for OE number | 055 103 601 | 
| Wet Sump Material | Steel | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 316 mm | 
| Width | 240 mm | 
| Thickness | 88 mm | 
| Colour | Black | 
| Surface | Painted | 
| Function | Oil sump | 
| Internal Thread Size | M12 x 1,5 | 
| Type | Oil sump | 
| Additional Information | without oil drain plug | 
| Wet Sump Material | Sheet Steel | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal | 
| Outer diameter | 70.5 mm | 
| Thickness | 8.3 mm | 
| Inner diameter | 49 mm | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Rolling Bearing, suspension strut support mount | 
| Type | Rolling Bearing, suspension strut support mount | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 8 | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Aluminium | 
| Seal Material | Paper | 
| Housing material | Cast Aluminium | 
| Additional Information | with gasket/seal | 
| Type | Water Pump, engine cooling | 
| Replaces | 37413 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Length | 250 mm | 
| Paired article numbers | 17208 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5 | 
| Additional Information | with nuts | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22337)
- 2x Febi Nut (22263)
Important compatibility info
| Placement on Vehicle | Front Axle Right | 
| Length | 250 mm | 
| Paired article numbers | 17207 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5 | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22338)
- 2x Febi Nut (22263)
Important compatibility info
| Material | Aluminium | 
| Outer diameter | 60 mm | 
| Steering arm type | Control Arm | 
| Thread Length | 32 mm | 
| Additional Information | with lock nut | 
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with bearing, with ball joint | 
| Inner diameter | 10 mm | 
| External Thread Size | M10 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Upper | 
| Material | Aluminium | 
| Steering arm type | Control Arm | 
| Paired article numbers | 12581 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint, with bearing | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws | 
| Outer diameter 2 | 56 mm | 
| Function | Tensioner, timing belt | 
| Outer diameter 1 | 66 mm | 
| Width | 31 mm | 
| Type | Tensioner, timing belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 42 mm | 
| Spanner Size | 13, 22 | 
| Bolt Head/Nut Design | External Hexagon | 
| Quality/ Grade | 10.9 | 
| Surface | Zink flake coated | 
| Function | Tensioner Bolt, alternator mounting | 
| Type | Tensioner Bolt, alternator mounting | 
| External Thread Size | M8 x 1,25 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1520 mm | 
| Placement on Vehicle | Left Rear, Right Rear | 
| Function | Cable Pull, parking brake | 
| Type | Cable Pull, parking brake | 
| Replaces | 14210 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 60 mm | 
| Bolt Hole Circle Diameter | 106.5 mm | 
| Number of Holes | 5 | 
| Outer diameter 1 | 65 mm | 
| Width | 78 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Bearing Type | Angular Ball Bearing | 
| Type | Wheel Bearing Kit | 
| Inner diameter | 30 mm | 
| Additional Information 2 | with RPM sensor | 
| Outer diameter 2 | 140 mm | 
| Function | Wheel Bearing Kit | 
| Replaces | 19654 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 18123 | 
| Placement on Vehicle | Front Axle Left, Lower | 
| Additional Information | with rubber mounts | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 18125 | 
| Placement on Vehicle | Front Axle Right, Lower | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium | 
| Outer diameter | 67 mm | 
| Inner diameter | 14 mm | 
| Paired article numbers | 17453 | 
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right | 
| Thickness | 60 mm | 
| Function | Bushing, axle beam | 
| Type | Bushing, axle beam | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium | 
| Outer diameter | 64 mm | 
| Inner diameter | 14 mm | 
| Paired article numbers | 17452 | 
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right | 
| Thickness | 60 mm | 
| Function | Bushing, axle beam | 
| Type | Bushing, axle beam | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 193 mm | 
| Thickness | 70 mm | 
| Spanner Size | 21, 17 | 
| Paired article numbers | 21491 | 
| Placement on Vehicle | Front Axle Right | 
| Function | Tie Rod End | 
| Extra Description | ProKit | 
| External Thread Size | M10 x 1,25 | 
| Internal Thread Size | M14 x 1,5 | 
| Type | Tie Rod End | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 116 mm | 
| Material | Steel | 
| Paired article numbers | 27422 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M12 x 1,75 | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Length | 100 mm | 
| Inner diameter | 10.3 mm | 
| Spanner Size | 16 | 
| Rod/Strut | Coupling Rod | 
| Thread Length | 25 mm | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5 | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 300 mm | 
| Material | Steel | 
| Rod/Strut | Coupling Rod | 
| Pipe Diameter | 9 mm | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Thread Length | 23 mm | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5 | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Length | 300 mm | 
| Rod/Strut | Coupling Rod | 
| Surface | Zinc-coated | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5 | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 295 mm | 
| Outer diameter | 10 mm | 
| Rod/Strut | Coupling Rod | 
| Surface | Zinc-coated | 
| Quality/ Grade | 10 | 
| Additional Information | with nuts | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M12 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 45.3 mm | 
| Thickness | 13 mm | 
| Inner diameter | 12.2 mm | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Rolling Bearing, suspension strut support mount | 
| Type | Rolling Bearing, suspension strut support mount | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 29 | 
| Number of Connectors / Ports | 3 | 
| Connector Shape | Rectangular | 
| Colour Coding | Black | 
| Function | Temperature Switch, radiator fan | 
| External Thread Size | M22 x 1,5 | 
| Type | Temperature Switch, radiator fan | 
| Additional Information 2 | with seal ring | 
| Switching temperature range 1 from | 95 °C | 
| Switching temperature range 1 to | 84 °C | 
| Switching temperature range 2 from | 102 °C | 
| Switching temperature range 2 to | 92 °C | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal | 
| Placement on Vehicle | Rear Axle | 
| Function | Suspension Strut Support Mount | 
| Type | Suspension Strut Support Mount | 
| Additional Information 2 | without ball bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 10 | 
| Length | 96 mm | 
| Surface | Phosphatized | 
| External Thread Size | M11 x 1,5 | 
| Thread Length | 92 mm | 
| Material | Steel | 
| Function | Cylinder Head Bolt | 
| Bolt Head/Nut Design | Polydrive | 
| Type | Cylinder Head Bolt | 
| Screw length below head | 101 mm | 
| Number of screws | 10 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right | 
| Material | Rubber/Metal | 
| Bearing/Mounting Type | Hydro Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | for control arm | 
| Additional Information 2 | with bolts/screws | 
| Placement on Vehicle | Lower Front Axle, both sides | 
| Material | Rubber/Metal | 
| Bearing/Mounting Type | Hydro Mount | 
| Function | Mounting, control/trailing arm | 
| Type | Mounting, control/trailing arm | 
| Additional Information | with holder | 
| Extra Description | ProKit | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting, control/trailing arm (18688)
- 2x Febi Mounting and Bolting Kit, control/trailing arm (104977)
Important compatibility info
| Placement on Vehicle | Right | 
| Material | Rubber/Metal | 
| Outer diameter | 70 mm | 
| Inner diameter | 10 mm | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, engine | 
| Height | 40 mm. 53 mm | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M10 x 1 | 
| Length | 412 mm | 
| Spanner Size | 16 | 
| Function | Brake Hose | 
| External Thread Size | M10 x 1 | 
| Type | Brake Hose | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side | 
| Length | 113 mm | 
| Material | Thermoplast | 
| Inner diameter 1 | 25 mm | 
| Inner diameter 2 | 88 mm | 
| Function | Bellow Kit, drive shaft | 
| Type | Bellow Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (15840)
- 1x Febi Screw (03634)
- 1x Febi Circlip (03185)
- 1x Febi Spring Washer (07254)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (29821)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided | 
| Function | Bellow Kit, drive shaft | 
| Inner diameter 2 | 64 mm | 
| Inner diameter 1 | 25 mm | 
| Material | Rubber | 
| Length | 98 mm | 
| Type | Bellow Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Circlip (09454)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided | 
| Function | Bellow Kit, drive shaft | 
| Inner diameter 2 | 70 mm | 
| Material | Rubber | 
| Inner diameter 1 | 24 mm | 
| Length | 112 mm | 
| Type | Bellow Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17124)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (05336)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
| Outer diameter | 60 mm | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Function | Bushing, axle beam | 
| Type | Bushing, axle beam | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 70 mm | 
| Operating Mode | Automatic | 
| Housing material | Aluminium | 
| Function | Belt Tensioner, v-ribbed belt | 
| Track rollers material | Metal | 
| Type | Belt Tensioner, v-ribbed belt | 
| Width of castor bearing surface | 26 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 115 mm | 
| Width | 28.7 mm | 
| Material | Steel | 
| Outer diameter | 34 mm | 
| Inner diameter | 12 mm. 13.5 mm | 
| Paired article numbers | 11023 | 
| Rod/Strut | Coupling Rod | 
| Surface | Zinc-coated | 
| Placement on Vehicle | Front Axle Left | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Type | Link/Coupling Rod, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 115 mm | 
| Width | 28.7 mm | 
| Material | Steel | 
| Outer diameter | 34 mm | 
| Inner diameter | 12 mm. 13.5 mm | 
| Paired article numbers | 11022 | 
| Rod/Strut | Coupling Rod | 
| Surface | Zinc-coated | 
| Placement on Vehicle | Front Axle Right | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Type | Link/Coupling Rod, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt | 
| Operating Mode | Automatic | 
| Outer diameter | 60 mm | 
| Width of castor bearing surface | 26.5 mm | 
| Track rollers material | Plastic | 
| Type | Belt Tensioner, v-ribbed belt | 
| Additional Information 2 | with screw | 
| Housing material | Metal | 
| for OE number | 5751.30 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right | 
| Length | 332 mm | 
| Paired article numbers | 28288 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5 | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Inner diameter | 19 mm | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Length | 78 mm | 
| Additional Information | with rubber mounts | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M12 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic | 
| Outer diameter | 117 mm | 
| Thickness | 12.5 mm | 
| Inner diameter | 85 mm | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Function | Rolling Bearing, suspension strut support mount | 
| Type | Rolling Bearing, suspension strut support mount | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 139 mm | 
| Inner diameter | 91 mm | 
| Paired article numbers | 27458 | 
| Material | Rubber/Metal | 
| Placement on Vehicle | Front Axle Left | 
| Additional Information 2 | with ball bearing | 
| Type | Repair Kit, suspension strut support mount | 
| Function | Repair Kit, suspension strut support mount | 
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (27455)
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
Important compatibility info
| Outer diameter | 139 mm | 
| Inner diameter | 91 mm | 
| Paired article numbers | 27457 | 
| Material | Rubber/Metal | 
| Placement on Vehicle | Front Axle Right | 
| Additional Information 2 | with ball bearing | 
| Type | Repair Kit, suspension strut support mount | 
| Function | Repair Kit, suspension strut support mount | 
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (27456)
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
Important compatibility info
| Housing material | Cast Aluminium | 
| Number of Wings | 7 | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Plastic | 
| Seal Material | Paper | 
| Additional Information | with gasket/seal | 
| Type | Water Pump, engine cooling | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear Axle Right | 
| Length | 200 mm | 
| Paired article numbers | 26531 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Outer diameter | 8 mm | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| External Thread Size | M10 x 1,5, M12 x 1,5 | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,5, M12 x 1,5 | 
| Placement on Vehicle | Front Axle Left, Rear Axle Left | 
| Length | 200 mm | 
| Paired article numbers | 26532 | 
| Rod/Strut | Coupling Rod | 
| Function | Link/Coupling Rod, stabiliser bar | 
| Extra Description | ProKit | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Additional Information | with nuts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 24532 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint | 
| Additional Information | with rubber mounts | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 24533 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Additional Information | with rubber mounts | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with ball joint | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































