Important compatibility info
Function | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Inner diameter 2 | 86 mm |
Inner diameter 1 | 22 mm |
Length | 91 mm |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Important compatibility info
Function | Bellow Kit, drive shaft |
Extra Description | Trilobe |
Length | 84 mm |
Inner diameter 2 | 58 mm |
Inner diameter 1 | 18 mm |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Important compatibility info
Extra Description | Trilobe |
Function | Bellow Kit, drive shaft |
Length | 87 mm |
Inner diameter 2 | 73 mm |
Inner diameter 1 | 23 mm |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Important compatibility info
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Function | Bellow Kit, drive shaft |
Material | Thermoplast |
Inner diameter 1 | 30 mm |
Inner diameter 2 | 98 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Length | 129 mm |
Lubrication | with grease lubrication |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Rear |
Length | 336 mm |
Material | Cast Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Thread Measurement 2 | M12X1.25 |
Thread Size | M12X1.25 |
Length | 260 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Size | M10X1.25 |
Length | 252 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Placement on Vehicle | Upper, Rear |
Outer diameter | 92 mm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Height | 35 mm |
Type | Mounting, engine |
Important compatibility info
Length | 242 mm |
Height | 47 mm |
Width | 120 mm |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Important compatibility info
Length | 190 mm |
Height | 18 mm |
Width | 219 mm |
Function | Filter, cabin air |
Paired article numbers | BFC1316 |
Type | Filter, cabin air |
Filter type | Particulate Filter |
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 390 mm |
Function | Warning Contact, brake pad wear |
Required quantity | 1 |
Type | Warning Contact, brake pad wear |
Important compatibility info
Outer diameter | 62 mm |
Filter type | In-Line Filter |
Inlet Diameter | 8 mm |
Outlet Diameter | 8 mm |
Pressure | 3 bar |
Regulator | with pressure regulator |
Function | Fuel filter |
Type | Fuel filter |
Height | 164 mm |
Important compatibility info
Outer diameter | 93 mm |
Thread Size | M 22X1.5 |
Filter type | Spin-on Filter |
Function | Oil Filter |
Type | Oil Filter |
Height | 141 mm |
Valve type | Pressure Limiting Valve |
Additional Information 2 | with one anti-return valve |
Important compatibility info
Thread Size | M24 X 1.5 |
Function | Nut, kingpin |
Type | Nut, kingpin |
Important compatibility info
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 40 |
Internal Teeth, wheel side | 28 |
Seal Diameter | 54.1 mm |
Length | 116 mm |
Additional Information 2 | with groove |
Function | Joint Kit, drive shaft |
Thread Size | M10X1.5 |
Important compatibility info
Version | With fittings(ex.KP) |
Paired article numbers | FCA7951 |
Diameter | 18 mm |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
Function | Drive Shaft |
External Teeth, Diff.Side | 41 |
External Teeth, Wheel Side | 31 |
Type | Drive Shaft |
Length | 1092 mm |
Placement on Vehicle | Front Axle Right |
Replaces | BDS1325 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1186)
Important compatibility info
Function | Drive Shaft |
External Teeth, Wheel Side | 42 |
Length | 463 mm |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1396)
Important compatibility info
Length 1 | 1707 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Placement on Vehicle | Right Rear |
Length 1 | 1600 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Length 1 | 1873 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Important compatibility info
Length 1 | 1267 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Important compatibility info
Length 1 | 2677 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Length 2 | 2452 mm |
Important compatibility info
Length 2 | 705 mm |
Length 3 | 975 mm |
Length 4 | 780 mm |
Length 1 | 980 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Function | Oil Pressure Switch |
Switch Pressure | 0.9 bar |
Thread Size | M10x1.0 |
Type | Oil Pressure Switch |
Important compatibility info
Length | 55 mm |
Inner diameter | 17 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6048 |
Placement on Vehicle | Front Axle, Left, Right, Rear |
Important compatibility info
Inner diameter | 19 mm |
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Front Axle |
Important compatibility info
Inner diameter | 12.1 mm |
Diameter | 39 mm |
Length | 37 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6921 |
Important compatibility info
Function | Bushing, axle cross member |
Type | Bushing, axle cross member |
Placement on Vehicle | Front Axle, Left, Right, Rear |
Important compatibility info
Inner diameter | 12.1 mm |
Diameter | 43.8 mm |
Length | 38 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK7457 |
Placement on Vehicle | Rear Axle, Left, Right |
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Inner diameter | 25 mm |
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Inner diameter | 17 mm |
Type | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Suspension Strut Support Mount |
Additional Information 2 | with bearing |
Paired article numbers | FSM5464 |
Type | Suspension Strut Support Mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Colour | Black |
Inner diameter 2 | 54 mm |
Inner diameter 1 | 54 mm |
Material | PE (Polyethylene) |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Inner diameter 1 | 48 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Inner diameter 2 | 48 mm |
Function | Charge Air Hose |
Port / Connector type | HORSE SHOE CLIP |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 120 mm |
Thread Measurement 2 | M30X1.5 |
Thread Type | with right-hand thread |
Thread Measurement 1 | M22X1.5 |
Cone Size | 30 mm |
Type | Tie Rod End |
Function | Tie Rod End |
Important compatibility info
Thread Measurement 1 | M14x2.0 |
Thread Type | with right-hand thread, with internal thread |
for steering manufacturer | TRW |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR4776 |
Important compatibility info
Thread Type | with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Axle Joint Thread Type | with right-hand thread, with internal thread |
Thread Measurement 2 | M12X1.25 |
Length | 322 mm |
Thread Measurement 1 | M18X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 322 mm |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5581 |
Important compatibility info
Axle Joint Length | 291 mm |
Thread Measurement 2 | M12X1.25 |
Length | 291 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Additional Information | without gaskets/seals |
Housing Type | without housing |
Opening Temperature | 80 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Quantity | 1 |
Wiper blade type | Bracket wiper blade with spoiler |
Length | 700 mm |
Function | Wiper Blade |
Type | Wiper Blade |
Number of adapters | 2 |
Important compatibility info
Bearing Code | Gen 1 |
Additional Information 2 | with integrated magnetic sensor ring |
Inner diameter 1 | 39 mm |
Outer diameter 1 | 72 mm |
Width 1 | 37 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Wheel Bearing Kit |
Width 1 | 42 mm |
Outer diameter 1 | 105 mm |
Inner diameter 1 | 45 mm |
Additional Information 2 | with integrated ABS sensor |
Bearing Code | Gen 2 |
Placement on Vehicle | Rear Axle |
Type | Wheel Bearing Kit |
Important compatibility info
Replaces | BWK1096 |
Bearing Code | Gen 1 |
Inner diameter 1 | 54 mm |
Outer diameter 1 | 96 mm |
Width 1 | 51 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Height | 47 mm |
Number of Wings | 8 |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Number of Teeth | 23 |
Impeller Diameter | 60 mm |
Water Pump Pulley Diameter | 57 mm |
Type | Water Pump, engine cooling |
Water pump impeller material | Metal |
Important compatibility info
Additional Information | with central slave cylinder |
Function | Clutch Kit |
Number of Teeth | 23 |
Type | Clutch Kit |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023