Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 17 mm |
| Outer diameter | 80 mm |
| Material | Plastic |
| Width | 27 mm |
| Width of castor bearing surface | 21.60 mm |
| Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.05
Important compatibility info
| Outer diameter | 102 mm |
| Paired article numbers | 181322 |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Length | 312 mm |
| Placement on Vehicle | Rear Axle |
| Number of Coils | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.05
Important compatibility info
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.05
Important compatibility info
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 96 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 72 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (18779)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38764)
- 1x Febi Molybdenum Grease (02582)
£18.06
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 19.6 mm |
| Mounting points diameter | 10.5 mm |
| Type | Ball Joint |
| Additional Information 2 | with washers, with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Length | 80 mm |
| Width | 53 mm |
| Material | Rubber/Metal |
| Outer diameter | 53 mm |
| Thickness | 80 mm |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.4 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.06
Important compatibility info
| Outer diameter | 61 mm |
| Length | 169 mm |
| Height | 61 mm |
| Width | 61 mm |
| Filter type | In-Line Filter |
| Seal Diameter | 23 mm |
| Pressure | 6.6 bar |
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.06
Important compatibility info
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Mounting points diameter | 10.5 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Placement on Vehicle | Rear Axle, inner |
| Material | Rubber/Metal |
| Outer diameter | 85 mm |
| Thickness | 72 mm |
| Inner diameter | 50 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Outer diameter | 82 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Camber correction | 0 ° |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Material | Aluminium |
| Outer diameter | 53 mm. 39.4 mm |
| Thickness | 52 mm. 32 mm |
| Inner diameter | 10.3 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Function | Tie Rod End |
| Cone Size 2 | 15 mm |
| Cone Size 1 | 13 mm |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with crown nut |
| Spanner Size | 22 |
| Paired article numbers | 183070 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 289 mm |
| Diameter | 26 mm |
| Material | Steel |
| Thickness | 10 mm |
| Spanner Size | 5 |
| Rod/Strut | Coupling Rod |
| Thread Length | 38.5 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Diameter | 1 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| External Thread Size | M12 x 1,75 |
| Material | Steel |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Thread Length | 31 mm |
| Spanner Size | 18 |
| Length | 183 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 130 mm |
| Additional Information | with lock nut |
| Spanner Size | 22 |
| Paired article numbers | 188517 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.07
Important compatibility info
| Outer diameter | 121 mm |
| Height | 140 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.08
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Thickness/Strength 1 | 15 mm |
| Wear Warning Contact | with acoustic wear warning |
| Width | 42.5 mm |
| Length | 107.8 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.09
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (09103)
- 4x Febi Seal Ring, spark plug shaft (31721)
£18.09
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 2025 mm |
| Paired article numbers | 34395 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.09
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | inner |
| Width | 30 mm |
| Inner diameter | 55 mm |
| Outer diameter | 95 mm |
| Bearing Code | 33111 |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.09
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023