Important compatibility info
Type | Rolling Bearing, suspension strut support mount |
Outer diameter 2 | 115 mm |
Inner diameter 1 | 30 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Height | 42.5 mm |
Material | Plastic |
Inner diameter 2 | 69 mm |
Function | Rolling Bearing, suspension strut support mount |
Weight | 0.22 kg |
Outer diameter 1 | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Operating Mode | Electric |
Additional Information | with pressure plate |
Weight | 0.02 kg |
Control Type | Push Actuation |
Type | Stop Light Switch |
Function | Stop Light Switch |
Housing Colour | black/white |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.135 kg |
Voltage | 24 V |
Spanner Size | 24 |
Thread Length | 12 mm |
Number of Connectors / Ports | 2 |
Control Range | 0,25+0,15 bar |
Function | Sensor, oil pressure |
Switch point to | 5 bar |
for OE number | 002 542 17 17 |
Type | Sensor, oil pressure |
External Thread Size | M18 x 1,5 |
Switch | with alarm switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 182 mm |
Thickness | 26 mm |
Inner diameter | 87 mm |
Function | Shaft Seal, differential |
Weight | 0.005 kg |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 23643 |
Length | 170 mm |
Weight | 0.63 kg |
Placement on Vehicle | Front Axle Left |
Colour | Black |
Surface | Painted |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3. 4 |
Weight | 0.060 kg |
Type | Ignition Switch |
Function | Ignition Switch |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.322 kg |
Filter type | Filter Insert |
Type | Air Filter |
Width | 136 mm |
Height | 52 mm |
Length | 246 mm |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.687 kg |
Length | 125 mm |
Width | 109 mm |
Material | Rubber/Metal |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Warning Contact, brake pad wear |
Brake Type | Disc Brake |
Cable Length | 960 mm |
Weight | 0.047 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane), Plastic |
for OE number | 33 50 6 773 629 |
Function | Dust Cover Kit, shock absorber |
Width | 60 mm |
Length | 216.2 mm |
Placement on Vehicle | Rear Axle left or right |
Weight | 0.11 kg |
Type | Dust Cover Kit, shock absorber |
Important compatibility info
Weight | 0.20 kg |
Placement on Vehicle | Rear Axle Left |
Length | 86 mm |
Material | Steel |
Spanner Size | 16 |
Paired article numbers | 34715 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Surface | Painted |
Colour | Black |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Inner Tie Rod |
Additional Information | with counter nut |
Length | 309 mm |
Placement on Vehicle | Front Axle |
Weight | 0.84 kg |
Extra Description | ProKit |
External Thread Size | M16 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Weight | 0.374 kg |
Function | Tie Rod End |
Length | 78 mm |
External Thread Size | M10 x 1,25 |
Paired article numbers | 107364 |
Extra Description | ProKit |
Type | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.444 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Length | 103 mm |
Width | 78 mm |
Outer diameter | 52 mm. 56 mm |
Thickness | 45 mm |
Inner diameter | 18 mm. 17 mm |
Paired article numbers | 22273 |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Weight | 0.39 kg |
Length | 232 mm |
Filter type | Filter Insert |
Width | 229 mm |
Height | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 11.2 mm |
Weight | 0.388 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
External Thread Size | M14 x 1,5 |
Function | Ball Joint |
Cone Size | 18.5 mm |
Additional Information | with lock nut |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 60 mm |
Outer diameter | 60 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
Inner diameter | 16.1 mm |
Material | Rubber/Metal |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Weight | 0.318 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Weight | 0.36 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 310 mm |
Material | Steel |
Spanner Size | 17 |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Filter type | Filter Insert, with water separator |
Height | 139 mm |
Outer diameter | 90 mm |
Weight | 0.19 kg |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Type | Rubber Buffer, suspension |
Width | 56 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 80 mm |
Weight | 0.072 kg |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket outer diameter | 89.5 mm |
Gasket inner diameter | 82.5 mm |
Outer diameter | 81 mm |
Function | Fuel filter |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Inner diameter | 21 mm |
Filter type | Filter Insert |
Weight | 0.12 kg |
Height | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 172 mm |
Outer diameter | 88 mm |
Filter type | In-Line Filter |
Weight | 0.3 kg |
Function | Fuel filter |
Internal Thread Size | M14 x 1,5 |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.84 kg |
Length | 234 mm |
Paired article numbers | 102131 |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Spanner Size | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.77 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 190 mm |
Internal Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Type | Tie Rod End |
for OE number | 32 10 6 774 335 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, tilt cylinder |
Type | Repair Kit, tilt cylinder |
Weight | 0.41 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.138 kg |
Joint Type | Tripod Joint |
Placement on Vehicle | transmission sided, Front Axle Right |
Length | 100 mm |
Material | Rubber |
Inner diameter 1 | 90 mm |
Inner diameter 2 | 35 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (171723)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Weight | 0.168 kg |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.244 kg |
Placement on Vehicle | transmission sided, Front Axle |
Length | 86 mm |
Material | Rubber |
Inner diameter 2 | 65 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100437)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Length | 1580 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.215 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tie Rod Axle Joint |
Function | Tie Rod Axle Joint |
Placement on Vehicle | Front Axle left or right |
Length | 294 mm |
Outer thread | M14 x 1,5 mm, M14 x 2 mm |
Driver Position | for left-hand drive vehicles |
Weight | 0.460 kg |
Important compatibility info
Function | Gasket Set, steering gear |
Weight | 0.056 kg |
Extra Description | febi Plus |
Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.05 kg |
Type | Switch, reverse light |
Function | Switch, reverse light |
Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 91.7 mm |
Width | 64 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 1.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | CV Joint |
Weight | 0.184 kg |
Length | 118 mm |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 92 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172864)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.165 kg |
Length | 1613 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 12380-30010 |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 0.891 kg |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.030 kg |
Number of Connectors / Ports | 2 |
Function | Switch, reverse light |
Spanner Size | 22 |
External Thread Size | M12 x 1,5 |
Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1515 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Weight | 0.206 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.65 kg |
Paired article numbers | 41969 |
Length | 175 mm |
Thickness | 80 mm |
Spanner Size | 19 |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Placement on Vehicle | Front Axle Left |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 311 mm |
Spanner Size | 32 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Weight | 0.62 kg |
Additional Information | with counter nut |
Extra Description | ProKit |
External Thread Size | M12 x 1,25, M16 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 68 mm |
Outer diameter | 81 mm |
Additional Information 2 | with seal ring |
Filter type | Filter Insert |
Spanner Size | 30 |
Transmission Type | 8-Speed Dual-Clutch Transmission |
Weight | 0.098 kg |
Bolt Head/Nut Design | Male Hex |
Type | Hydraulic Filter, automatic transmission |
Function | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 175 mm |
Thickness | 80 mm |
Spanner Size | 19 |
Paired article numbers | 41968 |
Function | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,25 |
Weight | 0.65 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.190 kg |
Length | 313 mm |
Width | 258 mm |
Function | Filter, cabin air |
Height | 35 mm |
Type | Filter, cabin air |
Filter type | Activated Carbon Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Weight | 0.120 kg |
Opening Pressure | 0.4 bar |
Type | Cap, coolant tank |
Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.508 kg |
Type | Bushing, leaf spring |
Inner diameter | 20 mm |
Outer diameter | 80 mm |
Width | 80 mm |
Material | Rubber |
Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Attachment Parts Set, thermostat housing |
Additional Information 2 | with seal ring, with screw set |
Weight | 0.028 kg |
Type | Attachment Parts Set, thermostat housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, water pump breather (30073)
- 1x Febi Seal Ring (30074)
- 1x Febi Seal Ring (01320)
- 1x Febi Screw Plug (30075)
Important compatibility info
Weight | 0.4055 kg |
Length | 260 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (21356)
- 1x Febi Screw (32561)
- 1x Febi Nut (22263)
Important compatibility info
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Weight | 0.1 kg |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
for OE number | 61 66 1 380 068 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Weight | 0.472 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Length | 214 mm |
Additional Information | with counter nut |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.32 kg |
Length | 247 mm |
Height | 40 mm |
Width | 199 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023