Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Temperature Switch, radiator fan |
| Type | Temperature Switch, radiator fan |
| Switch Point | 95 °C |
Important compatibility info
| Int. teeth, diff.side, conn.to transm. | 33 |
| Type | Joint Kit, drive shaft |
| Length | 32 mm |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Length 1 | 1684 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Right Rear |
Important compatibility info
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Function | Intake Hose, air filter |
| Outer diameter 2 | 79 mm |
| Outer diameter 1 | 80 mm |
| Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Wheel Bearing Kit |
| Tightening Torque | 220 Nm |
| Width 1 | 48 mm |
| Outer diameter 1 | 55 mm |
| Inner diameter 1 | 25 mm |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 1 |
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Homologated |
| Brake System | Akebono |
| Width 1 | 160 mm |
| Number of wear indicators | 2 Per Axle |
| Thickness/Strength 1 | 17.5 mm |
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 49.3 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Thread Size | M10x1 |
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 253 mm |
| Thread Type | with internal thread |
Important compatibility info
| Additional Information | with banjo fitting |
| Thread Size | M10x1 |
| Function | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Length | 253 mm |
| Thread Type | with internal thread |
Important compatibility info
| Length | 531 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
Important compatibility info
| Function | Brake Hose |
| Length | 531 mm |
| Thread Type | with internal thread |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with banjo fitting |
Important compatibility info
| Inner diameter | 19.05 mm |
| Material | Plastic |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with internal thread |
| Thread Measurement 2 | M15X1.5 |
| Length | 354 mm |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 354 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Additional Information | with gaskets/seals |
| Number of Teeth | 23 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 21 mm |
Important compatibility info
| Function | Brake Hose |
| Length | 177 mm |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle, Right, inner |
| Thread Type | with internal thread, with external thread |
Important compatibility info
| Bearing Code | Gen 0 |
| Inner diameter 1 | 25.5 mm |
| Inner diameter 2 | 16 mm |
| Outer diameter 1 | 51 mm |
| Width 1 | 15 mm |
| Outer diameter 2 | 41 mm |
| Width 2 | 15 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Thread Size | M10x1 |
| Additional Information | with banjo fitting |
| Length 1 | 202 mm |
| Length 2 | 523 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Type | with external thread |
| Additional Information 2 | with banjo bolt |
| Mounting Bolt Thread Size | M12x1 |
Important compatibility info
| Thread Type | with external thread |
| Length 1 | 202 mm |
| Length 2 | 523 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Additional Information | with banjo fitting |
| Type | Brake Hose |
| Additional Information 2 | with banjo bolt |
| Mounting Bolt Thread Size | M12x1 |
Important compatibility info
| Impeller Diameter | 63.9 mm |
| Water Pump Pulley Diameter | 57 mm |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Number of Teeth | 19 |
| Number of Wings | 8 |
| Height | 52.5 mm |
| Type | Water Pump, engine cooling |
| Replaces | BWP1933; BWP2068; BWP2231 |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Length | 122 mm |
| Material | Thermoplast |
| Inner diameter 2 | 90 mm |
| Inner diameter 1 | 30 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















