Important compatibility info
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
| Length | 1652 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Function | Bearing, clutch lever |
| Outer diameter | 30.5 mm |
| Type | Bearing, clutch lever |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 11 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| for OE number | 51.06500.6432 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 252 mm |
| Outer diameter | 36 mm. 50 mm |
| Function | Repair Kit, kingpin |
| External Thread Size | M36 x 1,5 |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10500)
- 1x Febi Bush, kingpin (14467)
- 1x Febi Washer (10502)
- 1x Febi Seal Ring, steering knuckle (14459)
- 1x Febi Seal Ring, steering knuckle (14432)
- 1x Febi Spacer, kingpin (14460)
- 1x Febi Seal Ring, steering knuckle (14461)
- 1x Febi Seal Ring (14462)
- 2x Febi Spacer, kingpin (14463)
- 4x Febi Spacer, kingpin (14464)
- 2x Febi Spacer, kingpin (14465)
- 2x Febi Spacer, kingpin (14466)
- 1x Febi Split Pin (14433)
Important compatibility info
| Length | 45.5 mm |
| Outer diameter | 6.5 mm |
| Function | Spring Retaining Pin, brake shoe |
| Type | Spring Retaining Pin, brake shoe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Holder, brake camshaft seal ring (07480)
- 2x Febi Bearing, brake camshaft (07479)
- 3x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Spacer, brake shaft (07485)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07491)
- 1x Febi Spacer, brake shaft (07487)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 2x Febi Grease Nipple (06533)
- 1x Febi Spacer, brake shaft (07490)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 125 mm |
| Thread Type | with right-hand thread |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, stabiliser bar |
| Inner diameter | 32 mm |
| Outer diameter | 44 mm. 54 mm |
| Placement on Vehicle | Front Axle |
| Material | Plastic |
| Function | Mounting, stabiliser bar |
| Colour | White |
| Length | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Steel |
| Outer diameter | 36 mm |
| Thickness | 22 mm |
| Spanner Size | 30 |
| Surface | Phosphatized |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10 |
| DIN / ISO | 74361 |
| Bolt / Nut Version | Countersunk Head |
| Wheel Fastening | Flat Seat |
| Type | Wheel Nut |
| Function | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pressure | 6.5 bar |
| Type | Oil Pressure Valve |
| Function | Oil Pressure Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 140 mm |
| Bolt / Nut Version | Stretch Bolt |
| Function | Cylinder Head Bolt |
| Quality/ Grade | 12.9 |
| Surface | Phosphatized |
| Material | Steel |
| Bolt Head/Nut Design | Male Torx |
| Spanner Size | M 14 |
| Shaft Length | 70 mm |
| Thread Length | 70 mm |
| External Thread Size | M14 x 2 |
| Type | Cylinder Head Bolt |
| Screw length below head | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 4.5 mm |
| Inner diameter | 30 mm |
| Colour | Black |
| Type | Seal Ring |
| Function | Seal Ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, outer, Rear Axle Right |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 175 mm |
| Thickness | 14 mm |
| Inner diameter | 145 mm |
| Type | Shaft Seal, wheel hub |
| Function | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 20 mm |
| Function | Washer |
| Thickness | 2.5 mm |
| Type | Washer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
| for OE number | 424694 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PA (polyamide) |
| Internal Thread Size | M18 x 1,5 |
| Colour | Black |
| DIN / ISO | 74323 |
| Number of Coils | 19 |
| Working length | 4 m |
| Function | Spiral Hose |
| External Thread Size | M16 x 1,5 |
| Type | Spiral Hose |
| Additional Information 2 | with adapter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, spring bolt |
| Type | Repair Kit, spring bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Spring Bolt (03126)
- 1x Febi Bush, spring shackle (01491)
- 2x Febi Seal Ring (03994)
- 1x Febi Washer (03990)
- 1x Febi Washer (04835)
- 1x Febi Screw (02684)
- 1x Febi Washer (01965)
- 1x Febi Nut (02685)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (01098)
Important compatibility info
| Function | Repair Kit, spring bolt |
| Type | Repair Kit, spring bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Spring Bolt (01614)
- 1x Febi Bushing, leaf spring (01427)
- 2x Febi Seal Ring, spring bush (spring eye) (03993)
- 1x Febi Washer (03989)
- 1x Febi Washer (04837)
- 1x Febi Screw (02684)
- 1x Febi Washer (01965)
- 1x Febi Nut (02685)
- 1x Febi Grease Nipple (01096)
- 2x Febi Grease Nipple (01098)
Important compatibility info
| Function | Wheel Stud |
| Bolt Head Diameter | 40 mm |
| Surface | Zinc-coated |
| Thread Length | 52 mm |
| Quality/ Grade | 10.9 |
| Shaft Length | 25 mm |
| Length | 90 mm |
| Material | Steel |
| Screw length below head | 80 mm |
| External Thread Size | M18 x 2 |
| Rims | for Trilex® rim |
| Type | Wheel Stud |
| Additional Information | with spring |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Stud (05687)
- 1x Febi Wheel Nut (03641)
- 1x Febi Spring Cotter, wheel stud (03517)
Important compatibility info
| Function | Brake Shoe Pin Set |
| Type | Brake Shoe Pin Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe Bolt (05738)
- 2x Febi Washer (05776)
- 2x Febi Circlip, brake anchor pin (04767)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















