Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 248 mm |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Inner diameter 1 | 38 mm |
| Inner diameter 2 | 67 mm |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Material | Rubber |
| Length | 100 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (30964)
- 1x Febi Nut, kingpin (01841)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
£17.74
Important compatibility info
| Function | Gasket, cylinder head cover |
| Thickness | 7 mm |
| Material | ACM (Polyacrylate) |
| Placement on Vehicle | Right |
| Length | 579 mm |
| Width | 8 mm |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.74
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Lower |
| Cone Size | 16 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Cone Size 1 | 13.4 mm |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.74
Important compatibility info
| Number of Ribs | 7 |
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt |
| Length | 1570 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.74
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Cone Size | 14.5 mm |
| Function | Ball Joint |
| Mounting points diameter | 8.5 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 338 mm |
| Internal Thread Size | M14 x 1,5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Replaces | 44722 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Height | 40 mm |
| Width | 80 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 10 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 06J 103 213 B |
| Hose Length | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 36877 |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Cone Size | 20 mm |
| Mounting points diameter | 17.4 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| External Thread Size | M12 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing, with fastening material |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| for OE number | 5031.77 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19495)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£17.76
Important compatibility info
| Placement on Vehicle | Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Holder, engine mounting system |
| Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Lower Right |
| Outer diameter | 25 mm |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Outer diameter | 175 mm |
| Thickness | 27 mm |
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (05352)
- 1x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Seal Ring, wheel hub (08008)
£17.76
Important compatibility info
| Screw length below head | 17 mm |
| Function | Thrust Roller, release fork |
| Outer diameter | 30 mm |
| Height | 39 mm |
| Type | Thrust Roller, release fork |
| Inner diameter | 16 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 70 mm |
| Width | 70 mm |
| Material | Rubber/Metal |
| Outer diameter | 75 mm |
| Thickness | 75 mm |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Length | 1766 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 84 mm |
| Function | Mounting, stabiliser bar |
| Thickness | 68.9 mm |
| Inner diameter | 36.8 mm |
| Type | Mounting, stabiliser bar |
| Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (186114)
- 2x Febi Protective Cap/Bellow, shock absorber (01367)
£17.76
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 202 mm |
| Additional Information | with lock nut |
| Spanner Size | 21 |
| Paired article numbers | 197253 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023