Proud to be a UK-based company
Contact us
Important compatibility info
| Joint Type | CV Joint |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Length | 113 mm |
| Material | Thermoplast |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 97 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.72
Important compatibility info
| Spanner Size | 24 |
| Number of Connectors / Ports | 2 |
| External Thread Size | M16 x 1,5 |
| Function | Oil Pressure Switch |
| Switch point to | 5 bar |
| Type | Oil Pressure Switch |
| Length | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.72
Important compatibility info
| Height | 68 mm |
| Outer diameter | 81 mm |
| Additional Information 2 | with seal ring |
| Filter type | Filter Insert |
| Spanner Size | 30 |
| Transmission Type | 8-Speed Dual-Clutch Transmission |
| Bolt Head/Nut Design | External Hexagon |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.72
Important compatibility info
| Material | FPM (fluoride rubber), Aluminium |
| Function | Gasket, oil cooler |
| Type | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.72
Important compatibility info
| External Thread Size | M20 x 1,5, M14 x 1,5 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle |
| Length | 95 mm |
| Paired article numbers | 03387 |
| Thread Type | with left-hand thread |
| Cone Size | 18 mm |
| Pipe Diameter | 24 mm |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| for OE number | 32 21 1 096 327 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 190 mm |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Material | Plastic |
| Placement on Vehicle | Lower |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 190 mm |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 233 mm |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M22 x 1,5 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,75 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 108 mm |
| Paired article numbers | 34901 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 44 mm. 25 mm |
| Thickness | 46 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Housing Diameter | 18 mm |
| Eject Force | 420 N |
| Stroke | 205 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 269.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Width | 19.8 mm |
| Number of Teeth | 97 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Function | Gasket, cylinder head |
| Thickness | 1.9 mm |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15.3 mm |
| Wear Warning Contact | excl. wear warning contact |
| Width | 56.5 mm |
| Length | 61.7 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| for OE number | 32 41 1 095 526 |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
| Inner diameter | 16 mm |
| Additional Information 2 | with outer fabric belt |
| Placement on Vehicle | from fluid reservoir to hydraulic pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 279 mm |
| Housing Diameter | 18 mm |
| Eject Force | 510 N |
| Stroke | 72 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 171.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 125 mm |
| Material | Thermoplast |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 92 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29199)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45644)
- 1x Febi Circlip (29202)
- 2x Febi Molybdenum Grease (02582)
£16.73
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023