Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 113 mm |
| Material | Thermoplast |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 88 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (15840)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Screw (05919)
- 1x Febi Circlip (03185)
- 1x Febi Spring Washer (07254)
- 1x Febi Molybdenum Grease (02582)
£15.72
Important compatibility info
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Manufacturer | FIAT FORD |
| Type | Brake Pad Set, disc brake |
| Length | 115 mm |
| Width | 55.4 mm |
| Model | 500 CINQUECENTO KA PANDA PUNTO SEICENTO |
| Replaces | 16754 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Thickness | 80 mm |
| Inner diameter | 17 mm |
| Outer diameter 1 | 24 mm |
| Outer diameter 2 | 55 mm |
| Function | Bush, spring eye |
| Placement on Vehicle | Rear Axle, Rear |
| Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 25 mm |
| Placement on Vehicle | inner, Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Function | V-Ribbed Belt |
| Length | 1655 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Knock Sensor |
| Type | Knock Sensor |
| for OE number | 1920.FR |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Knock Sensor |
| Type | Knock Sensor |
| for OE number | 5946.31 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Height | 87.6 mm |
| Material | Plastic |
| Outer diameter | 76.3 mm |
| Spanner Size | 29 |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Inner diameter 1 | 55 mm |
| Outer diameter 1 | 65 mm |
| Cooling Hose | from radiator to water pipe |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Length | 109 mm |
| Height | 187 mm |
| Width | 100 mm |
| Filter type | without connection for water sensor, In-Line Filter |
| Type | Fuel filter |
| Housing material | Plastic |
| Function | Fuel filter |
| Internal Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Width | 51 mm |
| Material | PU (Polyurethane) |
| Length | 108 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Placement on Vehicle | engine sided |
| Length | 1334 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| for OE number | 1 823 388 |
| Width | 22 mm |
| Number of Teeth | 117 |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.73
Important compatibility info
| Placement on Vehicle | both sides |
| Piston conrod diameter | 10 mm |
| Eject Force | 850 N |
| Stroke | 67 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, bonnet |
| Housing length | 149 mm |
| Housing Diameter | 22 mm |
| Length | 234 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.73
Important compatibility info
| Spanner Size | 17 |
| Paired article numbers | 102299 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M10 x 1,25 |
| Length | 225 mm |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.73
Important compatibility info
| Function | Tie Rod End |
| Paired article numbers | 102300 |
| Spanner Size | 17 |
| Placement on Vehicle | Front Axle Left |
| Length | 225 mm |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.73
Important compatibility info
| Placement on Vehicle | Lower |
| Length | 147 mm |
| Material | Plastic |
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Friction Lining Material | Plastic |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 310 mm |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 120 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 172 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Material | Metal |
| Outer diameter | 123 mm |
| Thickness | 21.5 mm |
| Inner diameter | 85 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Mounting points diameter | 10.5 mm |
| Replaces | 26082 |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 36736 |
| Additional Information | with nuts |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Cone Size | 19 mm |
| Replaced by | 26082 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (26082)
- 3x Febi Nut, Supporting / Ball Joint (36734)
£15.74
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Width | 69 mm |
| Thickness | 100 mm |
| Paired article numbers | 36302 |
| Rod/Strut | Coupling Rod |
| DIN / ISO | 985 |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Length | 307 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 305 mm |
| Housing Diameter | 15 mm |
| Eject Force | 130 N |
| Stroke | 111 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 167 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Function | Suspension, propshaft |
| Inner diameter | 30 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (02137)
£15.74
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 78 mm |
| Width | 72 mm |
| Material | Rubber/Metal |
| Outer diameter | 67 mm |
| Thickness | 78 mm |
| Inner diameter | 17 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Outer diameter | 46 mm |
| Opening Temperature | 91 °C |
| Function | Thermostat, coolant |
| Seal Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 7 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 85 mm |
| Inner diameter | 70 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 74 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Length | 95 mm |
| Placement on Vehicle | transmission sided, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45636)
- 1x Febi High Temperature Lubricant (03630)
£15.74
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023