Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1013 mm |
| Paired article numbers | 29578 |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1392 537 |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
| Additional Information 2 | with bolts/screws |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 495 mm |
| Outer diameter | 28 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 18 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Outer Length | 50 mm |
| Outer diameter 2 | 47 mm |
| Outer diameter 1 | 52 mm |
| Inner diameter | 16.5 mm |
| Length | 26 mm |
| Placement on Vehicle | Front Axle, outer |
| Type | Mounting, stabiliser bar |
| Replaces | 29648 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Centre Rod Assembly |
| Pipe Diameter | 38 mm |
| Cone Size | 26 mm |
| Rod/Strut | Push Rod |
| Length | 831 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 32.5 mm |
| Additional Information 2 | with plain bearing |
| Extra Description | ProKit |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Length | 272 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Kingpin (29711)
- 2x Febi Bush, kingpin (29712)
- 8x Febi Bush, steering knuckle (08524)
- 2x Febi Nut (29718)
- 2x Febi Seal Ring, steering knuckle (29716)
- 2x Febi Pressure Piece, kingpin (29713)
Important compatibility info
| Length | 254 mm |
| Outer diameter | 31.5 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with plain bearing |
| Replaces | 79720 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, steering knuckle (08524)
- 4x Febi Bush, steering knuckle (29780)
- 2x Febi Bush, kingpin (29723)
- 2x Febi Pressure Piece, kingpin (29713)
- 2x Febi Seal Ring, steering knuckle (29716)
- 2x Febi Seal Ring, steering knuckle (29724)
- 2x Febi Nut (29718)
Important compatibility info
| Length | 172 mm |
| Outer diameter | 32 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with plain bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Kingpin (29731)
- 2x Febi Bush, steering knuckle (29732)
- 2x Febi Bush, kingpin (29733)
- 2x Febi Bush, kingpin (29734)
- 4x Febi Seal Ring, steering knuckle (29735)
- 2x Febi Seal Ring, steering knuckle (29736)
- 2x Febi Seal Ring, steering knuckle (29737)
- 2x Febi Spacer, kingpin (29740)
- 2x Febi Spacer, kingpin (29741)
- 2x Febi Spacer, kingpin (29742)
- 2x Febi Spacer, kingpin (29743)
Important compatibility info
| Length | 633 mm |
| Height | 79 mm |
| Width | 570 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 105 mm |
| Thickness | 10 mm |
| Inner diameter | 82 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 140 mm |
| Thickness | 13 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 182 mm |
| Thickness | 26 mm |
| Inner diameter | 87 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Gasket Set, differential |
| Type | Gasket Set, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, differential (29782)
- 1x Febi Shaft Seal, differential (29783)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 140 mm |
| Thickness | 18.5 mm |
| Inner diameter | 85 mm |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 50 mm |
| Thickness | 10 mm |
| Inner diameter | 34 mm |
| Function | Shaft Seal, injector pump |
| Type | Shaft Seal, injector pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 180 mm |
| Thickness | 12 mm |
| Inner diameter | 154 mm |
| Function | Shaft Seal, crankshaft |
| Additional Information 2 | with mounting sleeve |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hub external diameter | 115 mm |
| Hub fastening hole diameter | 15.1 mm |
| Pitch circle diameter, clutch pressure plate | 375 mm |
| Running surface internal diameter | 235 mm |
| External diameter, clutch pressure plate | 395 mm |
| Pitch circle diameter, hub | 74 mm |
| Number of EDC bores/notches | 37 |
| Hub internal diameter | 52 mm |
| Number of Teeth | 132 |
| Function | Flywheel |
| Additional Information | with starter motor sprocket |
| Number of clutch pressure plate fastening holes | 12 |
| Number of hub fastening holes | 8 |
| Type | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pitch circle diameter, clutch pressure plate | 375 mm |
| Number of hub fastening holes | 8 |
| External diameter, clutch pressure plate | 395 mm |
| Hub external diameter | 115 mm |
| Running surface internal diameter | 235.9 mm |
| Additional Information | with starter motor sprocket |
| Number of Teeth | 133 |
| Function | Flywheel |
| Pitch circle diameter, hub | 84 mm |
| Number of EDC bores/notches | 37 |
| Hub internal diameter | 51.9 mm |
| Hub fastening hole diameter | 15 mm |
| Number of clutch pressure plate fastening holes | 12 |
| Type | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 580 mm |
| Height | 37 mm |
| Width | 165 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Length | 438 mm |
| Height | 57 mm |
| Width | 182 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 182 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Length | 439 mm |
| Height | 57 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 134 mm |
| Height | 30 mm |
| Length | 380 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Filter type | Pollen Filter |
| Width | 100 mm |
| Height | 8 mm |
| Length | 340 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 260 mm |
| Height | 40 mm |
| Width | 155 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 31 mm |
| Outer diameter | 115 mm |
| Inner diameter | 75 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Bearing Code | 33015 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Width | 27 mm |
| Outer diameter | 125 mm |
| Inner diameter | 70 mm |
| Bearing Type | Cylindrical Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Inner diameter | 55 mm |
| Outer diameter | 90 mm |
| Width | 27 mm |
| Type | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bearing Code | 33011 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 221 mm |
| Outer diameter | 108 mm |
| Filter type | Spin-on Filter, with water separator |
| Function | Fuel filter |
| Internal Thread Size | 1" - 14 UNS |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
| Chemical Properties | Rape Seed oil resistant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 143 mm |
| Outer diameter | 94 mm |
| Filter type | Spin-on Filter |
| Function | Fuel filter |
| Internal Thread Size | 1" - 14 UNS |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 532 mm |
| Outer diameter | 265 mm |
| Inner diameter | 170 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Replaces | 35598 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























