Proud to be a UK-based company
Contact us
Important compatibility info
| Thickness | 230 mm |
| Colour | Yellow |
| DIN / ISO | 76051 |
| Length | 470 mm |
| Additional Information 2 | Handle in housing |
| Function | Wheel Chock |
| Width | 200 mm |
| Material | Plastic |
| Radius | 555 mm |
| Type | Wheel Chock |
| Axle Load to | 13 t |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Outer diameter 1 | 19 mm |
| Outer diameter 2 | 42 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle, outer |
| Inner diameter | 16 mm |
| Length | 130 mm |
| Hole Spacing | 100 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 150 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Length | 260 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle Right |
| Material | Thermoplast |
| Inner diameter 1 | 37 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 116 mm |
| Inner diameter 2 | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172863)
- 1x Febi Molybdenum Grease (02582)
£17.43
Important compatibility info
| Material | Metal, Plastic |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.43
Important compatibility info
| Placement on Vehicle | both sides, Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Inner diameter | 14.4 mm |
| Thickness | 62 mm |
| Outer diameter | 62 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.44
Important compatibility info
| Valve stem diameter | 9 mm |
| Length | 159 mm |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
| Notches / Holes Number | 1 |
| Valve head diameter | 42.55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.44
Important compatibility info
| Type | Camber Correction Screw |
| Function | Camber Correction Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camber Correction Screw (178648)
- 1x Febi Washer (40789)
- 1x Febi Nut (34653)
£17.44
Important compatibility info
| Number of Connectors / Ports | 3 |
| Connector Shape | triangular |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
| Switching temperature range 1 from | 87 °C |
| Switching temperature range 1 to | 97 °C |
| Switching temperature range 2 from | 97 °C |
| Switching temperature range 2 to | 102 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| Length | 312 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 36506 |
| Internal Thread Size | M16 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Length | 208 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36119)
- 1x Febi Nut (36120)
£17.45
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 36507 |
| External Thread Size | M12 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Length | 208 mm |
| Spanner Size | 24 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (36118)
- 1x Febi Nut (36120)
£17.45
Important compatibility info
| Bolt Head/Nut Design | Male Torx |
| Function | Cylinder Head Bolt Set |
| Type | Cylinder Head Bolt Set |
| for OE number | 51.90490.0024 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Bolt (11726)
- 3x Febi Cylinder Head Bolt (11725)
- 2x Febi Cylinder Head Bolt (11724)
£17.45
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Diameter | 1 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 28 mm |
| Rod/Strut | Coupling Rod |
| Thickness | 55 mm |
| Outer diameter | 9 mm |
| Material | Steel |
| Length | 264 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1706 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 53 mm |
| Width | 46 mm |
| Material | Rubber/Metal |
| Thickness | 50 mm |
| Inner diameter | 33.5 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.45
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
Important compatibility info
| Width | 50 mm |
| Material | Rubber/Metal |
| Outer diameter | 75 mm |
| Thickness | 12.5 mm |
| Inner diameter | 50 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
Important compatibility info
| Length | 250 mm |
| Outer diameter | 56 mm |
| Filter type | In-Line Filter |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
Important compatibility info
| Filter type | Filter Insert |
| Function | Fuel filter |
| Outer diameter | 123 mm |
| Height | 134 mm |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
Important compatibility info
| Length | 248 mm |
| Height | 45 mm |
| Width | 200 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
Important compatibility info
| Length | 1215 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
Important compatibility info
| Tightening Torque | 35 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
| Height | 90.2 mm |
| Outer diameter | 96 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 32 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.46
Important compatibility info
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.47
Important compatibility info
| Placement on Vehicle | Lower Right |
| Extra Description | febi Plus |
| Paired article numbers | 171024 |
| Function | Roller Guide, sliding door |
| Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.47
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 340 mm |
| Paired article numbers | 185406 |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.47
Important compatibility info
| Length | 102 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
| Width | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.47
Important compatibility info
| Additional Information 2 | with mounting sleeve |
| Width | 8.5 mm |
| Type | Shaft Seal, crankshaft |
| Outer diameter | 104 mm |
| Inner diameter | 90 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Placement on Vehicle | transmission sided |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.47
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Length | 265.5 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.47
Important compatibility info
| External Thread Size | M18 x 1,5, M16 x 1,5 |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 330 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| for OE number | 31280409 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023